From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Fri, 22 Mar 2013 21:58:45 +0100 Subject: [U-Boot] [PATCH 21/21] powerpc/b4860qds: Slave module for boot from SRIO and PCIE In-Reply-To: <1363973052-25918-19-git-send-email-yorksun@freescale.com> References: <1363973052-25918-1-git-send-email-yorksun@freescale.com> <1363973052-25918-19-git-send-email-yorksun@freescale.com> Message-ID: <20130322205845.CD6D82014CE@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear York Sun, In message <1363973052-25918-19-git-send-email-yorksun@freescale.com> you wrote: > From: Liu Gang > > When boot from PCIE or SRIO, slave's core should be in holdoff after > powered on for some specific requirements. Master will release the > slave's core at the right time by PCIE or SRIO interface. > > Slave's ucode and ENV can be stored in master's memory space, then slave > can fetch them through PCIE or SRIO interface. ... CHECK: Alignment should match open parenthesis #180: FILE: board/freescale/b4860qds/tlb.c:61: + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, CHECK: Alignment should match open parenthesis #196: FILE: board/freescale/b4860qds/tlb.c:155: + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de In my experience the best way to get something done is to give it to someone who is busy. - Terry Pratchett, _Going_Postal_