[U-Boot] u-boot build error [from v2013.01 onwards]

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi,

I am getting below error while configuring any board in the u-boot.

bash> make versatilepb_config
Makefile:597: *** missing `endif'.  Stop.

Host setup:
----------------
Processor: x86_64
OS: Red Hat Enterprise Linux Client release 5.6
u-boot version: v2013.01

Request for any help.

Thanks,
Jagan.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Albert ARIBAUD]

Hi Jagan,

On Sat, 26 Jan 2013 18:34:56 +0530, Jagan Teki
<jagannadh.teki@gmail.com> wrote:

> Hi,
> 
> I am getting below error while configuring any board in the u-boot.
> 
> bash> make versatilepb_config
> Makefile:597: *** missing `endif'.  Stop.
> 
> Host setup:
> ----------------
> Processor: x86_64
> OS: Red Hat Enterprise Linux Client release 5.6
> u-boot version: v2013.01
> 
> Request for any help.

Can you indicate which target you are building, with which command line
exactly, and which toolchain you are using?

> Thanks,
> Jagan.

Amicalement,
-- 
Albert.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi Albert

On Sat, Jan 26, 2013 at 9:40 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Jagan,
>
> On Sat, 26 Jan 2013 18:34:56 +0530, Jagan Teki
> <jagannadh.teki@gmail.com> wrote:
>
>> Hi,
>>
>> I am getting below error while configuring any board in the u-boot.
>>
>> bash> make versatilepb_config
>> Makefile:597: *** missing `endif'.  Stop.
>>
>> Host setup:
>> ----------------
>> Processor: x86_64
>> OS: Red Hat Enterprise Linux Client release 5.6
>> u-boot version: v2013.01
>>
>> Request for any help.
>
> Can you indicate which target you are building, with which command line
> exactly, and which toolchain you are using?

This error occurred for all boards in the u-boot, I have used
arm-none-linux-gnueabi- xtool for versatilepb board.
I saw this issue specially from 2013.01 on-wards.

Thanks,
Jagan.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Vikram Narayanan]

On 1/27/2013 7:10 AM, Jagan Teki wrote:
> This error occurred for all boards in the u-boot, I have used
> arm-none-linux-gnueabi- xtool for versatilepb board.
> I saw this issue specially from 2013.01 on-wards.

Can you check your host setup once?

Below is the output from my setup. I don't see any error.

$ git describe 
v2013.01
$ make ARCH=arm versatilepb_config
Configuring for versatilepb - Board: versatile, Options: ARCH_VERSATILE_PB
$ lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 11.04
Release:	11.04
Codename:	natty

~Vikram

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi Vikram,

On Sun, Jan 27, 2013 at 9:24 AM, Vikram Narayanan <vikram186@gmail.com> wrote:
> On 1/27/2013 7:10 AM, Jagan Teki wrote:
>> This error occurred for all boards in the u-boot, I have used
>> arm-none-linux-gnueabi- xtool for versatilepb board.
>> I saw this issue specially from 2013.01 on-wards.
>
> Can you check your host setup once?
>
> Below is the output from my setup. I don't see any error.
>
> $ git describe
> v2013.01
> $ make ARCH=arm versatilepb_config
> Configuring for versatilepb - Board: versatile, Options: ARCH_VERSATILE_PB
> $ lsb_release -a
> No LSB modules are available.
> Distributor ID: Ubuntu
> Description:    Ubuntu 11.04
> Release:        11.04
> Codename:       natty

Here is my LSB host settings

Mr.J> lsb_release -a
LSB Version:
:core-4.0-amd64:core-4.0-ia32:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-ia32:printing-4.0-noarch
Distributor ID: RedHatEnterpriseClient
Description:    Red Hat Enterprise Linux Client release 5.6 (Tikanga)
Release:        5.6
Codename:       Tikanga

I am getting same error irrespective any board.
Does v2013.01 release builds depends on any perl versions

Mr.J> perl -v
This is perl, v5.8.5 built for x86_64-linux

Thanks,
Jagan.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Albert ARIBAUD]

Hi Jagan,

On Sun, 27 Jan 2013 12:30:45 +0530, Jagan Teki
<jagannadh.teki@gmail.com> wrote:

> Hi Vikram,
> 
> On Sun, Jan 27, 2013 at 9:24 AM, Vikram Narayanan <vikram186@gmail.com> wrote:
> > On 1/27/2013 7:10 AM, Jagan Teki wrote:
> >> This error occurred for all boards in the u-boot, I have used
> >> arm-none-linux-gnueabi- xtool for versatilepb board.
> >> I saw this issue specially from 2013.01 on-wards.
> >
> > Can you check your host setup once?
> >
> > Below is the output from my setup. I don't see any error.
> >
> > $ git describe
> > v2013.01
> > $ make ARCH=arm versatilepb_config
> > Configuring for versatilepb - Board: versatile, Options: ARCH_VERSATILE_PB
> > $ lsb_release -a
> > No LSB modules are available.
> > Distributor ID: Ubuntu
> > Description:    Ubuntu 11.04
> > Release:        11.04
> > Codename:       natty
> 
> Here is my LSB host settings
> 
> Mr.J> lsb_release -a
> LSB Version:
> :core-4.0-amd64:core-4.0-ia32:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-ia32:printing-4.0-noarch
> Distributor ID: RedHatEnterpriseClient
> Description:    Red Hat Enterprise Linux Client release 5.6 (Tikanga)
> Release:        5.6
> Codename:       Tikanga
> 
> I am getting same error irrespective any board.
> Does v2013.01 release builds depends on any perl versions
> 
> Mr.J> perl -v
> This is perl, v5.8.5 built for x86_64-linux

Actually I'd be more interested in the result of the following commands:

1)	$CROSS_COMPILE}gcc -v

2)	git rev-parse HEAD

3)	git clean -xfd
	git status

> Thanks,
> Jagan.

Amicalement,
-- 
Albert.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi Albert,

Please find the below comments.

On Sun, Jan 27, 2013 at 8:44 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Jagan,
>
> On Sun, 27 Jan 2013 12:30:45 +0530, Jagan Teki
> <jagannadh.teki@gmail.com> wrote:
>
>> Hi Vikram,
>>
>> On Sun, Jan 27, 2013 at 9:24 AM, Vikram Narayanan <vikram186@gmail.com> wrote:
>> > On 1/27/2013 7:10 AM, Jagan Teki wrote:
>> >> This error occurred for all boards in the u-boot, I have used
>> >> arm-none-linux-gnueabi- xtool for versatilepb board.
>> >> I saw this issue specially from 2013.01 on-wards.
>> >
>> > Can you check your host setup once?
>> >
>> > Below is the output from my setup. I don't see any error.
>> >
>> > $ git describe
>> > v2013.01
>> > $ make ARCH=arm versatilepb_config
>> > Configuring for versatilepb - Board: versatile, Options: ARCH_VERSATILE_PB
>> > $ lsb_release -a
>> > No LSB modules are available.
>> > Distributor ID: Ubuntu
>> > Description:    Ubuntu 11.04
>> > Release:        11.04
>> > Codename:       natty
>>
>> Here is my LSB host settings
>>
>> Mr.J> lsb_release -a
>> LSB Version:
>> :core-4.0-amd64:core-4.0-ia32:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-ia32:printing-4.0-noarch
>> Distributor ID: RedHatEnterpriseClient
>> Description:    Red Hat Enterprise Linux Client release 5.6 (Tikanga)
>> Release:        5.6
>> Codename:       Tikanga
>>
>> I am getting same error irrespective any board.
>> Does v2013.01 release builds depends on any perl versions
>>
>> Mr.J> perl -v
>> This is perl, v5.8.5 built for x86_64-linux
>
> Actually I'd be more interested in the result of the following commands:
>
> 1)      $CROSS_COMPILE}gcc -v

Mr.J> ${CROSS_COMPILE}gcc -v
Using built-in specs.
Target: arm-none-linux-gnueabi
....
Thread model: posix
gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202)

>
> 2)      git rev-parse HEAD

Mr.J> git rev-parse HEAD
54b08efcf2f4ff532ce99c53f341a59c193331a5

>
> 3)      git clean -xfd
>         git status

Mr.J> git clean -xfd
Removing .boards.depend
Removing LOG/
Removing arch/arm/include/asm/arch
Removing arch/arm/include/asm/proc
Removing arm-none-linux-gnueabi-gcc
Removing include/asm
Removing include/config.h
Removing include/config.mk
Removing include/generated/

Mr.J> git status
# On branch master
nothing to commit (working directory clean)

Mr.J> ./MAKEALL versatilepb_config
Makefile:597: *** missing `endif'.  Stop.
Makefile:597: *** missing `endif'.  Stop.
arm-none-linux-gnueabi-size: './u-boot': No such file
Makefile:597: *** missing `endif'.  Stop.

--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with warnings but no errors: 1 ( versatilepb_config )
----------------------------------------------------------

Thanks,
Jagan.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Wolfgang Denk]

Dear Jagan Teki,

In message <CAD6G_RS1bV_8z_J0QEjbNooy=6+Zxi0faXjxNr1fN4U2ajbObg@mail.gmail.com> you wrote:
> 
> > Actually I'd be more interested in the result of the following commands:
> >
> > 1)      $CROSS_COMPILE}gcc -v
> 
> Mr.J> ${CROSS_COMPILE}gcc -v
> Using built-in specs.
> Target: arm-none-linux-gnueabi
> ....
> Thread model: posix
> gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202)

Well, the actual error comes from the Makefile, so gcc should not be
involved here...

> Mr.J> git rev-parse HEAD
> 54b08efcf2f4ff532ce99c53f341a59c193331a5

Looks clean.

> Mr.J> git status
> # On branch master
> nothing to commit (working directory clean)
> 
> Mr.J> ./MAKEALL versatilepb_config
> Makefile:597: *** missing `endif'.  Stop.
> Makefile:597: *** missing `endif'.  Stop.
> arm-none-linux-gnueabi-size: './u-boot': No such file
> Makefile:597: *** missing `endif'.  Stop.

You should get this instead:

-> ./MAKEALL versatilepb_config
make: *** No rule to make target `versatilepb_config_config'.  Stop.
make: *** [versatilepb_config_config] Error 1
make: *** [all] Error 1
arm-linux-gnueabi-size: './u-boot': No such file
System not configured - see README
make: *** [all] Error 1

--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with errors: 1 ( versatilepb_config )
----------------------------------------------------------


Note that the correct name with MAKEALL is the board target name
_without_ the "_config" part.  What does "make -v" report for you?
[GNU Make 3.82 on my end.]

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
[War] is instinctive. But the instinct can  be  fought.  We're  human
beings  with the blood of a million savage years on our hands! But we
can stop it. We can admit that we're killers ... but we're not  going
to  kill  today. That's all it takes! Knowing that we're not going to
kill today!
	-- Kirk, "A Taste of Armageddon", stardate 3193.0

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi Wolfgang Denk,

On Mon, Jan 28, 2013 at 12:29 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear Jagan Teki,
>
> In message <CAD6G_RS1bV_8z_J0QEjbNooy=6+Zxi0faXjxNr1fN4U2ajbObg@mail.gmail.com> you wrote:
>>
>> > Actually I'd be more interested in the result of the following commands:
>> >
>> > 1)      $CROSS_COMPILE}gcc -v
>>
>> Mr.J> ${CROSS_COMPILE}gcc -v
>> Using built-in specs.
>> Target: arm-none-linux-gnueabi
>> ....
>> Thread model: posix
>> gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202)
>
> Well, the actual error comes from the Makefile, so gcc should not be
> involved here...
>
>> Mr.J> git rev-parse HEAD
>> 54b08efcf2f4ff532ce99c53f341a59c193331a5
>
> Looks clean.
>
>> Mr.J> git status
>> # On branch master
>> nothing to commit (working directory clean)
>>
>> Mr.J> ./MAKEALL versatilepb_config
>> Makefile:597: *** missing `endif'.  Stop.
>> Makefile:597: *** missing `endif'.  Stop.
>> arm-none-linux-gnueabi-size: './u-boot': No such file
>> Makefile:597: *** missing `endif'.  Stop.
>
> You should get this instead:
>
> -> ./MAKEALL versatilepb_config
> make: *** No rule to make target `versatilepb_config_config'.  Stop.
> make: *** [versatilepb_config_config] Error 1
> make: *** [all] Error 1
> arm-linux-gnueabi-size: './u-boot': No such file
> System not configured - see README
> make: *** [all] Error 1
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> Boards with errors: 1 ( versatilepb_config )
> ----------------------------------------------------------
>
>
> Note that the correct name with MAKEALL is the board target name
> _without_ the "_config" part.  What does "make -v" report for you?
> [GNU Make 3.82 on my end.]

Thanks for your note.
GNU Make is 3.80 at my end.

Thanks,
Jagan.

> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> [War] is instinctive. But the instinct can  be  fought.  We're  human
> beings  with the blood of a million savage years on our hands! But we
> can stop it. We can admit that we're killers ... but we're not  going
> to  kill  today. That's all it takes! Knowing that we're not going to
> kill today!
>         -- Kirk, "A Taste of Armageddon", stardate 3193.0

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi,

On Mon, Jan 28, 2013 at 1:31 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> Hi Wolfgang Denk,
>
> On Mon, Jan 28, 2013 at 12:29 PM, Wolfgang Denk <wd@denx.de> wrote:
>> Dear Jagan Teki,
>>
>> In message <CAD6G_RS1bV_8z_J0QEjbNooy=6+Zxi0faXjxNr1fN4U2ajbObg@mail.gmail.com> you wrote:
>>>
>>> > Actually I'd be more interested in the result of the following commands:
>>> >
>>> > 1)      $CROSS_COMPILE}gcc -v
>>>
>>> Mr.J> ${CROSS_COMPILE}gcc -v
>>> Using built-in specs.
>>> Target: arm-none-linux-gnueabi
>>> ....
>>> Thread model: posix
>>> gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202)
>>
>> Well, the actual error comes from the Makefile, so gcc should not be
>> involved here...
>>
>>> Mr.J> git rev-parse HEAD
>>> 54b08efcf2f4ff532ce99c53f341a59c193331a5
>>
>> Looks clean.
>>
>>> Mr.J> git status
>>> # On branch master
>>> nothing to commit (working directory clean)
>>>
>>> Mr.J> ./MAKEALL versatilepb_config
>>> Makefile:597: *** missing `endif'.  Stop.
>>> Makefile:597: *** missing `endif'.  Stop.
>>> arm-none-linux-gnueabi-size: './u-boot': No such file
>>> Makefile:597: *** missing `endif'.  Stop.
>>
>> You should get this instead:
>>
>> -> ./MAKEALL versatilepb_config
>> make: *** No rule to make target `versatilepb_config_config'.  Stop.
>> make: *** [versatilepb_config_config] Error 1
>> make: *** [all] Error 1
>> arm-linux-gnueabi-size: './u-boot': No such file
>> System not configured - see README
>> make: *** [all] Error 1
>>
>> --------------------- SUMMARY ----------------------------
>> Boards compiled: 1
>> Boards with errors: 1 ( versatilepb_config )
>> ----------------------------------------------------------
>>
>>
>> Note that the correct name with MAKEALL is the board target name
>> _without_ the "_config" part.  What does "make -v" report for you?
>> [GNU Make 3.82 on my end.]
>
> Thanks for your note.
> GNU Make is 3.80 at my end.

I have just upgraded my Make from 3.80 to 3.81..
u-boot build works fine.

Thanks,
Jagan.

>
> Thanks,
> Jagan.
>
>> Best regards,
>>
>> Wolfgang Denk
>>
>> --
>> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
>> [War] is instinctive. But the instinct can  be  fought.  We're  human
>> beings  with the blood of a million savage years on our hands! But we
>> can stop it. We can admit that we're killers ... but we're not  going
>> to  kill  today. That's all it takes! Knowing that we're not going to
>> kill today!
>>         -- Kirk, "A Taste of Armageddon", stardate 3193.0

[U-Boot] u-boot build error [from v2013.01 onwards]

[Wolfgang Denk]

Dear Jagan Teki,

In message <CAD6G_RSuMebC=aiPpdMo5mXUGHeftMi-BTvkVmhu5y8xYpW_MA@mail.gmail.com> you wrote:
> 
> > Note that the correct name with MAKEALL is the board target name
> > _without_ the "_config" part.  What does "make -v" report for you?
> > [GNU Make 3.82 on my end.]
> 
> Thanks for your note.
> GNU Make is 3.80 at my end.

Well... make v3.80 is more than 10 years old (10/04/2002).

Can you please try with a less antiquated version and see if this
helps?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Veni, Vidi, VISA:
        I came, I saw, I did a little shopping.

[U-Boot] u-boot build error [from v2013.01 onwards]

[Wolfgang Denk]

Dear Jagan Teki,

In message <CAD6G_RQv2JH8N6UDjtuakU-s9auhVENRnEfwnEgNk_oUnepiwA@mail.gmail.com> you wrote:
> 
> > GNU Make is 3.80 at my end.
> 
> I have just upgraded my Make from 3.80 to 3.81..
> u-boot build works fine.

Ah, thanks for reporting.

But please note that v3.81 is still 7 years old.  Why don't you use
recent code (v3.82, wich actually is already 2.5 yeards old as well)?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Voodoo Programming: Things programmers do that  they  know  shouldn't
work  but they try anyway, and which sometimes actually work, such as
recompiling everything.                             - Karl Lehenbauer

[U-Boot] u-boot build error [from v2013.01 onwards]

[Jagan Teki]

Hi Wolfgang Denk,

On Mon, Jan 28, 2013 at 5:04 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear Jagan Teki,
>
> In message <CAD6G_RQv2JH8N6UDjtuakU-s9auhVENRnEfwnEgNk_oUnepiwA@mail.gmail.com> you wrote:
>>
>> > GNU Make is 3.80 at my end.
>>
>> I have just upgraded my Make from 3.80 to 3.81..
>> u-boot build works fine.
>
> Ah, thanks for reporting.
>
> But please note that v3.81 is still 7 years old.  Why don't you use
> recent code (v3.82, wich actually is already 2.5 yeards old as well)?

Sorry, I have a typo mistake actually I have upgraded to 3.82 only..
there build works fine..

Thanks,
Jagan.

>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Voodoo Programming: Things programmers do that  they  know  shouldn't
> work  but they try anyway, and which sometimes actually work, such as
> recompiling everything.                             - Karl Lehenbauer