[U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23

[Marek Vasut <marex@denx.de>]

Dear Fabio Estevam,

[...]

> > @@ -574,8 +574,8 @@ static int mx28_create_sd_image(int infd, int outfd)
> > 
> >         cb->drv_info[0].chip_num = 0x0;
> >         cb->drv_info[0].drive_type = 0x0;
> >         cb->drv_info[0].tag = 0x1;
> > 
> > -       cb->drv_info[0].first_sector_number = sd_sector + 1;
> > -       cb->drv_info[0].sector_count = (size - 1) / 512;
> > +       cb->drv_info[0].first_sector_number = sd_sector + 4;
> > +       cb->drv_info[0].sector_count = (size - 4) / 512;
> > 
> >         wr_size = write(outfd, buf, size);
> >         if (wr_size != size) {
> 
> My mx28evk does not boot with this patch applied.

Can you add this section to arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd

-->8--
options {
       driveTag = 0x00;
       flags = 0x01;
}
--8<--

and paste the output you get on serial port? the flags = 1 should enable debug 
output from the bootrom.

Best regards,
Marek Vasut