From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 15 Mar 2013 17:11:28 -0400 Subject: [U-Boot] [PATCH 3/4] phy: add support for ET1011C phys In-Reply-To: <1363381100-6364-4-git-send-email-mporter@ti.com> References: <1363381100-6364-1-git-send-email-mporter@ti.com> <1363381100-6364-4-git-send-email-mporter@ti.com> Message-ID: <20130315211128.GB20201@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Mar 15, 2013 at 04:58:19PM -0400, Matt Porter wrote: > Adds an ET1011C PHY driver which is derived from > the current Linux kernel PHY driver. Note that an > errata workaround config option is implemented to > allow for TX_CLK to be enabled even when gigabit > mode is negotiated. This workaround is used on the > TI814x-EVM. You need to specify the git hash or tag, not just "current". The code itself is fine, so Reviewed-by: Tom Rini -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: