From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
Date: Tue, 22 Jan 2013 02:49:04 +0100 [thread overview]
Message-ID: <201301220249.04554.marex@denx.de> (raw)
In-Reply-To: <1358819250-31625-8-git-send-email-otavio@ossystems.com.br>
Dear Otavio Salvador,
Description missing.
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> include/configs/mx23_olinuxino.h | 90
> +++++++++++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+),
> 1 deletion(-)
>
> diff --git a/include/configs/mx23_olinuxino.h
> b/include/configs/mx23_olinuxino.h index a62e3a2..7d34168 100644
> --- a/include/configs/mx23_olinuxino.h
> +++ b/include/configs/mx23_olinuxino.h
> @@ -140,9 +140,97 @@
> #define CONFIG_SETUP_MEMORY_TAGS
> #define CONFIG_BOOTDELAY 3
> #define CONFIG_BOOTFILE "uImage"
> -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
No need to remove this.
> #define CONFIG_LOADADDR 0x42000000
> #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> #define CONFIG_OF_LIBFDT
>
> +/*
> + * Extra Environments
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "update_sd_firmware_filename=u-boot.sd\0" \
> + "update_nand_full_filename=u-boot.nand\0" \
> + "update_nand_firmware_filename=u-boot.sb\0" \
> + "update_sd_firmware_filename=u-boot.sd\0" \
> + "update_nand_firmware_maxsz=0x100000\0" \
> + "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
> + "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
> + "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
This board has no NAND.
Best regards,
Marek Vasut
next prev parent reply other threads:[~2013-01-22 1:49 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 1:47 [U-Boot] [PATCH 0/9] iMX23 MMC support and environment addition Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 1/9] mx23: Add SSP registers map Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode Otavio Salvador
2013-01-22 1:45 ` Marek Vasut
2013-01-22 1:53 ` Otavio Salvador
2013-01-22 2:01 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI Otavio Salvador
2013-01-22 1:46 ` Marek Vasut
2013-01-22 1:55 ` Otavio Salvador
2013-01-22 2:00 ` Marek Vasut
2013-01-24 18:14 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 4/9] mx23evk: Add initial board support Otavio Salvador
2013-01-22 1:46 ` Marek Vasut
2013-01-22 2:02 ` Otavio Salvador
2013-01-22 2:16 ` Marek Vasut
2013-01-22 2:30 ` Fabio Estevam
2013-01-22 2:42 ` Marek Vasut
2013-01-22 10:05 ` Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support Otavio Salvador
2013-01-22 1:47 ` Marek Vasut
2013-01-22 1:58 ` Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection Otavio Salvador
2013-01-22 1:48 ` Marek Vasut
2013-01-22 1:58 ` Otavio Salvador
2013-01-22 1:59 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment Otavio Salvador
2013-01-22 1:49 ` Marek Vasut [this message]
2013-01-22 2:00 ` Otavio Salvador
2013-01-22 2:34 ` Fabio Estevam
2013-01-22 1:47 ` [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23 Otavio Salvador
2013-01-22 1:49 ` Marek Vasut
2013-01-22 2:03 ` Otavio Salvador
2013-01-22 2:15 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC Otavio Salvador
2013-01-22 1:50 ` Marek Vasut
2013-01-22 1:56 ` Otavio Salvador
2013-01-22 1:59 ` Marek Vasut
2013-01-23 9:04 ` Stefano Babic
2013-01-23 11:05 ` Otavio Salvador
2013-01-23 11:26 ` Marek Vasut
2013-01-23 11:39 ` Stefano Babic
2013-01-23 11:48 ` Marek Vasut
2013-01-23 12:12 ` Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201301220249.04554.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox