public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/22] ARM: sunxi: watchdog support
Date: Sun, 3 Feb 2013 00:55:58 +0100	[thread overview]
Message-ID: <20130203005558.3eb62c3c@lilith> (raw)
In-Reply-To: <1353844031.17518.35.camel@home.hno.se>

Hi Henrik,

On Sun, 25 Nov 2012 12:47:11 +0100, Henrik Nordstr?m
<henrik@henriknordstrom.net> wrote:

> This adds support for the hardware watchdog in Allwinner
> sun4i & sun5i (sunxi) SoC familiy.
> 
> From: Henrik Nordstrom <henrik@henriknordstrom.net>
> 
> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
> Signed-off-by: Stefan Roese <sr@denx.de>
> ---
>  arch/arm/cpu/armv7/sunxi/board.c            |    3 ++
>  arch/arm/include/asm/arch-sunxi/sys_proto.h |    1 -
>  drivers/watchdog/Makefile                   |    1 +
>  drivers/watchdog/sunxi_watchdog.c           |   49 +++++++++++++++++++++++++++
>  include/configs/sunxi-common.h              |    4 ++
>  5 files changed, 57 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/watchdog/sunxi_watchdog.c
> 
> diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
> index 652c19d..5c94110 100644
> --- a/arch/arm/cpu/armv7/sunxi/board.c
> +++ b/arch/arm/cpu/armv7/sunxi/board.c
> @@ -59,6 +59,9 @@ int gpio_init(void)
>  /* do some early init */
>  void s_init(void)
>  {
> +#if defined(CONFIG_WATCHDOG) && defined(CONFIG_SUNXI_WATCHDOG)
> +	watchdog_set(23);	/* max possible timeout */
> +#endif
>  	clock_init();
>  	gpio_init();
>  }
> diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
> index 1e8ae5d..9729100 100644
> --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
> +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
> @@ -27,6 +27,5 @@
>  
>  void sr32(u32 *, u32, u32, u32);
>  void sdelay(unsigned long);
> -void watchdog_init(void);

Why remove this proto, and why not keep a single watchdog init code?

>  #endif
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 923acb9..50b5fae 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -28,6 +28,7 @@ LIB	:= $(obj)libwatchdog.o
>  COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
>  COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
>  COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
> +COBJS-$(CONFIG_SUNXI_WATCHDOG)    += sunxi_watchdog.o
>  
>  COBJS	:= $(COBJS-y)
>  SRCS	:= $(COBJS:.o=.c)
> diff --git a/drivers/watchdog/sunxi_watchdog.c b/drivers/watchdog/sunxi_watchdog.c
> new file mode 100644
> index 0000000..65a763d
> --- /dev/null
> +++ b/drivers/watchdog/sunxi_watchdog.c
> @@ -0,0 +1,49 @@
> +/*
> + * (C) Copyright 2012 Henrik Nordstrom <henrik@hno.se>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/arch/timer.h>
> +#include <asm/armv7.h>
> +#include <asm/io.h>
> +
> +void watchdog_reset(void)
> +{
> +	static struct sunxi_wdog *const wdog =
> +		&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
> +
> +	/* a little magic to reload the watchdog */
> +	writel(0xA57 << 1 | 1 << 0, &wdog->ctl);
> +}
> +
> +static void watchdog_set(int interval)
> +{
> +	static struct sunxi_wdog *const wdog =
> +		&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
> +
> +	/* Set timeout, reset & enable */
> +	writel(interval << 2 | 1 << 1 | 1 << 0, &wdog->mode);
> +	watchdog_reset();
> +}
> +
> +void watchdog_init(void)
> +{
> +#ifdef CONFIG_WATCHDOG
> +	watchdog_set(23);	/* max possible timeout */
> +#endif
> +}
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index c2d16fb..5bf8eea 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -202,4 +202,8 @@
>  #define CONFIG_SYS_I2C_SLAVE		0x7f
>  #define CONFIG_CMD_I2C
>  
> +/* Watchdog */
> +/* #define CONFIG_WATCHDOG */
> +/* #define CONFIG_SUNXI_WATCHDOG */
> +
>  #endif /* __CONFIG_H */


Amicalement,
-- 
Albert.

      reply	other threads:[~2013-02-02 23:55 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1353842684.git.henrik@henriknordstrom.net>
2012-11-25 11:37 ` [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support Henrik Nordström
2012-11-25 12:23   ` Luka Perkov
2012-11-25 13:08     ` Henrik Nordström
2012-11-25 19:55       ` Wolfgang Denk
2012-11-26  1:05         ` [U-Boot] [PATCH 01/22] Re: Copyright on board makefiles Henrik Nordström
2012-11-26  5:54           ` Wolfgang Denk
2012-11-25 19:52     ` [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support Wolfgang Denk
2012-11-25 18:06   ` Marek Vasut
2012-11-26  0:21     ` Henrik Nordström
2012-11-26  0:33       ` Marek Vasut
2012-11-26  5:52       ` Wolfgang Denk
2012-11-25 19:33   ` Wolfgang Denk
2012-11-25 23:53     ` Henrik Nordström
2012-11-26  8:00       ` Stefan Roese
2012-11-25 19:40   ` Wolfgang Denk
2012-11-25 11:37 ` [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver Henrik Nordström
2012-11-25 14:33   ` Luka Perkov
2012-11-25 15:39     ` Henrik Nordström
2012-11-25 17:07       ` Luka Perkov
2012-11-25 19:58       ` Wolfgang Denk
2012-11-25 19:56     ` Wolfgang Denk
2012-11-25 18:09   ` Marek Vasut
2012-11-25 19:44   ` Wolfgang Denk
2012-11-25 11:38 ` [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver Henrik Nordström
2012-11-25 14:41   ` Luka Perkov
2012-11-25 15:47     ` Henrik Nordström
2012-11-25 18:11   ` Marek Vasut
2012-11-25 19:47   ` Wolfgang Denk
2012-11-26 11:13   ` Heiko Schocher
2012-11-26 13:39     ` Henrik Nordström
2012-11-25 11:39 ` [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C) Henrik Nordström
2012-11-25 14:44   ` Luka Perkov
2012-11-25 18:13   ` Marek Vasut
2012-11-25 19:48   ` Wolfgang Denk
2012-11-25 11:40 ` [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver Henrik Nordström
2012-11-25 14:52   ` Luka Perkov
2012-11-25 18:14   ` Marek Vasut
2012-11-25 19:50   ` Wolfgang Denk
2012-11-25 21:47     ` Marek Vasut
2012-11-25 23:41     ` Henrik Nordström
2012-11-25 11:40 ` [U-Boot] [PATCH 07/22] tools: mksunixboot adding a Allwinner boot header Henrik Nordström
2012-11-25 15:01   ` Luka Perkov
2012-11-25 17:47   ` Wolfgang Denk
2012-11-25 11:41 ` [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver Henrik Nordström
2013-07-08 15:43   ` Joe Hershberger
2013-07-08 16:16     ` Tom Rini
2013-07-08 16:29       ` Joe Hershberger
2013-07-08 19:03         ` Tom Rini
2012-11-25 11:42 ` [U-Boot] [PATCH 09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards Henrik Nordström
2012-11-25 15:05   ` Luka Perkov
2012-11-25 11:43 ` [U-Boot] [PATCH 10/22] sunxi: Add more network commands and netconsole support Henrik Nordström
2012-11-25 15:07   ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC Henrik Nordström
2012-11-25 15:11   ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 12/22] ARM sunxi: SPL support for Olimex A13-OLinuXino board Henrik Nordström
2012-11-25 15:17   ` Luka Perkov
2012-11-25 11:44 ` [U-Boot] [PATCH 13/22] ARM sunxi: SPL support for Mele A1000 board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 14/22] ARM sunxi: SPL support for Cubieboard board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 15/22] ARM sunxi: SPL support for Hackberry 1GB board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 16/22] ARM sunxi: SPL support for a13_mid board Henrik Nordström
2012-11-25 11:45 ` [U-Boot] [PATCH 17/22] ARM sunxi: SPL support for Mini-X board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 18/22] ARM sunxi: SPL support for hyundai A7HD board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 19/22] ARM sunxi: SPL support for MK802 board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 20/22] ARM sunxi: SPL support for Rikomagic MK802II board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 21/22] ARM sunxi: SPL support for Mele A3700 board Henrik Nordström
2012-11-25 11:46 ` [U-Boot] [PATCH 22/22] ARM sunxi: SPL support for Olinuxino A13 Micro Henrik Nordström
2012-11-25 11:47 ` [U-Boot] [PATCH 04/22] ARM: sunxi: watchdog support Henrik Nordström
2013-02-02 23:55   ` Albert ARIBAUD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130203005558.3eb62c3c@lilith \
    --to=albert.u.boot@aribaud.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox