* [U-Boot] [PULL] Please pull u-boot-atmel/master
2012-09-04 21:04 [U-Boot] =?true?q?=5BPULL=5D=20Please=20pull=20u-boot-atmel/master?= Andreas Bießmann
@ 2012-09-05 6:45 ` Albert ARIBAUD
0 siblings, 0 replies; 14+ messages in thread
From: Albert ARIBAUD @ 2012-09-05 6:45 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Tue, 4 Sep 2012 23:04:44 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> these are the missing patches for 2012.10 release. They where missed
> in the last request some days ago.
> At this time I did not rebase u-boot-atmel/master on
> u-boot-arm/master.
>
> The following changes since commit
> a9f1a4893364ddbb8b7942cded91d4c17c4f5948:
>
> lsxl: support power switch (2012-09-03 17:48:51 +0530)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to
> 7d899c14cc1842004e5f94a376082e7b6cf5988d:
>
> Fixes the crippled console output on PortuxG20. (2012-09-04
> 22:06:19 +0200)
>
> ----------------------------------------------------------------
> Jens Scharsig (2):
> eb_cpux9k2: fix chip select
> atmel: eb_cpux9k2: add ram target configuration
>
> Markus Hubig (2):
> arm: Adds board_postclk_init to the init_sequence.
> Fixes the crippled console output on PortuxG20.
>
> arch/arm/lib/board.c | 3 +++
> board/BuS/eb_cpux9k2/cpux9k2.c | 6 +++---
> board/taskit/stamp9g20/stamp9g20.c | 21 +++++++++++++++++----
> boards.cfg | 3 ++-
> include/configs/eb_cpux9k2.h | 7 ++++++-
> include/configs/stamp9g20.h | 1 +
> 6 files changed, 32 insertions(+), 9 deletions(-)
>
> Best regards
>
> Andreas Bie?mann
>
Applied (merged) to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
@ 2012-10-23 18:21 Andreas Bießmann
2012-10-26 7:58 ` Albert ARIBAUD
0 siblings, 1 reply; 14+ messages in thread
From: Andreas Bießmann @ 2012-10-23 18:21 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
The following changes since commit b9f4bc34ac0ee40f8d6a952036b4cd62b854aa74:
Remove lh7a40x cpu and serial driver (2012-10-16 18:00:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 9924ca6e9b1933b8ea2bb0ca49fe67df9856ccc5:
mmc: at91: use max timeout value. It will avoid some situation that timeout happened. (2012-10-17 11:29:52 +0200)
----------------------------------------------------------------
Wu, Josh (3):
mmc: at91: add multi block read/write support.
ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
mmc: at91: use max timeout value. It will avoid some situation that timeout happened.
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++
drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++--
include/atmel_mci.h | 7 ++++++-
include/configs/at91sam9x5ek.h | 10 ++++++++++
5 files changed, 54 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
2012-10-23 18:21 Andreas Bießmann
@ 2012-10-26 7:58 ` Albert ARIBAUD
0 siblings, 0 replies; 14+ messages in thread
From: Albert ARIBAUD @ 2012-10-26 7:58 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Tue, 23 Oct 2012 20:21:40 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> The following changes since commit b9f4bc34ac0ee40f8d6a952036b4cd62b854aa74:
>
> Remove lh7a40x cpu and serial driver (2012-10-16 18:00:36 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 9924ca6e9b1933b8ea2bb0ca49fe67df9856ccc5:
>
> mmc: at91: use max timeout value. It will avoid some situation that timeout happened. (2012-10-17 11:29:52 +0200)
>
> ----------------------------------------------------------------
> Wu, Josh (3):
> mmc: at91: add multi block read/write support.
> ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
> mmc: at91: use max timeout value. It will avoid some situation that timeout happened.
>
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++
> drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++--
> include/atmel_mci.h | 7 ++++++-
> include/configs/at91sam9x5ek.h | 10 ++++++++++
> 5 files changed, 54 insertions(+), 3 deletions(-)
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
@ 2012-11-05 10:19 Andreas Bießmann
2012-11-05 13:09 ` Albert ARIBAUD
0 siblings, 1 reply; 14+ messages in thread
From: Andreas Bießmann @ 2012-11-05 10:19 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
The following changes since commit 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 15915a45d438b9e65e03c3052c3dbab1374927bc:
at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board. (2012-11-05 11:15:12 +0100)
----------------------------------------------------------------
Bo Shen (1):
video: atmel: implement lcd_setcolreg funtion
Wu, Josh (1):
at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board.
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 12 ------------
arch/arm/cpu/arm926ejs/at91/cpu.c | 11 +++++++++++
arch/arm/include/asm/arch-at91/at91_dbu.h | 4 ++++
arch/arm/include/asm/arch-at91/at91sam9x5.h | 1 -
drivers/video/atmel_hlcdfb.c | 6 ++++++
5 files changed, 21 insertions(+), 13 deletions(-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
2012-11-05 10:19 [U-Boot] [PULL] please " Andreas Bießmann
@ 2012-11-05 13:09 ` Albert ARIBAUD
2012-11-06 9:19 ` Andreas Bießmann
0 siblings, 1 reply; 14+ messages in thread
From: Albert ARIBAUD @ 2012-11-05 13:09 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Mon, 5 Nov 2012 11:19:30 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> The following changes since commit 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
>
> socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 15915a45d438b9e65e03c3052c3dbab1374927bc:
>
> at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board. (2012-11-05 11:15:12 +0100)
>
> ----------------------------------------------------------------
> Bo Shen (1):
> video: atmel: implement lcd_setcolreg funtion
What is the point of adding this function? This does not seem to be a
strong override of a weak symbol, and therefore, it is dead code unless
this patch is a dependency of one or several other patches -- in which
case, please submit the other patch(es) along this one in your PR.
> Wu, Josh (1):
> at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board.
This one, despite being a cleaner rewrite, also seems to be a
preparatory patch waiting to be used.
The whole PR is dead/dormant code. Please resubmit when dependent
patches are added (or consider rolling back your master until you get
these dependent patches).
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
2012-11-05 13:09 ` Albert ARIBAUD
@ 2012-11-06 9:19 ` Andreas Bießmann
0 siblings, 0 replies; 14+ messages in thread
From: Andreas Bießmann @ 2012-11-06 9:19 UTC (permalink / raw)
To: u-boot
Hi Albert,
On 05.11.2012 14:09, Albert ARIBAUD wrote:
> Hi Andreas,
>
> On Mon, 5 Nov 2012 11:19:30 +0100, Andreas Bie?mann
> <andreas.devel@googlemail.com> wrote:
>
>> Dear Albert Aribaud,
>>
>> The following changes since commit 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
>>
>> socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-atmel.git master
>>
>> for you to fetch changes up to 15915a45d438b9e65e03c3052c3dbab1374927bc:
>>
>> at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board. (2012-11-05 11:15:12 +0100)
>>
>> ----------------------------------------------------------------
>> Bo Shen (1):
>> video: atmel: implement lcd_setcolreg funtion
>
> What is the point of adding this function? This does not seem to be a
> strong override of a weak symbol, and therefore, it is dead code unless
> this patch is a dependency of one or several other patches -- in which
> case, please submit the other patch(es) along this one in your PR.
This one is required for http://patchwork.ozlabs.org/patch/196566/ and
was explicitly requested in a private mail to Bo to support for getting
the RFC working
(http://article.gmane.org/gmane.comp.boot-loaders.u-boot/145434). So you
are right here, currently it is dead code and could maybe added to a series.
On the other hand the lcd_setcolreg() is exported via include/lcd.h but
not provided by the atmel_hlcd driver which is an error.
>> Wu, Josh (1):
>> at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board.
>
> This one, despite being a cleaner rewrite, also seems to be a
> preparatory patch waiting to be used.
Well, the get_*chip_id() are already used by some macros but only for a
single variant of at91. So you are right here when you call it
'preparatory', but it is not dead code as you may think.
> The whole PR is dead/dormant code. Please resubmit when dependent
> patches are added (or consider rolling back your master until you get
> these dependent patches).
However I rolled back the u-boot-atmel/master and will provide a series
for patch 1, patch 2 is so far NAKed until we get a user for that
reworked code.
Best regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-atmel/master
@ 2012-12-09 21:54 Andreas Bießmann
2013-01-09 19:03 ` Albert ARIBAUD
0 siblings, 1 reply; 14+ messages in thread
From: Andreas Bießmann @ 2012-12-09 21:54 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please consider the following board related changes for u-boot-arm/master.
The following changes since commit b8a7c467960ffb4d5a5e1eef5f7783fb6f594542:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2012-11-25 13:01:58 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to ac81e1ccf7135d8004763bbf9bef1d95a03fbe92:
spi: atmel: sam9m10g45 also support WDRBT bit (2012-12-09 22:40:13 +0100)
----------------------------------------------------------------
Bo Shen (1):
spi: atmel: sam9m10g45 also support WDRBT bit
Richard Genoud (3):
at91sam9x5: enable USB support for 9x5ek board.
at91sam9x5ek: regroup FAT/DOS features
at91sam9x5ek: add USB configuration
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 13 ++++++++++
arch/arm/include/asm/arch-at91/at91sam9x5.h | 2 ++
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 3 +++
drivers/spi/atmel_spi.c | 2 +-
drivers/usb/host/ohci-at91.c | 6 +++--
include/configs/at91sam9x5ek.h | 29 +++++++++++++++++++++-
6 files changed, 51 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] Please pull u-boot-atmel/master
2012-12-09 21:54 [U-Boot] [PULL] Please " Andreas Bießmann
@ 2013-01-09 19:03 ` Albert ARIBAUD
0 siblings, 0 replies; 14+ messages in thread
From: Albert ARIBAUD @ 2013-01-09 19:03 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Sun, 9 Dec 2012 22:54:09 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please consider the following board related changes for u-boot-arm/master.
>
> The following changes since commit b8a7c467960ffb4d5a5e1eef5f7783fb6f594542:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2012-11-25 13:01:58 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to ac81e1ccf7135d8004763bbf9bef1d95a03fbe92:
>
> spi: atmel: sam9m10g45 also support WDRBT bit (2012-12-09 22:40:13 +0100)
>
> ----------------------------------------------------------------
> Bo Shen (1):
> spi: atmel: sam9m10g45 also support WDRBT bit
>
> Richard Genoud (3):
> at91sam9x5: enable USB support for 9x5ek board.
> at91sam9x5ek: regroup FAT/DOS features
> at91sam9x5ek: add USB configuration
>
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 13 ++++++++++
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 2 ++
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 3 +++
> drivers/spi/atmel_spi.c | 2 +-
> drivers/usb/host/ohci-at91.c | 6 +++--
> include/configs/at91sam9x5ek.h | 29 +++++++++++++++++++++-
> 6 files changed, 51 insertions(+), 4 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
@ 2013-04-05 20:22 Andreas Bießmann
2013-04-05 20:53 ` Albert ARIBAUD
0 siblings, 1 reply; 14+ messages in thread
From: Andreas Bießmann @ 2013-04-05 20:22 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following late change into u-boot-arm/master. The other
pending patches where way after merge window close and will end up in next
branch these days.
The following changes since commit fed029f3c31b7d5df674b5090a13356b631918c7:
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2013-04-04 15:44:57 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 8bf3c322856f42d4db8acd7fa4f2a17898564064:
logo: update to the new logo for ATMEL (2013-04-05 21:49:37 +0200)
----------------------------------------------------------------
Josh Wu (1):
logo: update to the new logo for ATMEL
tools/logos/atmel.bmp | Bin 26334 -> 15478 bytes
1 file changed, 0 insertions(+), 0 deletions(-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
2013-04-05 20:22 [U-Boot] [PULL] please pull u-boot-atmel/master Andreas Bießmann
@ 2013-04-05 20:53 ` Albert ARIBAUD
0 siblings, 0 replies; 14+ messages in thread
From: Albert ARIBAUD @ 2013-04-05 20:53 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Fri, 5 Apr 2013 22:22:34 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following late change into u-boot-arm/master. The other
> pending patches where way after merge window close and will end up in next
> branch these days.
>
> The following changes since commit fed029f3c31b7d5df674b5090a13356b631918c7:
>
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2013-04-04 15:44:57 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 8bf3c322856f42d4db8acd7fa4f2a17898564064:
>
> logo: update to the new logo for ATMEL (2013-04-05 21:49:37 +0200)
>
> ----------------------------------------------------------------
> Josh Wu (1):
> logo: update to the new logo for ATMEL
>
> tools/logos/atmel.bmp | Bin 26334 -> 15478 bytes
> 1 file changed, 0 insertions(+), 0 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
@ 2013-05-12 15:01 Andreas Bießmann
2013-05-13 9:25 ` Albert ARIBAUD
0 siblings, 1 reply; 14+ messages in thread
From: Andreas Bießmann @ 2013-05-12 15:01 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11 22:24:28 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
----------------------------------------------------------------
Andreas Bie?mann (1):
at91sam9260ek: move board id setup to config header
Bo Shen (3):
spi: atmel_spi: using ip version to check whether has wdrbt
mmc: atmel_mci: using IP version for different setting
mmc: atmel_mci: add mmc card support
Wu, Josh (4):
arm: at91: add at91sam9n12 register definition
arm: at91: add at91sam9n12ek board support
arm: at91: enable mci support for at91sam9g20ek.
arm: at91: add at91sam9g20ek_mmc_config, which can save environment in mmc card
MAINTAINERS | 3 +
arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 177 +++++++++++++++
arch/arm/cpu/arm926ejs/at91/clock.c | 4 +-
arch/arm/include/asm/arch-at91/at91_common.h | 1 +
arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +-
arch/arm/include/asm/arch-at91/at91sam9x5.h | 19 +-
arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 17 +-
arch/arm/include/asm/arch-at91/hardware.h | 2 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 22 +-
board/atmel/at91sam9n12ek/Makefile | 52 +++++
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 228 +++++++++++++++++++
boards.cfg | 4 +
drivers/mmc/gen_atmel_mci.c | 47 +++-
drivers/spi/atmel_spi.c | 15 +-
drivers/spi/atmel_spi.h | 2 +-
include/atmel_mci.h | 2 +
include/configs/at91sam9260ek.h | 52 ++++-
include/configs/at91sam9n12ek.h | 232 ++++++++++++++++++++
20 files changed, 852 insertions(+), 34 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
create mode 100644 board/atmel/at91sam9n12ek/Makefile
create mode 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c
create mode 100644 include/configs/at91sam9n12ek.h
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
2013-05-12 15:01 Andreas Bießmann
@ 2013-05-13 9:25 ` Albert ARIBAUD
0 siblings, 0 replies; 14+ messages in thread
From: Albert ARIBAUD @ 2013-05-13 9:25 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Sun, 12 May 2013 17:01:39 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:
>
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11 22:24:28 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to d0a51373131c4ba565a2391d5ed78b87c406ce98:
>
> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (1):
> at91sam9260ek: move board id setup to config header
>
> Bo Shen (3):
> spi: atmel_spi: using ip version to check whether has wdrbt
> mmc: atmel_mci: using IP version for different setting
> mmc: atmel_mci: add mmc card support
>
> Wu, Josh (4):
> arm: at91: add at91sam9n12 register definition
> arm: at91: add at91sam9n12ek board support
> arm: at91: enable mci support for at91sam9g20ek.
> arm: at91: add at91sam9g20ek_mmc_config, which can save environment in mmc card
>
> MAINTAINERS | 3 +
> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 177 +++++++++++++++
> arch/arm/cpu/arm926ejs/at91/clock.c | 4 +-
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +-
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 19 +-
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 17 +-
> arch/arm/include/asm/arch-at91/hardware.h | 2 +-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 22 +-
> board/atmel/at91sam9n12ek/Makefile | 52 +++++
> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 228 +++++++++++++++++++
> boards.cfg | 4 +
> drivers/mmc/gen_atmel_mci.c | 47 +++-
> drivers/spi/atmel_spi.c | 15 +-
> drivers/spi/atmel_spi.h | 2 +-
> include/atmel_mci.h | 2 +
> include/configs/at91sam9260ek.h | 52 ++++-
> include/configs/at91sam9n12ek.h | 232 ++++++++++++++++++++
> 20 files changed, 852 insertions(+), 34 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
> create mode 100644 board/atmel/at91sam9n12ek/Makefile
> create mode 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c
> create mode 100644 include/configs/at91sam9n12ek.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
@ 2013-05-21 9:59 Andreas Bießmann
2013-05-22 9:59 ` Albert ARIBAUD
0 siblings, 1 reply; 14+ messages in thread
From: Andreas Bießmann @ 2013-05-21 9:59 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 5ba444f092ae9f68a0bd1f53956be2e69d26cf61:
ARM: at91: add NAND partition table and index (2013-05-21 11:54:21 +0200)
----------------------------------------------------------------
Bo Shen (6):
ARM: at91: add Atmel sama5d3 SoC new pmc register
USB: ohci-at91: support sama5d3x devices
ARM: atmel: add sama5d3xek support
ARM: at91: fix and update README.at91 document
ARM: at91: add at91sam9x5 and sama5d3x information
ARM: at91: add NAND partition table and index
MAINTAINERS | 1 +
arch/arm/cpu/armv7/at91/Makefile | 52 +++++
arch/arm/cpu/armv7/at91/clock.c | 125 ++++++++++++
arch/arm/cpu/armv7/at91/cpu.c | 90 +++++++++
arch/arm/cpu/armv7/at91/reset.c | 47 +++++
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 196 ++++++++++++++++++
arch/arm/cpu/armv7/at91/timer.c | 139 +++++++++++++
arch/arm/include/asm/arch-at91/at91_dbu.h | 4 +
arch/arm/include/asm/arch-at91/at91_pmc.h | 23 +++
arch/arm/include/asm/arch-at91/clk.h | 1 +
arch/arm/include/asm/arch-at91/hardware.h | 2 +
arch/arm/include/asm/arch-at91/sama5d3.h | 212 ++++++++++++++++++++
arch/arm/include/asm/arch-at91/sama5d3_smc.h | 79 ++++++++
board/atmel/sama5d3xek/Makefile | 51 +++++
board/atmel/sama5d3xek/sama5d3xek.c | 275 ++++++++++++++++++++++++++
boards.cfg | 3 +
doc/README.at91 | 84 ++++++--
drivers/usb/host/ohci-at91.c | 14 +-
include/configs/sama5d3xek.h | 245 +++++++++++++++++++++++
19 files changed, 1624 insertions(+), 19 deletions(-)
create mode 100644 arch/arm/cpu/armv7/at91/Makefile
create mode 100644 arch/arm/cpu/armv7/at91/clock.c
create mode 100644 arch/arm/cpu/armv7/at91/cpu.c
create mode 100644 arch/arm/cpu/armv7/at91/reset.c
create mode 100644 arch/arm/cpu/armv7/at91/sama5d3_devices.c
create mode 100644 arch/arm/cpu/armv7/at91/timer.c
create mode 100644 arch/arm/include/asm/arch-at91/sama5d3.h
create mode 100644 arch/arm/include/asm/arch-at91/sama5d3_smc.h
create mode 100644 board/atmel/sama5d3xek/Makefile
create mode 100644 board/atmel/sama5d3xek/sama5d3xek.c
create mode 100644 include/configs/sama5d3xek.h
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PULL] please pull u-boot-atmel/master
2013-05-21 9:59 Andreas Bießmann
@ 2013-05-22 9:59 ` Albert ARIBAUD
0 siblings, 0 replies; 14+ messages in thread
From: Albert ARIBAUD @ 2013-05-22 9:59 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Tue, 21 May 2013 11:59:26 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
>
> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 5ba444f092ae9f68a0bd1f53956be2e69d26cf61:
>
> ARM: at91: add NAND partition table and index (2013-05-21 11:54:21 +0200)
>
> ----------------------------------------------------------------
> Bo Shen (6):
> ARM: at91: add Atmel sama5d3 SoC new pmc register
> USB: ohci-at91: support sama5d3x devices
> ARM: atmel: add sama5d3xek support
> ARM: at91: fix and update README.at91 document
> ARM: at91: add at91sam9x5 and sama5d3x information
> ARM: at91: add NAND partition table and index
>
> MAINTAINERS | 1 +
> arch/arm/cpu/armv7/at91/Makefile | 52 +++++
> arch/arm/cpu/armv7/at91/clock.c | 125 ++++++++++++
> arch/arm/cpu/armv7/at91/cpu.c | 90 +++++++++
> arch/arm/cpu/armv7/at91/reset.c | 47 +++++
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 196 ++++++++++++++++++
> arch/arm/cpu/armv7/at91/timer.c | 139 +++++++++++++
> arch/arm/include/asm/arch-at91/at91_dbu.h | 4 +
> arch/arm/include/asm/arch-at91/at91_pmc.h | 23 +++
> arch/arm/include/asm/arch-at91/clk.h | 1 +
> arch/arm/include/asm/arch-at91/hardware.h | 2 +
> arch/arm/include/asm/arch-at91/sama5d3.h | 212 ++++++++++++++++++++
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 79 ++++++++
> board/atmel/sama5d3xek/Makefile | 51 +++++
> board/atmel/sama5d3xek/sama5d3xek.c | 275 ++++++++++++++++++++++++++
> boards.cfg | 3 +
> doc/README.at91 | 84 ++++++--
> drivers/usb/host/ohci-at91.c | 14 +-
> include/configs/sama5d3xek.h | 245 +++++++++++++++++++++++
> 19 files changed, 1624 insertions(+), 19 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/at91/Makefile
> create mode 100644 arch/arm/cpu/armv7/at91/clock.c
> create mode 100644 arch/arm/cpu/armv7/at91/cpu.c
> create mode 100644 arch/arm/cpu/armv7/at91/reset.c
> create mode 100644 arch/arm/cpu/armv7/at91/sama5d3_devices.c
> create mode 100644 arch/arm/cpu/armv7/at91/timer.c
> create mode 100644 arch/arm/include/asm/arch-at91/sama5d3.h
> create mode 100644 arch/arm/include/asm/arch-at91/sama5d3_smc.h
> create mode 100644 board/atmel/sama5d3xek/Makefile
> create mode 100644 board/atmel/sama5d3xek/sama5d3xek.c
> create mode 100644 include/configs/sama5d3xek.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-05-22 9:59 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-05 20:22 [U-Boot] [PULL] please pull u-boot-atmel/master Andreas Bießmann
2013-04-05 20:53 ` Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2013-05-21 9:59 Andreas Bießmann
2013-05-22 9:59 ` Albert ARIBAUD
2013-05-12 15:01 Andreas Bießmann
2013-05-13 9:25 ` Albert ARIBAUD
2012-12-09 21:54 [U-Boot] [PULL] Please " Andreas Bießmann
2013-01-09 19:03 ` Albert ARIBAUD
2012-11-05 10:19 [U-Boot] [PULL] please " Andreas Bießmann
2012-11-05 13:09 ` Albert ARIBAUD
2012-11-06 9:19 ` Andreas Bießmann
2012-10-23 18:21 Andreas Bießmann
2012-10-26 7:58 ` Albert ARIBAUD
2012-09-04 21:04 [U-Boot] =?true?q?=5BPULL=5D=20Please=20pull=20u-boot-atmel/master?= Andreas Bießmann
2012-09-05 6:45 ` [U-Boot] [PULL] Please pull u-boot-atmel/master Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox