* [U-Boot] Watchdog Handlers
@ 2013-02-04 5:55 Gurucharan Ch
2013-02-04 8:54 ` Albert ARIBAUD
0 siblings, 1 reply; 2+ messages in thread
From: Gurucharan Ch @ 2013-02-04 5:55 UTC (permalink / raw)
To: u-boot
Hi Everyone,
I know how to initialise watchdog registers &
and how to change delay using WLDR reg, but I'm not getting how to use
pre-scalar(i.e. WCLR reg), and one more thing is I want to stop the
counter register of watchdog after it has reached certain point I want
to know what is the procedure to stop watchdog counter after
initialisation. Please guide me in this issue.
Thanks & Regards,
Guru Charan
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Watchdog Handlers
2013-02-04 5:55 [U-Boot] Watchdog Handlers Gurucharan Ch
@ 2013-02-04 8:54 ` Albert ARIBAUD
0 siblings, 0 replies; 2+ messages in thread
From: Albert ARIBAUD @ 2013-02-04 8:54 UTC (permalink / raw)
To: u-boot
Hi Gurucharan,
On Mon, 04 Feb 2013 11:25:35 +0530, Gurucharan Ch
<gurucharanch@uurmi.com> wrote:
> Hi Everyone,
>
> I know how to initialise watchdog registers &
> and how to change delay using WLDR reg, but I'm not getting how to use
> pre-scalar(i.e. WCLR reg), and one more thing is I want to stop the
> counter register of watchdog after it has reached certain point I want
> to know what is the procedure to stop watchdog counter after
> initialisation. Please guide me in this issue.
You haven't specified which hardware you're talking about, but anyway:
it seems like a hardware (SoC, core, architecture) question, not a
U-Boot one. Do you have the HW documentation for this watchdog module?
> Thanks & Regards,
>
> Guru Charan
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-04 8:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-04 5:55 [U-Boot] Watchdog Handlers Gurucharan Ch
2013-02-04 8:54 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox