* [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files
@ 2013-01-28 23:32 Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files Tom Warren
` (6 more replies)
0 siblings, 7 replies; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
Common Tegra files are in arch-tegra, shared between T20/T30/T114.
Tegra114-specific headers are in arch-tegra114. Note that some of
these will be filled in as more T114 support is added (drivers,
WB/LP0 support, etc.).
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
- put OSC_FREQ defines in SoC-specific headers
- use correct BIT/BCT offsets for T114 ODMDATA
- use T30 gpio header for T114
Changes in v3:
- Add MAX_NUM_CPU for common clock code use.
arch/arm/include/asm/arch-tegra/clk_rst.h | 56 ++-
arch/arm/include/asm/arch-tegra/gp_padctrl.h | 1 +
arch/arm/include/asm/arch-tegra/pmc.h | 8 +
arch/arm/include/asm/arch-tegra/tegra.h | 2 +
arch/arm/include/asm/arch-tegra114/clock-tables.h | 402 +++++++++++++
arch/arm/include/asm/arch-tegra114/clock.h | 28 +
arch/arm/include/asm/arch-tegra114/flow.h | 35 ++
arch/arm/include/asm/arch-tegra114/funcmux.h | 31 +
arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 59 ++
arch/arm/include/asm/arch-tegra114/gpio.h | 30 +
arch/arm/include/asm/arch-tegra114/hardware.h | 22 +
arch/arm/include/asm/arch-tegra114/pinmux.h | 618 +++++++++++++++++++++
arch/arm/include/asm/arch-tegra114/pmu.h | 23 +
arch/arm/include/asm/arch-tegra114/spl.h | 22 +
arch/arm/include/asm/arch-tegra114/tegra.h | 33 ++
15 files changed, 1365 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/include/asm/arch-tegra114/clock-tables.h
create mode 100644 arch/arm/include/asm/arch-tegra114/clock.h
create mode 100644 arch/arm/include/asm/arch-tegra114/flow.h
create mode 100644 arch/arm/include/asm/arch-tegra114/funcmux.h
create mode 100644 arch/arm/include/asm/arch-tegra114/gp_padctrl.h
create mode 100644 arch/arm/include/asm/arch-tegra114/gpio.h
create mode 100644 arch/arm/include/asm/arch-tegra114/hardware.h
create mode 100644 arch/arm/include/asm/arch-tegra114/pinmux.h
create mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h
create mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
create mode 100644 arch/arm/include/asm/arch-tegra114/tegra.h
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index b64aa7d..c754ec7 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -121,16 +121,43 @@ struct clk_rst_ctlr {
uint crc_clk_cpug_cmplx; /* _CLK_CPUG_CMPLX_0, 0x378 */
uint crc_clk_cpulp_cmplx; /* _CLK_CPULP_CMPLX_0, 0x37C */
uint crc_cpu_softrst_ctrl; /* _CPU_SOFTRST_CTRL_0, 0x380 */
- uint crc_reserved33[11]; /* _reserved_33, 0x384-3ac */
+ uint crc_cpu_softrst_ctrl1; /* _CPU_SOFTRST_CTR1L_0, 0x384 */
+ uint crc_cpu_softrst_ctrl2; /* _CPU_SOFTRST_CTRL2_0, 0x388 */
+ uint crc_reserved33[9]; /* _reserved_33, 0x38c-3ac */
uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW]; /* _G3D2_0..., 0x3b0-0x42c */
/* _RST_DEV_V/W_SET_0 0x430 ~ 0x43c */
struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW];
/* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */
struct clk_set_clr crc_clk_enb_ex_vw[TEGRA_CLK_REGS_VW];
- uint crc_reserved40[12]; /* _reserved_40, 0x450-47C */
- uint crc_pll_cfg0; /* _PLL_CFG0_0, 0x480 */
- uint crc_pll_cfg1; /* _PLL_CFG1_0, 0x484 */
- uint crc_pll_cfg2; /* _PLL_CFG2_0, 0x488 */
+ /* Additional (T114) registers */
+ uint crc_rst_cpug_cmplx_set; /* _RST_CPUG_CMPLX_SET_0, 0x450 */
+ uint crc_rst_cpug_cmplx_clr; /* _RST_CPUG_CMPLX_CLR_0, 0x454 */
+ uint crc_rst_cpulp_cmplx_set; /* _RST_CPULP_CMPLX_SET_0, 0x458 */
+ uint crc_rst_cpulp_cmplx_clr; /* _RST_CPULP_CMPLX_CLR_0, 0x45C */
+ uint crc_clk_cpug_cmplx_set; /* _CLK_CPUG_CMPLX_SET_0, 0x460 */
+ uint crc_clk_cpug_cmplx_clr; /* _CLK_CPUG_CMPLX_CLR_0, 0x464 */
+ uint crc_clk_cpulp_cmplx_set; /* _CLK_CPULP_CMPLX_SET_0, 0x468 */
+ uint crc_clk_cpulp_cmplx_clr; /* _CLK_CPULP_CMPLX_CLR_0, 0x46C */
+ uint crc_cpu_cmplx_status; /* _CPU_CMPLX_STATUS_0, 0x470 */
+ uint crc_reserved40[1]; /* _reserved_40, 0x474 */
+ uint crc_intstatus; /* __INTSTATUS_0, 0x478 */
+ uint crc_intmask; /* __INTMASK_0, 0x47C */
+ uint crc_utmip_pll_cfg0; /* _UTMIP_PLL_CFG0_0, 0x480 */
+ uint crc_utmip_pll_cfg1; /* _UTMIP_PLL_CFG1_0, 0x484 */
+ uint crc_utmip_pll_cfg2; /* _UTMIP_PLL_CFG2_0, 0x488 */
+
+ uint crc_plle_aux; /* _PLLE_AUX_0, 0x48C */
+ uint crc_sata_pll_cfg0; /* _SATA_PLL_CFG0_0, 0x490 */
+ uint crc_sata_pll_cfg1; /* _SATA_PLL_CFG1_0, 0x494 */
+ uint crc_pcie_pll_cfg0; /* _PCIE_PLL_CFG0_0, 0x498 */
+
+ uint crc_prog_audio_dly_clk; /* _PROG_AUDIO_DLY_CLK_0, 0x49C */
+ uint crc_audio_sync_clk_i2s0; /* _AUDIO_SYNC_CLK_I2S0_0, 0x4A0 */
+ uint crc_audio_sync_clk_i2s1; /* _AUDIO_SYNC_CLK_I2S1_0, 0x4A4 */
+ uint crc_audio_sync_clk_i2s2; /* _AUDIO_SYNC_CLK_I2S2_0, 0x4A8 */
+ uint crc_audio_sync_clk_i2s3; /* _AUDIO_SYNC_CLK_I2S3_0, 0x4AC */
+ uint crc_audio_sync_clk_i2s4; /* _AUDIO_SYNC_CLK_I2S4_0, 0x4B0 */
+ uint crc_audio_sync_clk_spdif; /* _AUDIO_SYNC_CLK_SPDIF_0, 0x4B4 */
};
/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
@@ -279,4 +306,23 @@ enum {
#define CLK_SYS_RATE_APB_RATE_SHIFT 0
#define CLK_SYS_RATE_APB_RATE_MASK (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
+/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR */
+#define CLR_CPURESET0 (1 << 0)
+#define CLR_CPURESET1 (1 << 1)
+#define CLR_CPURESET2 (1 << 2)
+#define CLR_CPURESET3 (1 << 3)
+#define CLR_DBGRESET0 (1 << 12)
+#define CLR_DBGRESET1 (1 << 13)
+#define CLR_DBGRESET2 (1 << 14)
+#define CLR_DBGRESET3 (1 << 15)
+#define CLR_CORERESET0 (1 << 16)
+#define CLR_CORERESET1 (1 << 17)
+#define CLR_CORERESET2 (1 << 18)
+#define CLR_CORERESET3 (1 << 19)
+#define CLR_CXRESET0 (1 << 20)
+#define CLR_CXRESET1 (1 << 21)
+#define CLR_CXRESET2 (1 << 22)
+#define CLR_CXRESET3 (1 << 23)
+#define CLR_NONCPURESET (1 << 29)
+
#endif /* _TEGRA_CLK_RST_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
index e6085a0..209abf1 100644
--- a/arch/arm/include/asm/arch-tegra/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
@@ -35,5 +35,6 @@
/* CHIPID field returned from APB_MISC_GP_HIDREV register */
#define CHIPID_TEGRA20 0x20
#define CHIPID_TEGRA30 0x30
+#define CHIPID_TEGRA114 0x35
#endif /* _TEGRA_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h
index b1d47cd..1bcdcf8 100644
--- a/arch/arm/include/asm/arch-tegra/pmc.h
+++ b/arch/arm/include/asm/arch-tegra/pmc.h
@@ -128,5 +128,13 @@ struct pmc_ctlr {
#define START_CP (1 << 8)
#define CPUPWRREQ_OE (1 << 16)
+#define CPUPWRREQ_POL (1 << 15)
+
+#define CRAILID (0)
+#define CE0ID (14)
+#define C0NCID (15)
+#define CRAIL (1 << CRAILID)
+#define CE0 (1 << CE0ID)
+#define C0NC (1 << C0NCID)
#endif /* PMC_H */
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index 013a3c5..f97cfd0 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -73,6 +73,7 @@ enum {
SKU_ID_AP25E = 0x1b,
SKU_ID_T25E = 0x1c,
SKU_ID_T30 = 0x81, /* Cardhu value */
+ SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */
};
/*
@@ -85,6 +86,7 @@ enum {
TEGRA_SOC_T20,
TEGRA_SOC_T25,
TEGRA_SOC_T30,
+ TEGRA_SOC_T114,
TEGRA_SOC_CNT,
TEGRA_SOC_UNKNOWN = -1,
diff --git a/arch/arm/include/asm/arch-tegra114/clock-tables.h b/arch/arm/include/asm/arch-tegra114/clock-tables.h
new file mode 100644
index 0000000..d8fa0e1
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/clock-tables.h
@@ -0,0 +1,402 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 clock PLL tables */
+
+#ifndef _TEGRA114_CLOCK_TABLES_H_
+#define _TEGRA114_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+ CLOCK_ID_FIRST,
+ CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+ CLOCK_ID_MEMORY,
+ CLOCK_ID_PERIPH,
+ CLOCK_ID_AUDIO,
+ CLOCK_ID_USB,
+ CLOCK_ID_DISPLAY,
+
+ /* now the simple ones */
+ CLOCK_ID_FIRST_SIMPLE,
+ CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+ CLOCK_ID_EPCI,
+ CLOCK_ID_SFROM32KHZ,
+
+ /* These are the base clocks (inputs to the Tegra SOC) */
+ CLOCK_ID_32KHZ,
+ CLOCK_ID_OSC,
+
+ CLOCK_ID_COUNT, /* number of PLLs */
+ CLOCK_ID_DISPLAY2, /* placeholder */
+ CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+ PERIPH_ID_FIRST,
+
+ /* Low word: 31:0 (DEVICES_L) */
+ PERIPH_ID_CPU = PERIPH_ID_FIRST,
+ PERIPH_ID_COP,
+ PERIPH_ID_TRIGSYS,
+ PERIPH_ID_RESERVED3,
+ PERIPH_ID_RTC,
+ PERIPH_ID_TMR,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+
+ /* 8 */
+ PERIPH_ID_GPIO,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SPDIF,
+ PERIPH_ID_I2S1,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_NDFLASH,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC4,
+
+ /* 16 */
+ PERIPH_ID_RESERVED16,
+ PERIPH_ID_PWM,
+ PERIPH_ID_I2S2,
+ PERIPH_ID_EPP,
+ PERIPH_ID_VI,
+ PERIPH_ID_2D,
+ PERIPH_ID_USBD,
+ PERIPH_ID_ISP,
+
+ /* 24 */
+ PERIPH_ID_3D,
+ PERIPH_ID_RESERVED24,
+ PERIPH_ID_DISP2,
+ PERIPH_ID_DISP1,
+ PERIPH_ID_HOST1X,
+ PERIPH_ID_VCP,
+ PERIPH_ID_I2S0,
+ PERIPH_ID_CACHE2,
+
+ /* Middle word: 63:32 (DEVICES_H) */
+ PERIPH_ID_MEM,
+ PERIPH_ID_AHBDMA,
+ PERIPH_ID_APBDMA,
+ PERIPH_ID_RESERVED35,
+ PERIPH_ID_KBC,
+ PERIPH_ID_STAT_MON,
+ PERIPH_ID_PMC,
+ PERIPH_ID_FUSE,
+
+ /* 40 */
+ PERIPH_ID_KFUSE,
+ PERIPH_ID_SBC1,
+ PERIPH_ID_SNOR,
+ PERIPH_ID_RESERVED43,
+ PERIPH_ID_SBC2,
+ PERIPH_ID_RESERVED45,
+ PERIPH_ID_SBC3,
+ PERIPH_ID_I2C5,
+
+ /* 48 */
+ PERIPH_ID_DSI,
+ PERIPH_ID_TVO,
+ PERIPH_ID_MIPI,
+ PERIPH_ID_HDMI,
+ PERIPH_ID_CSI,
+ PERIPH_ID_TVDAC,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_UART3,
+
+ /* 56 */
+ PERIPH_ID_RESERVED56,
+ PERIPH_ID_EMC,
+ PERIPH_ID_USB2,
+ PERIPH_ID_USB3,
+ PERIPH_ID_MPE,
+ PERIPH_ID_VDE,
+ PERIPH_ID_BSEA,
+ PERIPH_ID_BSEV,
+
+ /* Upper word 95:64 (DEVICES_U) */
+ PERIPH_ID_SPEEDO,
+ PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_SBC4,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_PCIE,
+ PERIPH_ID_OWR,
+
+ /* 72 */
+ PERIPH_ID_AFI,
+ PERIPH_ID_CORESIGHT,
+ PERIPH_ID_PCIEXCLK,
+ PERIPH_ID_AVPUCQ,
+ PERIPH_ID_RESERVED76,
+ PERIPH_ID_RESERVED77,
+ PERIPH_ID_RESERVED78,
+ PERIPH_ID_DTV,
+
+ /* 80 */
+ PERIPH_ID_NANDSPEED,
+ PERIPH_ID_I2CSLOW,
+ PERIPH_ID_DSIB,
+ PERIPH_ID_RESERVED83,
+ PERIPH_ID_IRAMA,
+ PERIPH_ID_IRAMB,
+ PERIPH_ID_IRAMC,
+ PERIPH_ID_IRAMD,
+
+ /* 88 */
+ PERIPH_ID_CRAM2,
+ PERIPH_ID_RESERVED89,
+ PERIPH_ID_MDOUBLER,
+ PERIPH_ID_RESERVED91,
+ PERIPH_ID_SUSOUT,
+ PERIPH_ID_RESERVED93,
+ PERIPH_ID_RESERVED94,
+ PERIPH_ID_RESERVED95,
+
+ PERIPH_ID_VW_FIRST,
+ /* V word: 31:0 */
+ PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+ PERIPH_ID_CPULP,
+ PERIPH_ID_3D2,
+ PERIPH_ID_MSELECT,
+ PERIPH_ID_TSENSOR,
+ PERIPH_ID_I2S3,
+ PERIPH_ID_I2S4,
+ PERIPH_ID_I2C4,
+
+ /* 104 */
+ PERIPH_ID_SBC5,
+ PERIPH_ID_SBC6,
+ PERIPH_ID_AUDIO,
+ PERIPH_ID_APBIF,
+ PERIPH_ID_DAM0,
+ PERIPH_ID_DAM1,
+ PERIPH_ID_DAM2,
+ PERIPH_ID_HDA2CODEC2X,
+
+ /* 112 */
+ PERIPH_ID_ATOMICS,
+ PERIPH_ID_EX_RESERVED17,
+ PERIPH_ID_EX_RESERVED18,
+ PERIPH_ID_EX_RESERVED19,
+ PERIPH_ID_EX_RESERVED20,
+ PERIPH_ID_EX_RESERVED21,
+ PERIPH_ID_EX_RESERVED22,
+ PERIPH_ID_ACTMON,
+
+ /* 120 */
+ PERIPH_ID_EX_RESERVED24,
+ PERIPH_ID_EX_RESERVED25,
+ PERIPH_ID_EX_RESERVED26,
+ PERIPH_ID_EX_RESERVED27,
+ PERIPH_ID_SATA,
+ PERIPH_ID_HDA,
+ PERIPH_ID_EX_RESERVED30,
+ PERIPH_ID_EX_RESERVED31,
+
+ /* W word: 31:0 */
+ PERIPH_ID_HDA2HDMICODEC,
+ PERIPH_ID_RESERVED1_SATACOLD,
+ PERIPH_ID_RESERVED2_PCIERX0,
+ PERIPH_ID_RESERVED3_PCIERX1,
+ PERIPH_ID_RESERVED4_PCIERX2,
+ PERIPH_ID_RESERVED5_PCIERX3,
+ PERIPH_ID_RESERVED6_PCIERX4,
+ PERIPH_ID_RESERVED7_PCIERX5,
+
+ /* 136 */
+ PERIPH_ID_CEC,
+ PERIPH_ID_PCIE2_IOBIST,
+ PERIPH_ID_EMC_IOBIST,
+ PERIPH_ID_HDMI_IOBIST,
+ PERIPH_ID_SATA_IOBIST,
+ PERIPH_ID_MIPI_IOBIST,
+ PERIPH_ID_EMC1_IOBIST,
+ PERIPH_ID_XUSB,
+
+ /* 144 */
+ PERIPH_ID_CILAB,
+ PERIPH_ID_CILCD,
+ PERIPH_ID_CILE,
+ PERIPH_ID_DSIA_LP,
+ PERIPH_ID_DSIB_LP,
+ PERIPH_ID_RESERVED21_ENTROPY,
+ PERIPH_ID_RESERVED22_W,
+ PERIPH_ID_RESERVED23_W,
+
+ /* 152 */
+ PERIPH_ID_RESERVED24_W,
+ PERIPH_ID_AMX0,
+ PERIPH_ID_ADX0,
+ PERIPH_ID_DVFS,
+ PERIPH_ID_XUSB_SS,
+ PERIPH_ID_EMC_DLL,
+ PERIPH_ID_MC1,
+ PERIPH_ID_EMC1,
+
+ PERIPH_ID_COUNT,
+ PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+ PLL_OUT1,
+ PLL_OUT2,
+ PLL_OUT3,
+ PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+ /* 0x00 */
+ PERIPHC_I2S1,
+ PERIPHC_I2S2,
+ PERIPHC_SPDIF_OUT,
+ PERIPHC_SPDIF_IN,
+ PERIPHC_PWM,
+ PERIPHC_05h,
+ PERIPHC_SBC2,
+ PERIPHC_SBC3,
+
+ /* 0x08 */
+ PERIPHC_08h,
+ PERIPHC_I2C1,
+ PERIPHC_I2C5,
+ PERIPHC_0bh,
+ PERIPHC_0ch,
+ PERIPHC_SBC1,
+ PERIPHC_DISP1,
+ PERIPHC_DISP2,
+
+ /* 0x10 */
+ PERIPHC_CVE,
+ PERIPHC_11h,
+ PERIPHC_VI,
+ PERIPHC_13h,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC2,
+ PERIPHC_G3D,
+ PERIPHC_G2D,
+
+ /* 0x18 */
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC4,
+ PERIPHC_VFIR,
+ PERIPHC_EPP,
+ PERIPHC_MPE,
+ PERIPHC_MIPI,
+ PERIPHC_UART1,
+ PERIPHC_UART2,
+
+ /* 0x20 */
+ PERIPHC_HOST1X,
+ PERIPHC_21h,
+ PERIPHC_TVO,
+ PERIPHC_HDMI,
+ PERIPHC_24h,
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_EMC,
+
+ /* 0x28 */
+ PERIPHC_UART3,
+ PERIPHC_29h,
+ PERIPHC_VI_SENSOR,
+ PERIPHC_2bh,
+ PERIPHC_2ch,
+ PERIPHC_SBC4,
+ PERIPHC_I2C3,
+ PERIPHC_SDMMC3,
+
+ /* 0x30 */
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_VDE,
+ PERIPHC_OWR,
+ PERIPHC_NOR,
+ PERIPHC_CSITE,
+ PERIPHC_I2S0,
+ PERIPHC_37h,
+
+ PERIPHC_VW_FIRST,
+ /* 0x38 */
+ PERIPHC_G3D2 = PERIPHC_VW_FIRST,
+ PERIPHC_MSELECT,
+ PERIPHC_TSENSOR,
+ PERIPHC_I2S3,
+ PERIPHC_I2S4,
+ PERIPHC_I2C4,
+ PERIPHC_SBC5,
+ PERIPHC_SBC6,
+
+ /* 0x40 */
+ PERIPHC_AUDIO,
+ PERIPHC_41h,
+ PERIPHC_DAM0,
+ PERIPHC_DAM1,
+ PERIPHC_DAM2,
+ PERIPHC_HDA2CODEC2X,
+ PERIPHC_ACTMON,
+ PERIPHC_EXTPERIPH1,
+
+ /* 0x48 */
+ PERIPHC_EXTPERIPH2,
+ PERIPHC_EXTPERIPH3,
+ PERIPHC_NANDSPEED,
+ PERIPHC_I2CSLOW,
+ PERIPHC_SYS,
+ PERIPHC_SPEEDO,
+ PERIPHC_4eh,
+ PERIPHC_4fh,
+
+ /* 0x50 */
+ PERIPHC_50h,
+ PERIPHC_51h,
+ PERIPHC_52h,
+ PERIPHC_53h,
+ PERIPHC_SATAOOB,
+ PERIPHC_SATA,
+ PERIPHC_HDA,
+
+ PERIPHC_COUNT,
+
+ PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+ (id < PERIPH_ID_VW_FIRST) ? \
+ ((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+ (id) < PERIPH_ID_COUNT)
+
+#endif /* _TEGRA114_CLOCK_TABLES_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/clock.h b/arch/arm/include/asm/arch-tegra114/clock.h
new file mode 100644
index 0000000..abbefcd
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/clock.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 clock control functions */
+
+#ifndef _TEGRA114_CLOCK_H_
+#define _TEGRA114_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT 28
+#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT)
+
+#endif /* _TEGRA114_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/flow.h b/arch/arm/include/asm/arch-tegra114/flow.h
new file mode 100644
index 0000000..c7eb051
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/flow.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_FLOW_H_
+#define _TEGRA114_FLOW_H_
+
+struct flow_ctlr {
+ u32 halt_cpu_events;
+ u32 halt_cop_events;
+ u32 cpu_csr;
+ u32 cop_csr;
+ u32 xrq_events;
+ u32 halt_cpu1_events;
+ u32 cpu1_csr;
+ u32 halt_cpu2_events;
+ u32 cpu2_csr;
+ u32 halt_cpu3_events;
+ u32 cpu3_csr;
+ u32 cluster_control;
+};
+
+#endif /* _TEGRA114_FLOW_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/funcmux.h b/arch/arm/include/asm/arch-tegra114/funcmux.h
new file mode 100644
index 0000000..7f48f25
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/funcmux.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#ifndef _TEGRA114_FUNCMUX_H_
+#define _TEGRA114_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+ FUNCMUX_DEFAULT = 0, /* default config */
+
+ /* UART configs */
+ FUNCMUX_UART4_GMI = 0,
+};
+#endif /* _TEGRA114_FUNCMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
new file mode 100644
index 0000000..c538bdd
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_GP_PADCTRL_H_
+#define _TEGRA114_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+ u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */
+ u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */
+ u32 reserved0[22]; /* 0x08 - 0x5C: */
+ u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */
+ u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+ u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+ u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+ u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+ u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+ u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+ u32 atcfg4; /* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+ u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+ u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+ u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+ u32 csuscfg; /* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */
+ u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+ u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+ u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+ u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+ u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+ u32 lcdcfg1; /* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */
+ u32 lcdcfg2; /* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */
+ u32 sdio2cfg; /* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */
+ u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+ u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+ u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+ u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+ u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+ u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+ u32 vicfg1; /* 0xC8: APB_MISC_GP_VICFG1PADCTRL */
+ u32 vivttgen; /* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */
+ u32 reserved1[7]; /* 0xD0-0xE8: */
+ u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+};
+
+#endif /* _TEGRA114_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gpio.h b/arch/arm/include/asm/arch-tegra114/gpio.h
new file mode 100644
index 0000000..21853b6
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/gpio.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_GPIO_H_
+#define _TEGRA114_GPIO_H_
+
+/*
+ * The Tegra114 GPIO controller has 246 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */
+#define TEGRA_GPIO_BANKS 8 /* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+#include <asm/arch-tegra30/gpio.h>
+
+#endif /* _TEGRA114_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/hardware.h b/arch/arm/include/asm/arch-tegra114/hardware.h
new file mode 100644
index 0000000..c21fbb6
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_HARDWARE_H_
+#define _TEGRA114_HARDWARE_H_
+
+/* include tegra specific hardware definitions */
+
+#endif /* _TEGRA114_HARDWARE_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
new file mode 100644
index 0000000..fd22930
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -0,0 +1,618 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_PINMUX_H_
+#define _TEGRA114_PINMUX_H_
+
+/*
+ * Pin groups which we adjust. There are three basic attributes of each pin
+ * group which use this enum:
+ *
+ * - function
+ * - pullup / pulldown
+ * - tristate or normal
+ */
+enum pmux_pingrp {
+ PINGRP_ULPI_DATA0 = 0, /* offset 0x3000 */
+ PINGRP_ULPI_DATA1,
+ PINGRP_ULPI_DATA2,
+ PINGRP_ULPI_DATA3,
+ PINGRP_ULPI_DATA4,
+ PINGRP_ULPI_DATA5,
+ PINGRP_ULPI_DATA6,
+ PINGRP_ULPI_DATA7,
+ PINGRP_ULPI_CLK,
+ PINGRP_ULPI_DIR,
+ PINGRP_ULPI_NXT,
+ PINGRP_ULPI_STP,
+ PINGRP_DAP3_FS,
+ PINGRP_DAP3_DIN,
+ PINGRP_DAP3_DOUT,
+ PINGRP_DAP3_SCLK,
+ PINGRP_GPIO_PV0,
+ PINGRP_GPIO_PV1,
+ PINGRP_SDMMC1_CLK,
+ PINGRP_SDMMC1_CMD,
+ PINGRP_SDMMC1_DAT3,
+ PINGRP_SDMMC1_DAT2,
+ PINGRP_SDMMC1_DAT1,
+ PINGRP_SDMMC1_DAT0,
+ PINGRP_GPIO_PV2,
+ PINGRP_GPIO_PV3,
+ PINGRP_CLK2_OUT,
+ PINGRP_CLK2_REQ,
+ PINGRP_LCD_PWR1,
+ PINGRP_LCD_PWR2,
+ PINGRP_LCD_SDIN,
+ PINGRP_LCD_SDOUT,
+ PINGRP_LCD_WR_N,
+ PINGRP_LCD_CS0_N,
+ PINGRP_LCD_DC0,
+ PINGRP_LCD_SCK,
+ PINGRP_LCD_PWR0,
+ PINGRP_LCD_PCLK,
+ PINGRP_LCD_DE,
+ PINGRP_LCD_HSYNC,
+ PINGRP_LCD_VSYNC,
+ PINGRP_LCD_D0,
+ PINGRP_LCD_D1,
+ PINGRP_LCD_D2,
+ PINGRP_LCD_D3,
+ PINGRP_LCD_D4,
+ PINGRP_LCD_D5,
+ PINGRP_LCD_D6,
+ PINGRP_LCD_D7,
+ PINGRP_LCD_D8,
+ PINGRP_LCD_D9,
+ PINGRP_LCD_D10,
+ PINGRP_LCD_D11,
+ PINGRP_LCD_D12,
+ PINGRP_LCD_D13,
+ PINGRP_LCD_D14,
+ PINGRP_LCD_D15,
+ PINGRP_LCD_D16,
+ PINGRP_LCD_D17,
+ PINGRP_LCD_D18,
+ PINGRP_LCD_D19,
+ PINGRP_LCD_D20,
+ PINGRP_LCD_D21,
+ PINGRP_LCD_D22,
+ PINGRP_LCD_D23,
+ PINGRP_LCD_CS1_N,
+ PINGRP_LCD_M1,
+ PINGRP_LCD_DC1,
+ PINGRP_HDMI_INT,
+ PINGRP_DDC_SCL,
+ PINGRP_DDC_SDA,
+ PINGRP_CRT_HSYNC,
+ PINGRP_CRT_VSYNC,
+ PINGRP_VI_D0,
+ PINGRP_VI_D1,
+ PINGRP_VI_D2,
+ PINGRP_VI_D3,
+ PINGRP_VI_D4,
+ PINGRP_VI_D5,
+ PINGRP_VI_D6,
+ PINGRP_VI_D7,
+ PINGRP_VI_D8,
+ PINGRP_VI_D9,
+ PINGRP_VI_D10,
+ PINGRP_VI_D11,
+ PINGRP_VI_PCLK,
+ PINGRP_VI_MCLK,
+ PINGRP_VI_VSYNC,
+ PINGRP_VI_HSYNC,
+ PINGRP_UART2_RXD,
+ PINGRP_UART2_TXD,
+ PINGRP_UART2_RTS_N,
+ PINGRP_UART2_CTS_N,
+ PINGRP_UART3_TXD,
+ PINGRP_UART3_RXD,
+ PINGRP_UART3_CTS_N,
+ PINGRP_UART3_RTS_N,
+ PINGRP_GPIO_PU0,
+ PINGRP_GPIO_PU1,
+ PINGRP_GPIO_PU2,
+ PINGRP_GPIO_PU3,
+ PINGRP_GPIO_PU4,
+ PINGRP_GPIO_PU5,
+ PINGRP_GPIO_PU6,
+ PINGRP_GEN1_I2C_SDA,
+ PINGRP_GEN1_I2C_SCL,
+ PINGRP_DAP4_FS,
+ PINGRP_DAP4_DIN,
+ PINGRP_DAP4_DOUT,
+ PINGRP_DAP4_SCLK,
+ PINGRP_CLK3_OUT,
+ PINGRP_CLK3_REQ,
+ PINGRP_GMI_WP_N,
+ PINGRP_GMI_IORDY,
+ PINGRP_GMI_WAIT,
+ PINGRP_GMI_ADV_N,
+ PINGRP_GMI_CLK,
+ PINGRP_GMI_CS0_N,
+ PINGRP_GMI_CS1_N,
+ PINGRP_GMI_CS2_N,
+ PINGRP_GMI_CS3_N,
+ PINGRP_GMI_CS4_N,
+ PINGRP_GMI_CS6_N,
+ PINGRP_GMI_CS7_N,
+ PINGRP_GMI_AD0,
+ PINGRP_GMI_AD1,
+ PINGRP_GMI_AD2,
+ PINGRP_GMI_AD3,
+ PINGRP_GMI_AD4,
+ PINGRP_GMI_AD5,
+ PINGRP_GMI_AD6,
+ PINGRP_GMI_AD7,
+ PINGRP_GMI_AD8,
+ PINGRP_GMI_AD9,
+ PINGRP_GMI_AD10,
+ PINGRP_GMI_AD11,
+ PINGRP_GMI_AD12,
+ PINGRP_GMI_AD13,
+ PINGRP_GMI_AD14,
+ PINGRP_GMI_AD15,
+ PINGRP_GMI_A16,
+ PINGRP_GMI_A17,
+ PINGRP_GMI_A18,
+ PINGRP_GMI_A19,
+ PINGRP_GMI_WR_N,
+ PINGRP_GMI_OE_N,
+ PINGRP_GMI_DQS,
+ PINGRP_GMI_RST_N,
+ PINGRP_GEN2_I2C_SCL,
+ PINGRP_GEN2_I2C_SDA,
+ PINGRP_SDMMC4_CLK,
+ PINGRP_SDMMC4_CMD,
+ PINGRP_SDMMC4_DAT0,
+ PINGRP_SDMMC4_DAT1,
+ PINGRP_SDMMC4_DAT2,
+ PINGRP_SDMMC4_DAT3,
+ PINGRP_SDMMC4_DAT4,
+ PINGRP_SDMMC4_DAT5,
+ PINGRP_SDMMC4_DAT6,
+ PINGRP_SDMMC4_DAT7,
+ PINGRP_SDMMC4_RST_N,
+ PINGRP_CAM_MCLK,
+ PINGRP_GPIO_PCC1,
+ PINGRP_GPIO_PBB0,
+ PINGRP_CAM_I2C_SCL,
+ PINGRP_CAM_I2C_SDA,
+ PINGRP_GPIO_PBB3,
+ PINGRP_GPIO_PBB4,
+ PINGRP_GPIO_PBB5,
+ PINGRP_GPIO_PBB6,
+ PINGRP_GPIO_PBB7,
+ PINGRP_GPIO_PCC2,
+ PINGRP_JTAG_RTCK,
+ PINGRP_PWR_I2C_SCL,
+ PINGRP_PWR_I2C_SDA,
+ PINGRP_KB_ROW0,
+ PINGRP_KB_ROW1,
+ PINGRP_KB_ROW2,
+ PINGRP_KB_ROW3,
+ PINGRP_KB_ROW4,
+ PINGRP_KB_ROW5,
+ PINGRP_KB_ROW6,
+ PINGRP_KB_ROW7,
+ PINGRP_KB_ROW8,
+ PINGRP_KB_ROW9,
+ PINGRP_KB_ROW10,
+ PINGRP_KB_ROW11,
+ PINGRP_KB_ROW12,
+ PINGRP_KB_ROW13,
+ PINGRP_KB_ROW14,
+ PINGRP_KB_ROW15,
+ PINGRP_KB_COL0,
+ PINGRP_KB_COL1,
+ PINGRP_KB_COL2,
+ PINGRP_KB_COL3,
+ PINGRP_KB_COL4,
+ PINGRP_KB_COL5,
+ PINGRP_KB_COL6,
+ PINGRP_KB_COL7,
+ PINGRP_CLK_32K_OUT,
+ PINGRP_SYS_CLK_REQ,
+ PINGRP_CORE_PWR_REQ,
+ PINGRP_CPU_PWR_REQ,
+ PINGRP_PWR_INT_N,
+ PINGRP_CLK_32K_IN,
+ PINGRP_OWR,
+ PINGRP_DAP1_FS,
+ PINGRP_DAP1_DIN,
+ PINGRP_DAP1_DOUT,
+ PINGRP_DAP1_SCLK,
+ PINGRP_CLK1_REQ,
+ PINGRP_CLK1_OUT,
+ PINGRP_SPDIF_IN,
+ PINGRP_SPDIF_OUT,
+ PINGRP_DAP2_FS,
+ PINGRP_DAP2_DIN,
+ PINGRP_DAP2_DOUT,
+ PINGRP_DAP2_SCLK,
+ PINGRP_SPI2_MOSI,
+ PINGRP_SPI2_MISO,
+ PINGRP_SPI2_CS0_N,
+ PINGRP_SPI2_SCK,
+ PINGRP_SPI1_MOSI,
+ PINGRP_SPI1_SCK,
+ PINGRP_SPI1_CS0_N,
+ PINGRP_SPI1_MISO,
+ PINGRP_SPI2_CS1_N,
+ PINGRP_SPI2_CS2_N,
+ PINGRP_SDMMC3_CLK,
+ PINGRP_SDMMC3_CMD,
+ PINGRP_SDMMC3_DAT0,
+ PINGRP_SDMMC3_DAT1,
+ PINGRP_SDMMC3_DAT2,
+ PINGRP_SDMMC3_DAT3,
+ PINGRP_SDMMC3_DAT4,
+ PINGRP_SDMMC3_DAT5,
+ PINGRP_SDMMC3_DAT6,
+ PINGRP_SDMMC3_DAT7,
+ PINGRP_PEX_L0_PRSNT_N,
+ PINGRP_PEX_L0_RST_N,
+ PINGRP_PEX_L0_CLKREQ_N,
+ PINGRP_PEX_WAKE_N,
+ PINGRP_PEX_L1_PRSNT_N,
+ PINGRP_PEX_L1_RST_N,
+ PINGRP_PEX_L1_CLKREQ_N,
+ PINGRP_PEX_L2_PRSNT_N,
+ PINGRP_PEX_L2_RST_N,
+ PINGRP_PEX_L2_CLKREQ_N,
+ PINGRP_HDMI_CEC, /* offset 0x33e0 */
+ PINGRP_SDMMC1_WP_N,
+ PINGRP_SDMMC3_CD_N,
+ PINGRP_SPI1_CS1_N,
+ PINGRP_SPI1_CS2_N,
+ PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */
+ PINGRP_USB_VBUS_EN1,
+ PINGRP_SDMMC3_CLK_LB_IN,
+ PINGRP_SDMMC3_CLK_LB_OUT,
+ PINGRP_NAND_GMI_CLK_LB,
+ PINGRP_RESET_OUT_N,
+ PINGRP_COUNT,
+};
+
+enum pdrive_pingrp {
+ PDRIVE_PINGROUP_AO1 = 0, /* offset 0x868 */
+ PDRIVE_PINGROUP_AO2,
+ PDRIVE_PINGROUP_AT1,
+ PDRIVE_PINGROUP_AT2,
+ PDRIVE_PINGROUP_AT3,
+ PDRIVE_PINGROUP_AT4,
+ PDRIVE_PINGROUP_AT5,
+ PDRIVE_PINGROUP_CDEV1,
+ PDRIVE_PINGROUP_CDEV2,
+ PDRIVE_PINGROUP_CSUS,
+ PDRIVE_PINGROUP_DAP1,
+ PDRIVE_PINGROUP_DAP2,
+ PDRIVE_PINGROUP_DAP3,
+ PDRIVE_PINGROUP_DAP4,
+ PDRIVE_PINGROUP_DBG,
+ PDRIVE_PINGROUP_LCD1,
+ PDRIVE_PINGROUP_LCD2,
+ PDRIVE_PINGROUP_SDIO2,
+ PDRIVE_PINGROUP_SDIO3,
+ PDRIVE_PINGROUP_SPI,
+ PDRIVE_PINGROUP_UAA,
+ PDRIVE_PINGROUP_UAB,
+ PDRIVE_PINGROUP_UART2,
+ PDRIVE_PINGROUP_UART3,
+ PDRIVE_PINGROUP_VI1 = 24, /* offset 0x8c8 */
+ PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8ec */
+ PDRIVE_PINGROUP_CRT = 36, /* offset 0x8f8 */
+ PDRIVE_PINGROUP_DDC,
+ PDRIVE_PINGROUP_GMA,
+ PDRIVE_PINGROUP_GMB,
+ PDRIVE_PINGROUP_GMC,
+ PDRIVE_PINGROUP_GMD,
+ PDRIVE_PINGROUP_GME,
+ PDRIVE_PINGROUP_GMF,
+ PDRIVE_PINGROUP_GMG,
+ PDRIVE_PINGROUP_GMH,
+ PDRIVE_PINGROUP_OWR,
+ PDRIVE_PINGROUP_UAD,
+ PDRIVE_PINGROUP_GPV,
+ PDRIVE_PINGROUP_DEV3 = 49, /* offset 0x92c */
+ PDRIVE_PINGROUP_CEC = 52, /* offset 0x938 */
+ PDRIVE_PINGROUP_AT6,
+ PDRIVE_PINGROUP_DAP5,
+ PDRIVE_PINGROUP_VBUS,
+ PDRIVE_PINGROUP_COUNT,
+};
+
+/*
+ * Functions which can be assigned to each of the pin groups. The values here
+ * bear no relation to the values programmed into pinmux registers and are
+ * purely a convenience. The translation is done through a table search.
+ */
+enum pmux_func {
+ PMUX_FUNC_AHB_CLK,
+ PMUX_FUNC_APB_CLK,
+ PMUX_FUNC_AUDIO_SYNC,
+ PMUX_FUNC_CRT,
+ PMUX_FUNC_DAP1,
+ PMUX_FUNC_DAP2,
+ PMUX_FUNC_DAP3,
+ PMUX_FUNC_DAP4,
+ PMUX_FUNC_DAP5,
+ PMUX_FUNC_DISPA,
+ PMUX_FUNC_DISPB,
+ PMUX_FUNC_EMC_TEST0_DLL,
+ PMUX_FUNC_EMC_TEST1_DLL,
+ PMUX_FUNC_GMI,
+ PMUX_FUNC_GMI_INT,
+ PMUX_FUNC_HDMI,
+ PMUX_FUNC_I2C1,
+ PMUX_FUNC_I2C2,
+ PMUX_FUNC_I2C3,
+ PMUX_FUNC_IDE,
+ PMUX_FUNC_KBC,
+ PMUX_FUNC_MIO,
+ PMUX_FUNC_MIPI_HS,
+ PMUX_FUNC_NAND,
+ PMUX_FUNC_OSC,
+ PMUX_FUNC_OWR,
+ PMUX_FUNC_PCIE,
+ PMUX_FUNC_PLLA_OUT,
+ PMUX_FUNC_PLLC_OUT1,
+ PMUX_FUNC_PLLM_OUT1,
+ PMUX_FUNC_PLLP_OUT2,
+ PMUX_FUNC_PLLP_OUT3,
+ PMUX_FUNC_PLLP_OUT4,
+ PMUX_FUNC_PWM,
+ PMUX_FUNC_PWR_INTR,
+ PMUX_FUNC_PWR_ON,
+ PMUX_FUNC_RTCK,
+ PMUX_FUNC_SDMMC1,
+ PMUX_FUNC_SDMMC2,
+ PMUX_FUNC_SDMMC3,
+ PMUX_FUNC_SDMMC4,
+ PMUX_FUNC_SFLASH,
+ PMUX_FUNC_SPDIF,
+ PMUX_FUNC_SPI1,
+ PMUX_FUNC_SPI2,
+ PMUX_FUNC_SPI2_ALT,
+ PMUX_FUNC_SPI3,
+ PMUX_FUNC_SPI4,
+ PMUX_FUNC_TRACE,
+ PMUX_FUNC_TWC,
+ PMUX_FUNC_UARTA,
+ PMUX_FUNC_UARTB,
+ PMUX_FUNC_UARTC,
+ PMUX_FUNC_UARTD,
+ PMUX_FUNC_UARTE,
+ PMUX_FUNC_ULPI,
+ PMUX_FUNC_VI,
+ PMUX_FUNC_VI_SENSOR_CLK,
+ PMUX_FUNC_XIO,
+ PMUX_FUNC_BLINK,
+ PMUX_FUNC_CEC,
+ PMUX_FUNC_CLK12,
+ PMUX_FUNC_DAP,
+ PMUX_FUNC_DAPSDMMC2,
+ PMUX_FUNC_DDR,
+ PMUX_FUNC_DEV3,
+ PMUX_FUNC_DTV,
+ PMUX_FUNC_VI_ALT1,
+ PMUX_FUNC_VI_ALT2,
+ PMUX_FUNC_VI_ALT3,
+ PMUX_FUNC_EMC_DLL,
+ PMUX_FUNC_EXTPERIPH1,
+ PMUX_FUNC_EXTPERIPH2,
+ PMUX_FUNC_EXTPERIPH3,
+ PMUX_FUNC_GMI_ALT,
+ PMUX_FUNC_HDA,
+ PMUX_FUNC_HSI,
+ PMUX_FUNC_I2C4,
+ PMUX_FUNC_I2C5,
+ PMUX_FUNC_I2CPWR,
+ PMUX_FUNC_I2S0,
+ PMUX_FUNC_I2S1,
+ PMUX_FUNC_I2S2,
+ PMUX_FUNC_I2S3,
+ PMUX_FUNC_I2S4,
+ PMUX_FUNC_NAND_ALT,
+ PMUX_FUNC_POPSDIO4,
+ PMUX_FUNC_POPSDMMC4,
+ PMUX_FUNC_PWM0,
+ PMUX_FUNC_PWM1,
+ PMUX_FUNC_PWM2,
+ PMUX_FUNC_PWM3,
+ PMUX_FUNC_SATA,
+ PMUX_FUNC_SPI5,
+ PMUX_FUNC_SPI6,
+ PMUX_FUNC_SYSCLK,
+ PMUX_FUNC_VGP1,
+ PMUX_FUNC_VGP2,
+ PMUX_FUNC_VGP3,
+ PMUX_FUNC_VGP4,
+ PMUX_FUNC_VGP5,
+ PMUX_FUNC_VGP6,
+
+ PMUX_FUNC_USB,
+ PMUX_FUNC_SOC,
+ PMUX_FUNC_CPU,
+ PMUX_FUNC_CLK,
+ PMUX_FUNC_PWRON,
+ PMUX_FUNC_PMI,
+ PMUX_FUNC_CLDVFS,
+ PMUX_FUNC_RESET_OUT_N,
+
+ PMUX_FUNC_SAFE,
+ PMUX_FUNC_MAX,
+
+ PMUX_FUNC_RSVD1 = 0x8000,
+ PMUX_FUNC_RSVD2 = 0x8001,
+ PMUX_FUNC_RSVD3 = 0x8002,
+ PMUX_FUNC_RSVD4 = 0x8003,
+};
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) ((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) \
+ || (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+
+/* return 1 if a pingrp is in range */
+#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+ PMUX_PULL_NORMAL = 0,
+ PMUX_PULL_DOWN,
+ PMUX_PULL_UP,
+};
+/* return 1 if a pin_pupd_is in range */
+#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
+ ((pupd) <= PMUX_PULL_UP))
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+ PMUX_TRI_NORMAL = 0,
+ PMUX_TRI_TRISTATE = 1,
+};
+/* return 1 if a pin_tristate_is in range */
+#define pmux_pin_tristate_isvalid(tristate) (((tristate) >= PMUX_TRI_NORMAL) \
+ && ((tristate) <= PMUX_TRI_TRISTATE))
+
+enum pmux_pin_io {
+ PMUX_PIN_OUTPUT = 0,
+ PMUX_PIN_INPUT = 1,
+};
+/* return 1 if a pin_io_is in range */
+#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
+ ((io) <= PMUX_PIN_INPUT))
+
+enum pmux_pin_lock {
+ PMUX_PIN_LOCK_DEFAULT = 0,
+ PMUX_PIN_LOCK_DISABLE,
+ PMUX_PIN_LOCK_ENABLE,
+};
+/* return 1 if a pin_lock is in range */
+#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
+ ((lock) <= PMUX_PIN_LOCK_ENABLE))
+
+enum pmux_pin_od {
+ PMUX_PIN_OD_DEFAULT = 0,
+ PMUX_PIN_OD_DISABLE,
+ PMUX_PIN_OD_ENABLE,
+};
+/* return 1 if a pin_od is in range */
+#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
+ ((od) <= PMUX_PIN_OD_ENABLE))
+
+enum pmux_pin_ioreset {
+ PMUX_PIN_IO_RESET_DEFAULT = 0,
+ PMUX_PIN_IO_RESET_DISABLE,
+ PMUX_PIN_IO_RESET_ENABLE,
+};
+/* return 1 if a pin_ioreset_is in range */
+#define pmux_pin_ioreset_isvalid(ioreset) \
+ (((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
+ ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+
+/* Available power domains used by pin groups */
+enum pmux_vddio {
+ PMUX_VDDIO_BB = 0,
+ PMUX_VDDIO_LCD,
+ PMUX_VDDIO_VI,
+ PMUX_VDDIO_UART,
+ PMUX_VDDIO_DDR,
+ PMUX_VDDIO_NAND,
+ PMUX_VDDIO_SYS,
+ PMUX_VDDIO_AUDIO,
+ PMUX_VDDIO_SD,
+ PMUX_VDDIO_CAM,
+ PMUX_VDDIO_GMI,
+ PMUX_VDDIO_PEXCTL,
+ PMUX_VDDIO_SDMMC1,
+ PMUX_VDDIO_SDMMC3,
+ PMUX_VDDIO_SDMMC4,
+
+ PMUX_VDDIO_NONE
+};
+
+/* T114 pin drive group and pin mux registers */
+#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2)
+#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
+ PDRIVE_PINGROUP_COUNT)
+struct pmux_tri_ctlr {
+ uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */
+ uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */
+ uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */
+ uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */
+ uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */
+ uint pmt_reserved4[4]; /* _TRI_STATE_REG_A/B/C/D in t20 */
+ uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */
+
+ uint pmt_reserved[528]; /* ABP_MISC_PP_ reserved offs 28-864 */
+
+ uint pmt_drive[PDRIVE_PINGROUP_COUNT]; /* pin drive grps offs 868 */
+ uint pmt_reserved5[PMUX_OFFSET];
+ uint pmt_ctl[PINGRP_COUNT]; /* mux/pupd/tri regs, offset 0x3000 */
+};
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pingroup_config {
+ enum pmux_pingrp pingroup; /* pin group PINGRP_... */
+ enum pmux_func func; /* function to assign FUNC_... */
+ enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/
+ enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */
+ enum pmux_pin_io io; /* input or output PMUX_PIN_... */
+ enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */
+ enum pmux_pin_od od; /* open-drain or push-pull driver */
+ enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */
+};
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the complete configuration for a pin group */
+void pinmux_config_pingroup(struct pingroup_config *config);
+
+/* Set a pin group to tristate or normal */
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
+
+/* Set a pin group as input or output */
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
+
+/**
+ * Configure a list of pin groups
+ *
+ * @param config List of config items
+ * @param len Number of config items in list
+ */
+void pinmux_config_table(struct pingroup_config *config, int len);
+
+/* Set a group of pins from a table */
+void pinmux_init(void);
+
+#endif /* _TEGRA114_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pmu.h b/arch/arm/include/asm/arch-tegra114/pmu.h
new file mode 100644
index 0000000..c6e2381
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/pmu.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_PMU_H_
+#define _TEGRA114_PMU_H_
+
+/* Set core and CPU voltages to nominal levels */
+int pmu_set_nominal(void);
+
+#endif /* _TEGRA114_PMU_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/spl.h b/arch/arm/include/asm/arch-tegra114/spl.h
new file mode 100644
index 0000000..ebb16fe
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/spl.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM 1
+
+#endif
diff --git a/arch/arm/include/asm/arch-tegra114/tegra.h b/arch/arm/include/asm/arch-tegra114/tegra.h
new file mode 100644
index 0000000..a3d12d6
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/tegra.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_H_
+#define _TEGRA114_H_
+
+#define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T114 */
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET 1752 /* offset to ODMDATA word */
+
+#undef NVBOOTINFOTABLE_BCTSIZE
+#undef NVBOOTINFOTABLE_BCTPTR
+#define NVBOOTINFOTABLE_BCTSIZE 0x48 /* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR 0x4C /* BCT pointer in BIT in IRAM */
+
+#define MAX_NUM_CPU 4
+
+#endif /* TEGRA114_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
@ 2013-01-28 23:32 ` Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files Tom Warren
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
This provides SPL support for T114 boards - AVP early init, plus
CPU (A15) init/jump to main U-Boot.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
- use CHIPID directly to figure num cpus
- set CPU2/3 bits at runtime using num cpus instead of ifdef
- remove private TRUE/FALSE defines, not needed now
- clrbits/setbits_le32 used instead of reg read/&/|/write
Changes in v3:
- only need to powerup the fast cluster
arch/arm/cpu/arm720t/tegra-common/cpu.c | 75 ++++----
arch/arm/cpu/arm720t/tegra-common/cpu.h | 8 +-
arch/arm/cpu/arm720t/tegra114/Makefile | 42 +++++
arch/arm/cpu/arm720t/tegra114/config.mk | 19 ++
arch/arm/cpu/arm720t/tegra114/cpu.c | 297 +++++++++++++++++++++++++++++++
5 files changed, 403 insertions(+), 38 deletions(-)
create mode 100644 arch/arm/cpu/arm720t/tegra114/Makefile
create mode 100644 arch/arm/cpu/arm720t/tegra114/config.mk
create mode 100644 arch/arm/cpu/arm720t/tegra114/cpu.c
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c
index c32925b..119342e 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c
@@ -25,30 +25,24 @@
#include <asm/arch-tegra/scu.h>
#include "cpu.h"
-enum tegra_family_t {
- TEGRA_FAMILY_T2x,
- TEGRA_FAMILY_T3x,
-};
-
-
-enum tegra_family_t get_family(void)
-{
- u32 reg, chip_id;
-
- reg = readl(NV_PA_APB_MISC_BASE + GP_HIDREV);
-
- chip_id = reg >> 8;
- chip_id &= 0xff;
- debug(" tegra_get_family: chip_id = %x\n", chip_id);
- if (chip_id == 0x30)
- return TEGRA_FAMILY_T3x;
- else
- return TEGRA_FAMILY_T2x;
-}
-
int get_num_cpus(void)
{
- return get_family() == TEGRA_FAMILY_T3x ? 4 : 2;
+ struct apb_misc_gp_ctlr *gp;
+ uint rev;
+
+ gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+ rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
+
+ switch (rev) {
+ case CHIPID_TEGRA20:
+ return 2;
+ break;
+ case CHIPID_TEGRA30:
+ case CHIPID_TEGRA114:
+ default:
+ return 4;
+ break;
+ }
}
/*
@@ -56,6 +50,7 @@ int get_num_cpus(void)
*/
struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
/* T20: 1 GHz */
+ /* n, m, p, cpcon */
{{ 1000, 13, 0, 12}, /* OSC 13M */
{ 625, 12, 0, 8}, /* OSC 19.2M */
{ 1000, 12, 0, 12}, /* OSC 12M */
@@ -75,6 +70,13 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
{ 700, 6, 0, 8},
{ 700, 13, 0, 8},
},
+
+ /* T114: 1.4 GHz */
+ {{ 862, 8, 0, 8},
+ { 583, 8, 0, 4},
+ { 696, 12, 0, 8},
+ { 700, 13, 0, 8},
+ },
};
void adjust_pllp_out_freqs(void)
@@ -159,8 +161,8 @@ void init_pllx(void)
sel = &tegra_pll_x_table[chip_type][osc];
pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon);
- /* adjust PLLP_out1-4 on T30 */
- if (chip_type == TEGRA_SOC_T30) {
+ /* adjust PLLP_out1-4 on T30/T114 */
+ if (chip_type == TEGRA_SOC_T30 || chip_type == TEGRA_SOC_T114) {
debug(" init_pllx: adjusting PLLP out freqs\n");
adjust_pllp_out_freqs();
}
@@ -196,10 +198,9 @@ void enable_cpu_clock(int enable)
*/
clk = readl(&clkrst->crc_clk_cpu_cmplx);
clk |= 1 << CPU1_CLK_STP_SHIFT;
