From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Thu, 21 Feb 2013 22:53:38 +0100
Subject: [U-Boot] Please pull u-boot-ti/master
In-Reply-To: <20130219161405.GA7500@bill-the-cat>
References: <20130219161405.GA7500@bill-the-cat>
Message-ID: <20130221225338.62d595e6@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Tom,

On Tue, 19 Feb 2013 11:14:05 -0500, Tom Rini <trini@ti.com> wrote:

> Hello,
> 
> The following changes since commit 9f024f62e4604274a23213dcee30016092e32e7b:
> 
>   Merge branch 'fixes' of git://git.denx.de/u-boot-mips (2013-02-15 12:23:42 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://git.denx.de/u-boot-ti.git master
> 
> for you to fetch changes up to 4adfcd68cc10449e2fda0f9fac8b09f2b5c09a02:
> 
>   am335x evm: Add am335x_evm_spiboot target (2013-02-18 13:51:20 -0500)
> 
> ----------------------------------------------------------------
> Chase Maupin (3):
>       am335x_evm: Add NAND environment variables
>       am335x_evm: Add SPI environment variables
>       am335x_evm: Add NET environment variables
> 
> Enric Balletbo i Serra (3):
>       OMAP3: igep00x0: use official board names.
>       OMAP3: igep00x0: add missing include mach-types.h
>       OMAP3: igep00x0: Add new IGEP COM PROTON.
> 
> Howard Gray (1):
>       omap3: mvblx: change console to ttyO0 and make silent by default.
> 
> Ilya Yanok (4):
>       spl: support for booting via usbeth
>       am33xx: support for booting via usbeth
>       am335x_evm: enable support for booting via USB
>       doc/SPL/README.am335x-network: Document using ethernet (and USB) SPL
> 
> Lars Poeschel (1):
>       am33xx: pcm051: Remove wp pin mux for sd-card
> 
> Michael Jones (2):
>       omap3: mvblx: select fpgafilename according to orientation
>       omap3: mvblx: pass FPGA version to the kernel
> 
> Tom Rini (1):
>       am335x evm: Add am335x_evm_spiboot target
> 
> Tomas Novotny (2):
>       da8xx: ea20: Add the configuration define for the exact SoC variant
>       da8xx: Add the missing pinmux for da830 to the gpio driver
> 
> robertcnelson at gmail.com (2):
>       beagle: expansion boards: retry i2c_read with 16bit addressing
>       beagle: expansion boards: add LSR COM6L adapter
> 
>  MAINTAINERS                                  |    1 +
>  arch/arm/cpu/armv7/omap-common/boot-common.c |    3 +
>  arch/arm/include/asm/arch-am33xx/spl.h       |    1 +
>  arch/arm/include/asm/arch-davinci/gpio.h     |    4 +
>  board/isee/igep00x0/igep00x0.h               |    7 +-
>  board/matrix_vision/mvblx/fpga.c             |   14 ++-
>  board/matrix_vision/mvblx/sys_eeprom.c       |   24 +++++
>  board/phytec/pcm051/mux.c                    |    1 -
>  board/ti/am335x/board.c                      |   38 ++++----
>  board/ti/beagle/beagle.c                     |   14 +++
>  boards.cfg                                   |    2 +
>  common/spl/spl.c                             |    5 +
>  doc/SPL/README.am335x-network                |   92 ++++++++++++++++++
>  drivers/gpio/da8xx_gpio.c                    |  133 ++++++++++++++++++++++++++
>  include/configs/am335x_evm.h                 |   82 +++++++++++++++-
>  include/configs/ea20.h                       |    1 +
>  include/configs/igep00x0.h                   |    7 +-
>  include/configs/omap3_mvblx.h                |   25 +++--
>  spl/Makefile                                 |    2 +
>  19 files changed, 424 insertions(+), 32 deletions(-)
>  create mode 100644 doc/SPL/README.am335x-network
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.