From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Thu, 21 Mar 2013 15:35:40 +0100
Subject: [U-Boot] [PATCH] Fix bootdelay timeout calculation when
	SYS_HZ!=1000
In-Reply-To: <514B1036.3090400@ti.com>
References: <1363842874-8286-1-git-send-email-swarren@wwwdotorg.org>
	<20130321065553.BC624200547@gemini.denx.de>
	<514B1036.3090400@ti.com>
Message-ID: <20130321143540.B01CF200547@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Tom,

In message <514B1036.3090400@ti.com> you wrote:
>
> > A system with CONFIG_SYS_HZ != 1000 is _broken_.
> 
> So, RPi is going higher, and Jon hit this on I suspect omap2420h4
> which is also higher (after mathing that all out).  If we no longer
> support CONFIG_SYS_HZ != 1000 we need to make that clear (and explain
> why).

It has never been supported, so this is not a case of "no longer".
There are several longish threads (about the timer code, especially
on ARM) in the archives.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The whole world is about three drinks behind."     - Humphrey Bogart