-#if defined(CONFIG_TEGRA30)
- clk |= 1 << CPU2_CLK_STP_SHIFT;
- clk |= 1 << CPU3_CLK_STP_SHIFT;
-#endif
+ if (get_num_cpus() == 4)
+ clk |= (1 << CPU2_CLK_STP_SHIFT) + (1 << CPU3_CLK_STP_SHIFT);
+
/* Stop/Unstop the CPU clock */
clk &= ~CPU0_CLK_STP_MASK;
clk |= !enable << CPU0_CLK_STP_SHIFT;
@@ -285,7 +286,8 @@ void reset_A9_cpu(int reset)
void clock_enable_coresight(int enable)
{
- u32 rst, src;
+ u32 rst, src = 2;
+ int chip;
debug("clock_enable_coresight entry\n");
clock_set_enable(PERIPH_ID_CORESIGHT, enable);
@@ -301,20 +303,23 @@ void clock_enable_coresight(int enable)
* Clock divider request for 204MHz would setup CSITE clock as
* 144MHz for PLLP base 216MHz and 204MHz for PLLP base 408MHz
*/
- if (tegra_get_chip_type() == TEGRA_SOC_T30)
+ chip = tegra_get_chip_type();
+ if (chip == TEGRA_SOC_T30 || chip == TEGRA_SOC_T114)
src = CLK_DIVIDER(NVBL_PLLP_KHZ, 204000);
- else
+ else if (chip == TEGRA_SOC_T20 || chip == TEGRA_SOC_T25)
src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000);
+ else
+ printf("%s: Unknown chip type %X!\n", __func__, chip);
clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
/* Unlock the CPU CoreSight interfaces */
rst = CORESIGHT_UNLOCK;
writel(rst, CSITE_CPU_DBG0_LAR);
writel(rst, CSITE_CPU_DBG1_LAR);
-#if defined(CONFIG_TEGRA30)
- writel(rst, CSITE_CPU_DBG2_LAR);
- writel(rst, CSITE_CPU_DBG3_LAR);
-#endif
+ if (get_num_cpus() == 4) {
+ writel(rst, CSITE_CPU_DBG2_LAR);
+ writel(rst, CSITE_CPU_DBG3_LAR);
+ }
}
}
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/cpu/arm720t/tegra-common/cpu.h
index 3e2ea3a..e8e05d7 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.h
+++ b/arch/arm/cpu/arm720t/tegra-common/cpu.h
@@ -26,10 +26,12 @@
#define PLL_STABILIZATION_DELAY (300)
#define IO_STABILIZATION_DELAY (1000)
-#if defined(CONFIG_TEGRA30)
-#define NVBL_PLLP_KHZ (408000)
-#else /* Tegra20 */
+#if defined(CONFIG_TEGRA20)
#define NVBL_PLLP_KHZ (216000)
+#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114)
+#define NVBL_PLLP_KHZ (408000)
+#else
+#error "Unknown Tegra chip!"
#endif
#define PLLX_ENABLED (1 << 30)
diff --git a/arch/arm/cpu/arm720t/tegra114/Makefile b/arch/arm/cpu/arm720t/tegra114/Makefile
new file mode 100644
index 0000000..6cf7fe9
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra114/Makefile
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+#COBJS-y += cpu.o t11x.o
+COBJS-y += cpu.o
+
+SRCS := $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm720t/tegra114/config.mk b/arch/arm/cpu/arm720t/tegra114/config.mk
new file mode 100644
index 0000000..7947b50
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra114/config.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+USE_PRIVATE_LIBGCC = yes
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
new file mode 100644
index 0000000..5962e15
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra114/cpu.c
@@ -0,0 +1,297 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include "../tegra-common/cpu.h"
+
+/* Tegra114-specific CPU init code */
+static void enable_cpu_power_rail(void)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ debug("enable_cpu_power_rail entry\n");
+
+ /* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
+ pinmux_tristate_disable(PINGRP_PWR_I2C_SCL);
+ pinmux_tristate_disable(PINGRP_PWR_I2C_SDA);
+
+ /*
+ * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
+ * set it for 25ms (102MHz * .025)
+ */
+ reg = 0x26E8F0;
+ writel(reg, &pmc->pmc_cpupwrgood_timer);
+
+ /* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
+ clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
+ setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
+
+ /*
+ * Set CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2_0_CAR2PMC_CPU_ACK_WIDTH
+ * to 408 to satisfy the requirement of having at least 16 CPU clock
+ * cycles before clamp removal.
+ */
+
+ clrbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 0xFFF);
+ setbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 408);
+}
+
+static void enable_cpu_clocks(void)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ debug("enable_cpu_clocks entry\n");
+
+ /* Wait for PLL-X to lock */
+ do {
+ reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+ } while ((reg & (1 << 27)) == 0);
+
+ /* Wait until all clocks are stable */
+ udelay(PLL_STABILIZATION_DELAY);
+
+ writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+ writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+
+ /* Always enable the main CPU complex clocks */
+ clock_enable(PERIPH_ID_CPU);
+ clock_enable(PERIPH_ID_CPULP);
+ clock_enable(PERIPH_ID_CPUG);
+}
+
+static void remove_cpu_resets(void)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ debug("remove_cpu_resets entry\n");
+ /* Take the slow non-CPU partition out of reset */
+ reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
+ writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpulp_cmplx_clr);
+
+ /* Take the fast non-CPU partition out of reset */
+ reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
+ writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpug_cmplx_clr);
+
+ /* Clear the SW-controlled reset of the slow cluster */
+ reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
+ reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
+ writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
+
+ /* Clear the SW-controlled reset of the fast cluster */
+ reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
+ reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
+ reg |= (CLR_CPURESET1+CLR_DBGRESET1+CLR_CORERESET1+CLR_CXRESET1);
+ reg |= (CLR_CPURESET2+CLR_DBGRESET2+CLR_CORERESET2+CLR_CXRESET2);
+ reg |= (CLR_CPURESET3+CLR_DBGRESET3+CLR_CORERESET3+CLR_CXRESET3);
+ writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
+}
+
+/**
+ * The T114 requires some special clock initialization, including setting up
+ * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
+ */
+void t114_init_clocks(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+ u32 val;
+
+ debug("t114_init_clocks entry\n");
+
+ /* Set active CPU cluster to G */
+ clrbits_le32(&flow->cluster_control, 1);
+
+ /*
+ * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run
+ * at 108 MHz. This is glitch free as only the source is changed, no
+ * special precaution needed.
+ */
+ val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
+ (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
+ (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
+ (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
+ (SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
+ writel(val, &clkrst->crc_sclk_brst_pol);
+
+ writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
+
+ debug("Setting up PLLX\n");
+ init_pllx();
+
+ val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
+ writel(val, &clkrst->crc_clk_sys_rate);
+
+ /* Enable clocks to required peripherals. TBD - minimize this list */
+ debug("Enabling clocks\n");
+
+ clock_set_enable(PERIPH_ID_CACHE2, 1);
+ clock_set_enable(PERIPH_ID_GPIO, 1);
+ clock_set_enable(PERIPH_ID_TMR, 1);
+ clock_set_enable(PERIPH_ID_RTC, 1);
+ clock_set_enable(PERIPH_ID_CPU, 1);
+ clock_set_enable(PERIPH_ID_EMC, 1);
+ clock_set_enable(PERIPH_ID_I2C5, 1);
+ clock_set_enable(PERIPH_ID_FUSE, 1);
+ clock_set_enable(PERIPH_ID_PMC, 1);
+ clock_set_enable(PERIPH_ID_APBDMA, 1);
+ clock_set_enable(PERIPH_ID_MEM, 1);
+ clock_set_enable(PERIPH_ID_IRAMA, 1);
+ clock_set_enable(PERIPH_ID_IRAMB, 1);
+ clock_set_enable(PERIPH_ID_IRAMC, 1);
+ clock_set_enable(PERIPH_ID_IRAMD, 1);
+ clock_set_enable(PERIPH_ID_CORESIGHT, 1);
+ clock_set_enable(PERIPH_ID_MSELECT, 1);
+ clock_set_enable(PERIPH_ID_EMC1, 1);
+ clock_set_enable(PERIPH_ID_MC1, 1);
+ clock_set_enable(PERIPH_ID_DVFS, 1);
+
+ /* Switch MSELECT clock to PLLP (00) */
+ clock_ll_set_source(PERIPH_ID_MSELECT, 0);
+
+ /*
+ * Clock divider request for 102MHz would setup MSELECT clock as
+ * 102MHz for PLLP base 408MHz
+ */
+ clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
+ (NVBL_PLLP_KHZ/102000));
+
+ /* I2C5 (DVC) gets CLK_M and a divisor of 17 */
+ clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
+
+ /* Give clocks time to stabilize */
+ udelay(1000);
+
+ /* Take required peripherals out of reset */
+ debug("Taking periphs out of reset\n");
+ reset_set_enable(PERIPH_ID_CACHE2, 0);
+ reset_set_enable(PERIPH_ID_GPIO, 0);
+ reset_set_enable(PERIPH_ID_TMR, 0);
+ reset_set_enable(PERIPH_ID_COP, 0);
+ reset_set_enable(PERIPH_ID_EMC, 0);
+ reset_set_enable(PERIPH_ID_I2C5, 0);
+ reset_set_enable(PERIPH_ID_FUSE, 0);
+ reset_set_enable(PERIPH_ID_APBDMA, 0);
+ reset_set_enable(PERIPH_ID_MEM, 0);
+ reset_set_enable(PERIPH_ID_CORESIGHT, 0);
+ reset_set_enable(PERIPH_ID_MSELECT, 0);
+ reset_set_enable(PERIPH_ID_EMC1, 0);
+ reset_set_enable(PERIPH_ID_MC1, 0);
+
+ debug("t114_init_clocks exit\n");
+}
+
+static int is_partition_powered(u32 mask)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+ u32 reg;
+
+ /* Get power gate status */
+ reg = readl(&pmc->pmc_pwrgate_status);
+ return (reg & mask) == mask;
+}
+
+static int is_clamp_enabled(u32 mask)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+ u32 reg;
+
+ /* Get clamp status. TODO: Add pmc_clamp_status alias to pmc.h */
+ reg = readl(&pmc->pmc_pwrgate_timer_on);
+ return (reg & mask) == mask;
+}
+
+static void power_partition(u32 status, u32 partid)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+
+ debug("%s: status = %08X, part ID = %08X\n", __func__, status, partid);
+ /* Is the partition already on? */
+ if (!is_partition_powered(status)) {
+ /* No, toggle the partition power state (OFF -> ON) */
+ debug("power_partition, toggling state\n");
+ clrbits_le32(&pmc->pmc_pwrgate_toggle, 0x1F);
+ setbits_le32(&pmc->pmc_pwrgate_toggle, partid);
+ setbits_le32(&pmc->pmc_pwrgate_toggle, START_CP);
+
+ /* Wait for the power to come up */
+ while (!is_partition_powered(status))
+ ;
+
+ /* Wait for the clamp status to be cleared */
+ while (is_clamp_enabled(status))
+ ;
+
+ /* Give I/O signals time to stabilize */
+ udelay(IO_STABILIZATION_DELAY);
+ }
+}
+
+void powerup_cpus(void)
+{
+ debug("powerup_cpus entry\n");
+
+ /* We boot to the fast cluster */
+ debug("powerup_cpus entry: G cluster\n");
+ /* Power up the fast cluster rail partition */
+ power_partition(CRAIL, CRAILID);
+
+ /* Power up the fast cluster non-CPU partition */
+ power_partition(C0NC, C0NCID);
+
+ /* Power up the fast cluster CPU0 partition */
+ power_partition(CE0, CE0ID);
+}
+
+void start_cpu(u32 reset_vector)
+{
+ debug("start_cpu entry, reset_vector = %x\n", reset_vector);
+
+ t114_init_clocks();
+
+ /* Enable VDD_CPU */
+ enable_cpu_power_rail();
+
+ /* Get the CPU(s) running */
+ enable_cpu_clocks();
+
+ /* Enable CoreSight */
+ clock_enable_coresight(1);
+
+ /* Take CPU(s) out of reset */
+ remove_cpu_resets();
+
+ /*
+ * Set the entry point for CPU execution from reset,
+ * if it's a non-zero value.
+ */
+ if (reset_vector)
+ writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+ /* If the CPU(s) don't already have power, power 'em up */
+ powerup_cpus();
+}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files Tom Warren
@ 2013-01-28 23:32 ` Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files Tom Warren
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
These files are for code that runs on the CPU (A15) on T114 boards.
At this time, there is no A15-specific code here.
As T114-specific run-time code is added, it'll go here.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
Changes in v3:
- none
arch/arm/cpu/armv7/tegra114/Makefile | 40 +++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/tegra114/config.mk | 19 +++++++++++++++
2 files changed, 59 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra114/Makefile
create mode 100644 arch/arm/cpu/armv7/tegra114/config.mk
diff --git a/arch/arm/cpu/armv7/tegra114/Makefile b/arch/arm/cpu/armv7/tegra114/Makefile
new file mode 100644
index 0000000..eb98c8e
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra114/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/tegra114/config.mk b/arch/arm/cpu/armv7/tegra114/config.mk
new file mode 100644
index 0000000..cb1a19d
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra114/config.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+CONFIG_ARCH_DEVICE_TREE := tegra114
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files Tom Warren
@ 2013-01-28 23:32 ` Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files Tom Warren
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
These files are used by both SPL and main U-Boot.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
- use ODMDATA correctly in query_dram_size
Changes in v3:
- rename T114 SKU ID
- use common clock code
arch/arm/cpu/tegra-common/ap.c | 9 +-
arch/arm/cpu/tegra-common/board.c | 21 +-
arch/arm/cpu/tegra114-common/Makefile | 41 ++
arch/arm/cpu/tegra114-common/clock.c | 655 ++++++++++++++++++++++++++++++++
arch/arm/cpu/tegra114-common/funcmux.c | 63 +++
arch/arm/cpu/tegra114-common/pinmux.c | 506 ++++++++++++++++++++++++
6 files changed, 1291 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/cpu/tegra114-common/Makefile
create mode 100644 arch/arm/cpu/tegra114-common/clock.c
create mode 100644 arch/arm/cpu/tegra114-common/funcmux.c
create mode 100644 arch/arm/cpu/tegra114-common/pinmux.c
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index aebe29e..236cda8 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -31,6 +31,7 @@
#include <asm/arch-tegra/fuse.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/scu.h>
+#include <asm/arch-tegra/tegra.h>
#include <asm/arch-tegra/warmboot.h>
int tegra_get_chip_type(void)
@@ -42,7 +43,7 @@ int tegra_get_chip_type(void)
/*
* This is undocumented, Chip ID is bits 15:8 of the register
* APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
- * Tegra30
+ * Tegra30, and 0x35 for T114.
*/
gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
@@ -68,6 +69,12 @@ int tegra_get_chip_type(void)
return TEGRA_SOC_T30;
}
break;
+ case CHIPID_TEGRA114:
+ switch (tegra_sku_id) {
+ case SKU_ID_T114_ENG:
+ return TEGRA_SOC_T114;
+ }
+ break;
}
/* unknown sku id */
return TEGRA_SOC_UNKNOWN;
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index 1ec6c06..08bfa64 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -37,8 +37,10 @@ enum {
/* UARTs which we can enable */
UARTA = 1 << 0,
UARTB = 1 << 1,
+ UARTC = 1 << 2,
UARTD = 1 << 3,
- UART_COUNT = 4,
+ UARTE = 1 << 4,
+ UART_COUNT = 5,
};
/*
@@ -68,7 +70,7 @@ unsigned int query_sdram_size(void)
case 3:
return 0x40000000; /* 1GB */
}
-#else /* Tegra30 */
+#else /* Tegra30/Tegra114 */
/* bits 31:28 in OdmData are used for RAM size on T30 */
switch ((reg) >> 28) {
case 0:
@@ -117,12 +119,18 @@ static int uart_configs[] = {
-1,
FUNCMUX_UART4_GMC,
-1,
-#else /* Tegra30 */
+#elif defined(CONFIG_TEGRA30)
FUNCMUX_UART1_ULPI, /* UARTA */
-1,
-1,
-1,
-1,
+#else /* Tegra114 */
+ -1,
+ -1,
+ -1,
+ FUNCMUX_UART4_GMI, /* UARTD */
+ -1,
#endif
};
@@ -138,6 +146,7 @@ static void setup_uarts(int uart_ids)
PERIPH_ID_UART2,
PERIPH_ID_UART3,
PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
};
size_t i;
@@ -161,9 +170,15 @@ void board_init_uart_f(void)
#ifdef CONFIG_TEGRA_ENABLE_UARTB
uart_ids |= UARTB;
#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTC
+ uart_ids |= UARTC;
+#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTD
uart_ids |= UARTD;
#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTE
+ uart_ids |= UARTE;
+#endif
setup_uarts(uart_ids);
}
diff --git a/arch/arm/cpu/tegra114-common/Makefile b/arch/arm/cpu/tegra114-common/Makefile
new file mode 100644
index 0000000..5b53a71
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC)-common.o
+
+COBJS-y += clock.o funcmux.o pinmux.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c
new file mode 100644
index 0000000..9b29ce1
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/clock.c
@@ -0,0 +1,655 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 Clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra114 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+ CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
+ CLOCK_TYPE_MCPA, /* and so on */
+ CLOCK_TYPE_MCPT,
+ CLOCK_TYPE_PCM,
+ CLOCK_TYPE_PCMT,
+ CLOCK_TYPE_PCMT16,
+ CLOCK_TYPE_PDCT,
+ CLOCK_TYPE_ACPT,
+ CLOCK_TYPE_ASPTE,
+ CLOCK_TYPE_PMDACD2T,
+ CLOCK_TYPE_PCST,
+
+ CLOCK_TYPE_COUNT,
+ CLOCK_TYPE_NONE = -1, /* invalid clock type */
+};
+
+enum {
+ CLOCK_MAX_MUX = 8 /* number of source options for each clock */
+};
+
+enum {
+ MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */
+ MASK_BITS_31_29,
+ MASK_BITS_29_28,
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ * The extra column in each clock source array is used to store the mask
+ * bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+ { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
+ CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_29},
+ { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO),
+ CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
+ MASK_BITS_31_29},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_29_28}
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+ /* 0x00 */
+ TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
+ TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT),
+
+ /* 0x08 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_I2C5, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T),
+
+ /* 0x10 */
+ TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
+
+ /* 0x18 */
+ TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */
+ TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
+
+ /* 0x20 */
+ TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
+
+ /* 0x28 */
+ TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
+
+ /* 0x30 */
+ TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+
+ /* 0x38h */ /* Jumps to reg offset 0x3B0h */
+ TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */
+ TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT),
+
+ /* 0x40 */
+ TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+ /* 0x48 */
+ TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+ TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+ TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+
+ /* 0x50 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */
+ TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ * uint vi_sensor; _VI_SENSOR_0, 0x1A8
+ * SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+ /* Low word: 31:0 */
+ NONE(CPU),
+ NONE(COP),
+ NONE(TRIGSYS),
+ NONE(RESERVED3),
+ NONE(RTC),
+ NONE(TMR),
+ PERIPHC_UART1,
+ PERIPHC_UART2, /* and vfir 0x68 */
+
+ /* 8 */
+ NONE(GPIO),
+ PERIPHC_SDMMC2,
+ NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
+ PERIPHC_I2S1,
+ PERIPHC_I2C1,
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC4,
+
+ /* 16 */
+ NONE(RESERVED16),
+ PERIPHC_PWM,
+ PERIPHC_I2S2,
+ PERIPHC_EPP,
+ PERIPHC_VI,
+ PERIPHC_G2D,
+ NONE(USBD),
+ NONE(ISP),
+
+ /* 24 */
+ PERIPHC_G3D,
+ NONE(RESERVED25),
+ PERIPHC_DISP2,
+ PERIPHC_DISP1,
+ PERIPHC_HOST1X,
+ NONE(VCP),
+ PERIPHC_I2S0,
+ NONE(CACHE2),
+
+ /* Middle word: 63:32 */
+ NONE(MEM),
+ NONE(AHBDMA),
+ NONE(APBDMA),
+ NONE(RESERVED35),
+ NONE(RESERVED36),
+ NONE(STAT_MON),
+ NONE(RESERVED38),
+ NONE(RESERVED39),
+
+ /* 40 */
+ NONE(KFUSE),
+ NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ PERIPHC_NOR,
+ NONE(RESERVED43),
+ PERIPHC_SBC2,
+ NONE(RESERVED45),
+ PERIPHC_SBC3,
+ PERIPHC_I2C5,
+
+ /* 48 */
+ NONE(DSI),
+ PERIPHC_TVO, /* also CVE 0x40 */
+ PERIPHC_MIPI,
+ PERIPHC_HDMI,
+ NONE(CSI),
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_UART3,
+
+ /* 56 */
+ NONE(RESERVED56),
+ PERIPHC_EMC,
+ NONE(USB2),
+ NONE(USB3),
+ PERIPHC_MPE,
+ PERIPHC_VDE,
+ NONE(BSEA),
+ NONE(BSEV),
+
+ /* Upper word 95:64 */
+ PERIPHC_SPEEDO,
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_I2C3,
+ PERIPHC_SBC4,
+ PERIPHC_SDMMC3,
+ NONE(PCIE),
+ PERIPHC_OWR,
+
+ /* 72 */
+ NONE(AFI),
+ PERIPHC_CSITE,
+ NONE(PCIEXCLK),
+ NONE(AVPUCQ),
+ NONE(RESERVED76),
+ NONE(RESERVED77),
+ NONE(RESERVED78),
+ NONE(DTV),
+
+ /* 80 */
+ PERIPHC_NANDSPEED,
+ PERIPHC_I2CSLOW,
+ NONE(DSIB),
+ NONE(RESERVED83),
+ NONE(IRAMA),
+ NONE(IRAMB),
+ NONE(IRAMC),
+ NONE(IRAMD),
+
+ /* 88 */
+ NONE(CRAM2),
+ NONE(RESERVED89),
+ NONE(MDOUBLER),
+ NONE(RESERVED91),
+ NONE(SUSOUT),
+ NONE(RESERVED93),
+ NONE(RESERVED94),
+ NONE(RESERVED95),
+
+ /* V word: 31:0 */
+ NONE(CPUG),
+ NONE(CPULP),
+ PERIPHC_G3D2,
+ PERIPHC_MSELECT,
+ PERIPHC_TSENSOR,
+ PERIPHC_I2S3,
+ PERIPHC_I2S4,
+ PERIPHC_I2C4,
+
+ /* 08 */
+ PERIPHC_SBC5,
+ PERIPHC_SBC6,
+ PERIPHC_AUDIO,
+ NONE(APBIF),
+ PERIPHC_DAM0,
+ PERIPHC_DAM1,
+ PERIPHC_DAM2,
+ PERIPHC_HDA2CODEC2X,
+
+ /* 16 */
+ NONE(ATOMICS),
+ NONE(RESERVED17),
+ NONE(RESERVED18),
+ NONE(RESERVED19),
+ NONE(RESERVED20),
+ NONE(RESERVED21),
+ NONE(RESERVED22),
+ PERIPHC_ACTMON,
+
+ /* 24 */
+ NONE(RESERVED24),
+ NONE(RESERVED25),
+ NONE(RESERVED26),
+ NONE(RESERVED27),
+ PERIPHC_SATA,
+ PERIPHC_HDA,
+ NONE(RESERVED30),
+ NONE(RESERVED31),
+
+ /* W word: 31:0 */
+ NONE(HDA2HDMICODEC),
+ NONE(RESERVED1_SATACOLD),
+ NONE(RESERVED2_PCIERX0),
+ NONE(RESERVED3_PCIERX1),
+ NONE(RESERVED4_PCIERX2),
+ NONE(RESERVED5_PCIERX3),
+ NONE(RESERVED6_PCIERX4),
+ NONE(RESERVED7_PCIERX5),
+
+ /* 40 */
+ NONE(CEC),
+ NONE(PCIE2_IOBIST),
+ NONE(EMC_IOBIST),
+ NONE(HDMI_IOBIST),
+ NONE(SATA_IOBIST),
+ NONE(MIPI_IOBIST),
+ NONE(EMC1_IOBIST),
+ NONE(XUSB),
+
+ /* 48 */
+ NONE(CILAB),
+ NONE(CILCD),
+ NONE(CILE),
+ NONE(DSIA_LP),
+ NONE(DSIB_LP),
+ NONE(RESERVED21_ENTROPY),
+ NONE(RESERVED22_W),
+ NONE(RESERVED23_W),
+
+ /* 56 */
+ NONE(RESERVED24_W),
+ NONE(AMX0),
+ NONE(ADX0),
+ NONE(DVFS),
+ NONE(XUSB_SS),
+ NONE(EMC_DLL),
+ NONE(MC1),
+ NONE(EMC1),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that T30/T114 support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+ if (reg & 1) /* one of the newer freqs */
+ printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+ return reg >> 2; /* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ enum periphc_internal_id internal_id;
+
+ /* Coresight is a special case */
+ if (periph_id == PERIPH_ID_CSI)
+ return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+ assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(internal_id != -1);
+ if (internal_id >= PERIPHC_VW_FIRST) {
+ internal_id -= PERIPHC_VW_FIRST;
+ return &clkrst->crc_clk_src_vw[internal_id];
+ } else
+ return &clkrst->crc_clk_src[internal_id];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+ enum clock_type_id type;
+ enum periphc_internal_id internal_id;
+ int mux;
+
+ assert(clock_periph_id_isvalid(periph_id));
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(periphc_internal_id_isvalid(internal_id));
+
+ type = clock_periph_type[internal_id];
+ assert(clock_type_id_isvalid(type));
+
+ *mux_bits = clock_source[type][CLOCK_MAX_MUX];
+
+ if (type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+ if (clock_source[type][mux] == parent)
+ return mux;
+
+ /* if we get here, either us or the caller has made a mistake */
+ printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+ parent);
+ return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *clk;
+ u32 reg;
+
+ /* Enable/disable the clock to this peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+ clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+ else
+ clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+ reg = readl(clk);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *reset;
+ u32 reg;
+
+ /* Enable/disable reset to the peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ if (periph_id < PERIPH_ID_VW_FIRST)
+ reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+ else
+ reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+ reg = readl(reset);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, reset);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id Clock ID according to tegra114 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+ if (clk_id > PERIPH_ID_COUNT)
+ return PERIPH_ID_NONE;
+
+ switch (clk_id) {
+ case PERIPH_ID_RESERVED3:
+ case PERIPH_ID_RESERVED16:
+ case PERIPH_ID_RESERVED24:
+ case PERIPH_ID_RESERVED35:
+ case PERIPH_ID_RESERVED43:
+ case PERIPH_ID_RESERVED45:
+ case PERIPH_ID_RESERVED56:
+ case PERIPH_ID_RESERVED76:
+ case PERIPH_ID_RESERVED77:
+ case PERIPH_ID_RESERVED78:
+ case PERIPH_ID_RESERVED83:
+ case PERIPH_ID_RESERVED89:
+ case PERIPH_ID_RESERVED91:
+ case PERIPH_ID_RESERVED93:
+ case PERIPH_ID_RESERVED94:
+ case PERIPH_ID_RESERVED95:
+ return PERIPH_ID_NONE;
+ default:
+ return clk_id;
+ }
+}
+#endif /* CONFIG_OF_CONTROL */
+
+void clock_early_init(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+ /*
+ * PLLP output frequency set to 408Mhz
+ * PLLC output frequency set to 600Mhz
+ * PLLD output frequency set to 925Mhz
+ */
+ switch (clock_get_osc_freq()) {
+ case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+ break;
+
+ case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+ break;
+
+ case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+ break;
+ case CLOCK_OSC_FREQ_19_2:
+ default:
+ /*
+ * These are not supported. It is too early to print a
+ * message and the UART likely won't work anyway due to the
+ * oscillator being wrong.
+ */
+ break;
+ }
+
+ /* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */
+ writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]);
+
+ /* PLLC_MISC: Set LOCK_ENABLE */
+ writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc);
+ udelay(2);
+
+ /* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */
+ writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+ udelay(2);
+}
diff --git a/arch/arm/cpu/tegra114-common/funcmux.c b/arch/arm/cpu/tegra114-common/funcmux.c
new file mode 100644
index 0000000..5af7550
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/funcmux.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+ int bad_config = config != FUNCMUX_DEFAULT;
+
+ switch (id) {
+ case PERIPH_ID_UART4:
+ switch (config) {
+ case FUNCMUX_UART4_GMI:
+ pinmux_set_func(PINGRP_GMI_A16, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A17, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A18, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A19, PMUX_FUNC_UARTD);
+
+ pinmux_set_io(PINGRP_GMI_A16, PMUX_PIN_OUTPUT);
+ pinmux_set_io(PINGRP_GMI_A17, PMUX_PIN_INPUT);
+ pinmux_set_io(PINGRP_GMI_A18, PMUX_PIN_INPUT);
+ pinmux_set_io(PINGRP_GMI_A19, PMUX_PIN_OUTPUT);
+
+ pinmux_tristate_disable(PINGRP_GMI_A16);
+ pinmux_tristate_disable(PINGRP_GMI_A17);
+ pinmux_tristate_disable(PINGRP_GMI_A18);
+ pinmux_tristate_disable(PINGRP_GMI_A19);
+ break;
+ }
+ break;
+
+ /* Add other periph IDs here as needed */
+
+ default:
+ debug("%s: invalid periph_id %d", __func__, id);
+ return -1;
+ }
+
+ if (bad_config) {
+ debug("%s: invalid config %d for periph_id %d", __func__,
+ config, id);
+ return -1;
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
new file mode 100644
index 0000000..52b3ec4
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/pinmux.h>
+
+struct tegra_pingroup_desc {
+ const char *name;
+ enum pmux_func funcs[4];
+ enum pmux_func func_safe;
+ enum pmux_vddio vddio;
+ enum pmux_pin_io io;
+};
+
+#define PMUX_MUXCTL_SHIFT 0
+#define PMUX_PULL_SHIFT 2
+#define PMUX_TRISTATE_SHIFT 4
+#define PMUX_TRISTATE_MASK (1 << PMUX_TRISTATE_SHIFT)
+#define PMUX_IO_SHIFT 5
+#define PMUX_OD_SHIFT 6
+#define PMUX_LOCK_SHIFT 7
+#define PMUX_IO_RESET_SHIFT 8
+
+/* Convenient macro for defining pin group properties */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \
+ { \
+ .vddio = PMUX_VDDIO_ ## vdd, \
+ .funcs = { \
+ PMUX_FUNC_ ## f0, \
+ PMUX_FUNC_ ## f1, \
+ PMUX_FUNC_ ## f2, \
+ PMUX_FUNC_ ## f3, \
+ }, \
+ .func_safe = PMUX_FUNC_RSVD1, \
+ .io = PMUX_PIN_ ## iod, \
+ }
+
+/* Input and output pins */
+#define PINI(pg_name, vdd, f0, f1, f2, f3) \
+ PIN(pg_name, vdd, f0, f1, f2, f3, INPUT)
+#define PINO(pg_name, vdd, f0, f1, f2, f3) \
+ PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+ /* NAME VDD f0 f1 f2 f3 */
+ PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA1, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA2, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA3, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA4, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA5, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA6, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA7, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_CLK, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_DIR, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_NXT, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_STP, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(DAP3_FS, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_DIN, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_DOUT, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_SCLK, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(GPIO_PV0, BB, USB, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PV1, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC1_CLK, SDMMC1, SDMMC1, CLK12, RSVD3, RSVD4),
+ PINI(SDMMC1_CMD, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA),
+ PINI(SDMMC1_DAT3, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA),
+ PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA),
+ PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA),
+ PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA),
+ PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4),
+ PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4),
+ PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4),
+ PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4),
+ PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4),
+ PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4),
+ PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
+ PINI(UART2_CTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
+ PINI(UART3_TXD, UART, UARTC, RSVD2, RSVD3, SPI4),
+ PINI(UART3_RXD, UART, UARTC, RSVD2, RSVD3, SPI4),
+ PINI(UART3_CTS_N, UART, UARTC, SDMMC1, DTV, SPI4),
+ PINI(UART3_RTS_N, UART, UARTC, PWM0, DTV, DISPA),
+ PINI(GPIO_PU0, UART, OWR, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU1, UART, RSVD1, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU2, UART, RSVD1, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU3, UART, PWM0, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU4, UART, PWM1, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU5, UART, PWM2, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU6, UART, PWM3, UARTA, USB, DISPB),
+ PINI(GEN1_I2C_SDA, UART, I2C1, RSVD2, RSVD3, RSVD4),
+ PINI(GEN1_I2C_SCL, UART, I2C1, RSVD2, RSVD3, RSVD4),
+ PINI(DAP4_FS, UART, I2S3, RSVD2, DTV, RSVD4),
+ PINI(DAP4_DIN, UART, I2S3, RSVD2, RSVD3, RSVD4),
+ PINI(DAP4_DOUT, UART, I2S3, RSVD2, DTV, RSVD4),
+ PINI(DAP4_SCLK, UART, I2S3, RSVD2, RSVD3, RSVD4),
+ PINI(CLK3_OUT, UART, EXTPERIPH3, RSVD2, RSVD3, RSVD4),
+ PINI(CLK3_REQ, UART, DEV3, RSVD2, RSVD3, RSVD4),
+ PINI(GMI_WP_N, GMI, RSVD1, NAND, GMI, GMI_ALT),
+ PINI(GMI_IORDY, GMI, SDMMC2, RSVD2, GMI, TRACE),
+ PINI(GMI_WAIT, GMI, SPI4, NAND, GMI, DTV),
+ PINI(GMI_ADV_N, GMI, RSVD1, NAND, GMI, TRACE),
+ PINI(GMI_CLK, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_CS0_N, GMI, RSVD1, NAND, GMI, USB),
+ PINI(GMI_CS1_N, GMI, RSVD1, NAND, GMI, SOC),
+ PINI(GMI_CS2_N, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_CS3_N, GMI, SDMMC2, NAND, GMI, GMI_ALT),
+ PINI(GMI_CS4_N, GMI, USB, NAND, GMI, TRACE),
+ PINI(GMI_CS6_N, GMI, NAND, NAND_ALT, GMI, SPI4),
+ PINI(GMI_CS7_N, GMI, NAND, NAND_ALT, GMI, SDMMC2),
+ PINI(GMI_AD0, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD1, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD2, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD3, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD4, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD5, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD6, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD7, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD8, GMI, PWM0, NAND, GMI, DTV),
+ PINI(GMI_AD9, GMI, PWM1, NAND, GMI, CLDVFS),
+ PINI(GMI_AD10, GMI, PWM2, NAND, GMI, CLDVFS),
+ PINI(GMI_AD11, GMI, PWM3, NAND, GMI, USB),
+ PINI(GMI_AD12, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(GMI_AD13, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(GMI_AD14, GMI, SDMMC2, NAND, GMI, DTV),
+ PINI(GMI_AD15, GMI, SDMMC2, NAND, GMI, DTV),
+ PINI(GMI_A16, GMI, UARTD, TRACE, GMI, GMI_ALT),
+ PINI(GMI_A17, GMI, UARTD, RSVD2, GMI, TRACE),
+ PINI(GMI_A18, GMI, UARTD, RSVD2, GMI, TRACE),
+ PINI(GMI_A19, GMI, UARTD, SPI4, GMI, TRACE),
+ PINI(GMI_WR_N, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_OE_N, GMI, RSVD1, NAND, GMI, SOC),
+ PINI(GMI_DQS, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_RST_N, GMI, NAND, NAND_ALT, GMI, RSVD4),
+ PINI(GEN2_I2C_SCL, GMI, I2C2, RSVD2, GMI, RSVD4),
+ PINI(GEN2_I2C_SDA, GMI, I2C2, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_CLK, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_CMD, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_DAT0, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT1, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT2, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT3, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT4, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4),
+ PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4),
+ PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3),
+ PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4),
+ PINI(CAM_I2C_SDA, CAM, VGP2, I2C3, RSVD3, RSVD4),
+ PINI(GPIO_PBB3, CAM, VGP3, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB4, CAM, VGP4, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB5, CAM, VGP5, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB6, CAM, VGP6, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB7, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PCC2, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(JTAG_RTCK, SYS, RTCK, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_I2C_SCL, SYS, I2CPWR, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_I2C_SDA, SYS, I2CPWR, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW0, SYS, KBC, RSVD2, DTV, RSVD4),
+ PINI(KB_ROW1, SYS, KBC, RSVD2, DTV, RSVD4),
+ PINI(KB_ROW2, SYS, KBC, RSVD2, DTV, SOC),
+ PINI(KB_ROW3, SYS, KBC, DISPA, RSVD3, DISPB),
+ PINI(KB_ROW4, SYS, KBC, DISPA, SPI2, DISPB),
+ PINI(KB_ROW5, SYS, KBC, DISPA, SPI2, DISPB),
+ PINI(KB_ROW6, SYS, KBC, DISPA, RSVD3, DISPB),
+ PINI(KB_ROW7, SYS, KBC, RSVD2, CLDVFS, UARTA),
+ PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL),
+ PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL),
+ PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(KB_COL3, SYS, KBC, DISPA, PWM2, UARTA),
+ PINI(KB_COL4, SYS, KBC, OWR, SDMMC3, UARTA),
+ PINI(KB_COL5, SYS, KBC, RSVD2, SDMMC1, RSVD4),
+ PINI(KB_COL6, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(KB_COL7, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(CLK_32K_OUT, SYS, BLINK, SOC, RSVD3, RSVD4),
+ PINI(SYS_CLK_REQ, SYS, SYSCLK, RSVD2, RSVD3, RSVD4),
+ PINI(CORE_PWR_REQ, SYS, PWRON, RSVD2, RSVD3, RSVD4),
+ PINI(CPU_PWR_REQ, SYS, CPU, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_INT_N, SYS, PMI, RSVD2, RSVD3, RSVD4),
+ PINI(CLK_32K_IN, SYS, CLK, RSVD2, RSVD3, RSVD4),
+ PINI(OWR, SYS, OWR, RSVD2, RSVD3, RSVD4),
+ PINI(DAP1_FS, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_DIN, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_DOUT, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_SCLK, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(CLK1_REQ, AUDIO, DAP, DAP1, RSVD3, RSVD4),
+ PINI(CLK1_OUT, AUDIO, EXTPERIPH1, DAP2, RSVD3, RSVD4),
+ PINI(SPDIF_IN, AUDIO, SPDIF, USB, RSVD3, RSVD4),
+ PINI(SPDIF_OUT, AUDIO, SPDIF, RSVD2, RSVD3, RSVD4),
+ PINI(DAP2_FS, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4),
+ PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4),
+ PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2),
+ PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4),
+ PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
+ PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3),
+ PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
+ PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3),
+ PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3),
+ PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3),
+ PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC),
+ PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA),
+ PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4),
+ PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1),
+ PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1),
+ PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *tri = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin */
+ assert(pmux_pingrp_isvalid(pin));
+
+ reg = readl(tri);
+ if (enable)
+ reg |= PMUX_TRISTATE_MASK;
+ else
+ reg &= ~PMUX_TRISTATE_MASK;
+ writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pull = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and pupd */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_pupd_isvalid(pupd));
+
+ reg = readl(pull);
+ reg &= ~(0x3 << PMUX_PULL_SHIFT);
+ reg |= (pupd << PMUX_PULL_SHIFT);
+ writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *muxctl = &pmt->pmt_ctl[pin];
+ int i, mux = -1;
+ u32 reg;
+
+ /* Error check on pin and func */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_func_isvalid(func));
+
+ /* Handle special values */
+ if (func == PMUX_FUNC_SAFE)
+ func = tegra_soc_pingroups[pin].func_safe;
+
+ if (func & PMUX_FUNC_RSVD1) {
+ mux = func & 0x3;
+ } else {
+ /* Search for the appropriate function */
+ for (i = 0; i < 4; i++) {
+ if (tegra_soc_pingroups[pin].funcs[i] == func) {
+ mux = i;
+ break;
+ }
+ }
+ }
+ assert(mux != -1);
+
+ reg = readl(muxctl);
+ reg &= ~(0x3 << PMUX_MUXCTL_SHIFT);
+ reg |= (mux << PMUX_MUXCTL_SHIFT);
+ writel(reg, muxctl);
+
+}
+
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_io = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and io */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_io_isvalid(io));
+
+ reg = readl(pin_io);
+ reg &= ~(0x1 << PMUX_IO_SHIFT);
+ reg |= (io & 0x1) << PMUX_IO_SHIFT;
+ writel(reg, pin_io);
+}
+
+static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_lock = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and lock */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_lock_isvalid(lock));
+
+ if (lock == PMUX_PIN_LOCK_DEFAULT)
+ return 0;
+
+ reg = readl(pin_lock);
+ reg &= ~(0x1 << PMUX_LOCK_SHIFT);
+ if (lock == PMUX_PIN_LOCK_ENABLE)
+ reg |= (0x1 << PMUX_LOCK_SHIFT);
+ else {
+ /* lock == DISABLE, which isn't possible */
+ printf("%s: Warning: lock == %d, DISABLE is not allowed!\n",
+ __func__, lock);
+ }
+ writel(reg, pin_lock);
+
+ return 0;
+}
+
+static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_od = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and od */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_od_isvalid(od));
+
+ if (od == PMUX_PIN_OD_DEFAULT)
+ return 0;
+
+ reg = readl(pin_od);
+ reg &= ~(0x1 << PMUX_OD_SHIFT);
+ if (od == PMUX_PIN_OD_ENABLE)
+ reg |= (0x1 << PMUX_OD_SHIFT);
+ writel(reg, pin_od);
+
+ return 0;
+}
+
+static int pinmux_set_ioreset(enum pmux_pingrp pin,
+ enum pmux_pin_ioreset ioreset)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_ioreset = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and ioreset */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_ioreset_isvalid(ioreset));
+
+ if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+ return 0;
+
+ reg = readl(pin_ioreset);
+ reg &= ~(0x1 << PMUX_IO_RESET_SHIFT);
+ if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+ reg |= (0x1 << PMUX_IO_RESET_SHIFT);
+ writel(reg, pin_ioreset);
+
+ return 0;
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+ enum pmux_pingrp pin = config->pingroup;
+
+ pinmux_set_func(pin, config->func);
+ pinmux_set_pullupdown(pin, config->pull);
+ pinmux_set_tristate(pin, config->tristate);
+ pinmux_set_io(pin, config->io);
+ pinmux_set_lock(pin, config->lock);
+ pinmux_set_od(pin, config->od);
+ pinmux_set_ioreset(pin, config->ioreset);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ pinmux_config_pingroup(&config[i]);
+}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
` (2 preceding siblings ...)
2013-01-28 23:32 ` [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files Tom Warren
@ 2013-01-28 23:32 ` Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support Tom Warren
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
These are stripped down for bringup, They'll be filled out later
to match-up with the kernel DT contents, and/or as devices are
brought up (mmc, usb, spi, etc.).
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- change memory size to 2GB
Changes in v3:
- none
arch/arm/dts/tegra114.dtsi | 5 +++++
board/nvidia/dts/tegra114-dalmore.dts | 13 +++++++++++++
2 files changed, 18 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/dts/tegra114.dtsi
create mode 100644 board/nvidia/dts/tegra114-dalmore.dts
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
new file mode 100644
index 0000000..d06cd12
--- /dev/null
+++ b/arch/arm/dts/tegra114.dtsi
@@ -0,0 +1,5 @@
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "nvidia,tegra114";
+};
diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts
new file mode 100644
index 0000000..7315577
--- /dev/null
+++ b/board/nvidia/dts/tegra114-dalmore.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "NVIDIA Dalmore";
+ compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
` (3 preceding siblings ...)
2013-01-28 23:32 ` [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files Tom Warren
@ 2013-01-28 23:32 ` Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board) Tom Warren
2013-01-29 0:43 ` [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Stephen Warren
6 siblings, 0 replies; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
This patch adds basic Tegra114 (T114) build support - no specific
board is targeted.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- none
Changes in v3:
- none
board/nvidia/common/board.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index a4af539..e986fcf 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -196,7 +196,7 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
int board_early_init_f(void)
{
-#if defined(CONFIG_TEGRA30)
+#if !defined(CONFIG_TEGRA20)
pinmux_init();
#endif
board_init_uart_f();
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
` (4 preceding siblings ...)
2013-01-28 23:32 ` [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support Tom Warren
@ 2013-01-28 23:32 ` Tom Warren
2013-02-02 1:06 ` Allen Martin
2013-01-29 0:43 ` [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Stephen Warren
6 siblings, 1 reply; 9+ messages in thread
From: Tom Warren @ 2013-01-28 23:32 UTC (permalink / raw)
To: u-boot
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
- use correct table names in pinmux_init
Changes in v3:
- none
board/nvidia/dalmore/Makefile | 36 ++++
board/nvidia/dalmore/dalmore.c | 32 ++++
board/nvidia/dalmore/pinmux-config-dalmore.h | 249 ++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/dalmore.h | 50 +++++
include/configs/tegra114-common.h | 79 ++++++++
6 files changed, 447 insertions(+), 0 deletions(-)
create mode 100644 board/nvidia/dalmore/Makefile
create mode 100644 board/nvidia/dalmore/dalmore.c
create mode 100644 board/nvidia/dalmore/pinmux-config-dalmore.h
create mode 100644 include/configs/dalmore.h
create mode 100644 include/configs/tegra114-common.h
diff --git a/board/nvidia/dalmore/Makefile b/board/nvidia/dalmore/Makefile
new file mode 100644
index 0000000..699b9f6
--- /dev/null
+++ b/board/nvidia/dalmore/Makefile
@@ -0,0 +1,36 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := $(BOARD).o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
new file mode 100644
index 0000000..aca3c7d
--- /dev/null
+++ b/board/nvidia/dalmore/dalmore.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-dalmore.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_table(tegra114_pinmux_common,
+ ARRAY_SIZE(tegra114_pinmux_common));
+
+ pinmux_config_table(unused_pins_lowpower,
+ ARRAY_SIZE(unused_pins_lowpower));
+}
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
new file mode 100644
index 0000000..3dd47da
--- /dev/null
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _PINMUX_CONFIG_DALMORE_H_
+#define _PINMUX_CONFIG_DALMORE_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+static struct pingroup_config tegra114_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_WP_N, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C1 pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C3 pinmux */
+ I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C4 pinmux */
+ I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* Power I2C pinmux */
+ I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1, UARTA, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV1, RSVD1, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS1_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS2_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* GPIOs */
+ /* SDMMC1 CD gpio */
+ DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT),
+
+ /* Touch RESET */
+ DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT),
+
+ /* Power rails GPIO */
+ DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+ DEFAULT_PINMUX(GMI_CS0_N, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS3_N, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS4_N, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+#endif /* _PINMUX_CONFIG_DALMORE_H_ */
diff --git a/boards.cfg b/boards.cfg
index b519bc4..bd2ae3d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -291,6 +291,7 @@ seaboard arm armv7:arm720t seaboard nvidia
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
cardhu arm armv7:arm720t cardhu nvidia tegra30
+dalmore arm armv7:arm720t dalmore nvidia tegra114
colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
new file mode 100644
index 0000000..ce32c80
--- /dev/null
+++ b/include/configs/dalmore.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+
+#include "tegra114-common.h"
+
+/* Must be off for Dalmore to boot !?!? FIXME */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra114 (Dalmore) # "
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#define CONFIG_MACH_TYPE MACH_TYPE_DALMORE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ENV_IS_NOWHERE
+
+#define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
new file mode 100644
index 0000000..0033530
--- /dev/null
+++ b/include/configs/tegra114-common.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_COMMON_H_
+#define _TEGRA114_COMMON_H_
+#include "tegra-common.h"
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_TEGRA114 /* in a NVidia Tegra114 core */
+
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */
+#define CONFIG_STACKBASE 0x82800000 /* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE 0x8010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x90000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE 0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
+#define CONFIG_SPL_STACK 0x800ffffc
+
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds"
+
+#endif /* _TEGRA114_COMMON_H_ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
` (5 preceding siblings ...)
2013-01-28 23:32 ` [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board) Tom Warren
@ 2013-01-29 0:43 ` Stephen Warren
6 siblings, 0 replies; 9+ messages in thread
From: Stephen Warren @ 2013-01-29 0:43 UTC (permalink / raw)
To: u-boot
On 01/28/2013 04:32 PM, Tom Warren wrote:
> Common Tegra files are in arch-tegra, shared between T20/T30/T114.
> Tegra114-specific headers are in arch-tegra114. Note that some of
> these will be filled in as more T114 support is added (drivers,
> WB/LP0 support, etc.).
The series briefly,
Reviewed-by: Stephen Warren <swarren@nvidia.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
2013-01-28 23:32 ` [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board) Tom Warren
@ 2013-02-02 1:06 ` Allen Martin
0 siblings, 0 replies; 9+ messages in thread
From: Allen Martin @ 2013-02-02 1:06 UTC (permalink / raw)
To: u-boot
On Mon, Jan 28, 2013 at 03:32:13PM -0800, Tom Warren wrote:
> This build is stripped down. It boots to the command prompt.
> GPIO is the only peripheral supported. Others TBD.
>
> Signed-off-by: Tom Warren <twarren@nvidia.com>
> ---
> Changes in v2:
> - update all new copyright header dates to 2013
> - use correct table names in pinmux_init
> Changes in v3:
> - none
>
> ...
>
> +
> +#define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */
> +
Why not just update mach-types.h?
-Allen
--
nvpublic
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-02-02 1:06 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board) Tom Warren
2013-02-02 1:06 ` Allen Martin
2013-01-29 0:43 ` [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Stephen Warren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox