From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Wed, 23 Jan 2013 11:02:05 +0100 Subject: [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option In-Reply-To: <1358934007-14928-2-git-send-email-michal.simek@xilinx.com> References: <1358934007-14928-1-git-send-email-michal.simek@xilinx.com> <1358934007-14928-2-git-send-email-michal.simek@xilinx.com> Message-ID: <20130123100205.936402005FD@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Michal Simek, In message <1358934007-14928-2-git-send-email-michal.simek@xilinx.com> you wrote: > CONFIG_ARM_DCC_MULTI should be also removed in the patch > "serial: Remove CONFIG_SERIAL_MULTI from serial drivers" > (sha1: a3827250606895ec2dd4b8d867342b7cabf3692f) > Because the driver defines serial_* functions > which cause conflict with serial.c (multiple definition of serial_*) > > Removing CONFIG_SERIAL_MULTI function also require to define > default_serial_console for cases where another serial driver > is not available in the system. As you pointed out in the cover letter, CONFIG_ARM_DCC and CONFIG_ARM_DCC_MULTI are nowhere defined in any mainline U-Boot code. Instead of fixing and keeping the dead code, we should rather remove the drivers/serial/arm_dcc.c driver and all references to CONFIG_ARM_DCC* If you want, I can prepare a cleanup patch. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Q: Do you know what the death rate around here is? A: One per person.