[U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation

[Marek Vasut <marex@denx.de>]

Dear Stefano Babic,

> On 23/01/2013 02:01, Marek Vasut wrote:
> > Some MXS based boards do not implement the card-detect signal. Allow
> > user to specify alternate card-detect implementation.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Otavio Salvador <otavio@ossystems.com.br>
> > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > ---
> > 
> >  arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
> >  board/bluegiga/apx4devkit/apx4devkit.c    |    2 +-
> >  board/denx/m28evk/m28evk.c                |    2 +-
> >  board/freescale/mx28evk/mx28evk.c         |    2 +-
> >  board/schulercontrol/sc_sps_1/sc_sps_1.c  |    2 +-
> >  drivers/mmc/mxsmmc.c                      |   16 ++++++++++++++--
> >  6 files changed, 19 insertions(+), 7 deletions(-)
> > 
> > diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h
> > b/arch/arm/include/asm/arch-mxs/sys_proto.h index 8aaf196..5bafde5
> > 100644
> > --- a/arch/arm/include/asm/arch-mxs/sys_proto.h
> > +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
> > @@ -31,7 +31,7 @@ int mxs_wait_mask_clr(struct mxs_register_32 *reg,
> > 
> >  		       uint32_t mask,
> >  		       unsigned int timeout);
> > 
> > -int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int));
> > +int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int
> > (*cd)(int));
> > 
> >  #ifdef CONFIG_SPL_BUILD
> > 
> > diff --git a/board/bluegiga/apx4devkit/apx4devkit.c
> > b/board/bluegiga/apx4devkit/apx4devkit.c index 029b973..5927693 100644
> > --- a/board/bluegiga/apx4devkit/apx4devkit.c
> > +++ b/board/bluegiga/apx4devkit/apx4devkit.c
> > @@ -69,7 +69,7 @@ int board_init(void)
> > 
> >  #ifdef CONFIG_CMD_MMC
> >  int board_mmc_init(bd_t *bis)
> >  {
> > 
> > -	return mxsmmc_initialize(bis, 0, NULL);
> > +	return mxsmmc_initialize(bis, 0, NULL, NULL);
> 
> I see, but it seems to me that mxs is doing different as other SOCs. If
> there is nothing to set, cpu_mmc_init() should be used, dropping
> board_mmc_init(). And we implement board_mmc_init() only for boards that
> really need it, not for all.

That's also an option ... do you want subsequent patch or respin of the series?

Best regards,
Marek Vasut