From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 14 Feb 2013 17:27:22 +0100 Subject: [U-Boot] [PATCH v3 0/7] Move Tegra EHCI drive to correct place In-Reply-To: <1360257390-22899-1-git-send-email-dev@lynxeye.de> References: <1360257390-22899-1-git-send-email-dev@lynxeye.de> Message-ID: <201302141727.22809.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Lucas Stach, > This moves out the Tegra EHCI driver from a platform specific directory > to the standard driver/usb/host dir. > > This is a preparation needed to share this driver between Tegra20 and > Tegra30. No functional change in here, so Tegra30 is still not working. > > Patch 6 could be a lot smaller if it were generated with -B, as GIT would > detect that most of it is moving stuff over, but last time I did this it > prevented git apply to work. So sorry for the big diff. > > I think I incorporated all changes needed to reflect the review feedback > I got on this last time. > > V3 is rebased onto u-boot-tegra/next, fixes a build warning and has Simons > acked-by attached to the patches. > > I expect this series to go in through the Tegra tree. Marek, I suppose you > are OK with the series, as you already were about to apply them in V2 form, > please ACK so Tom can pick them up. > > Lucas Stach (7): > tegra: usb: set USB_PORTS_MAX to correct value > tegra: usb: make controller init functions more self contained > tegra: usb: remove unneeded function parameter > tegra: usb: move controller init into start_port > tegra: usb: various small cleanups > tegra: usb: move implementation into right directory > tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop] > > arch/arm/cpu/armv7/tegra20/Makefile | 1 - > arch/arm/cpu/armv7/tegra20/usb.c | 567 > ------------------------------ arch/arm/include/asm/arch-tegra/usb.h | > 249 +++++++++++++ > arch/arm/include/asm/arch-tegra20/tegra.h | 1 - > arch/arm/include/asm/arch-tegra20/usb.h | 271 -------------- > arch/arm/include/asm/arch-tegra30/tegra.h | 2 + > board/nvidia/common/board.c | 2 +- > drivers/usb/host/ehci-tegra.c | 546 > +++++++++++++++++++++++++++- 8 files changed, 782 insertions(+), 857 > deletions(-) > delete mode 100644 arch/arm/cpu/armv7/tegra20/usb.c > create mode 100644 arch/arm/include/asm/arch-tegra/usb.h > delete mode 100644 arch/arm/include/asm/arch-tegra20/usb.h These will go through the tegra tree, yes? Otherwise I'm fine with these patches. Best regards, Marek Vasut