From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Wed, 13 Feb 2013 15:35:51 +0100 Subject: [U-Boot] oxnas810 (eTrayz) u-Boot 1.1.2 usb support In-Reply-To: References: Message-ID: <201302131535.51212.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Frank van der Jagt, This question shall go to the ML. > Hi, > > I'm trying to get usb support going for eTrayz nas (oxnas810 device). > http://www.plxtech.com/products/consumer/oxe810dse > This device uses u-Boot 1.1.2 to boot from NOR flash. > > I have following questions: > > - Why hasn't the source of the oxnas810 drivers been published to the > u-Boot 1.1.2 tree. If I look there there are no drivers for the board in > the source tree. > Was PLX Tech not obliged to do so under the open source licence ? The source must be published under the terms of GPL, not commited upstream. > - Where can I get hold of the u-Boot 1.1.2 driver source for this device > and was usb support implemented for this board ? Ask your hardware vendor. > Thanks and rgds, > Frank Hunter > intraxit Best regards, Marek Vasut