[U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target

[Marek Vasut <marex@denx.de>]

Dear Beno?t Th?baudeau,

> Dear Marek Vasut,
> 
> On Friday, April 19, 2013 1:16:31 PM, Marek Vasut wrote:
> > Dear Beno?t Th?baudeau,
> > 
> > > Dear Marek Vasut,
> > > 
> > > On Friday, April 19, 2013 6:10:52 AM, Marek Vasut wrote:
> > > > This target is currently concatenating u-boot SPL in imximage format
> > > > with u-boot.bin. The NAND SPL can load a raw binary, but the
> > > > preffered format with much less limitations is uImage format. Fix
> > > > the target so u-boot.bin is first converted into uImage format and
> > > > only after that is concatenated.
> > > 
> > > Please reword: This is not a fix, but an enhancement.
> > > 
> > > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > > Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> > > > Cc: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> > > > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> > > > Cc: Scott Wood <scottwood@freescale.com>
> > > > Cc: Stefano Babic <sbabic@denx.de>
> > > > Cc: Tom Rini <trini@ti.com>
> > > > ---
> > > > 
> > > >  arch/arm/imx-common/Makefile | 7 +++++--
> > > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/arch/arm/imx-common/Makefile
> > > > b/arch/arm/imx-common/Makefile index 44b6822..ba31d3e 100644
> > > > --- a/arch/arm/imx-common/Makefile
> > > > +++ b/arch/arm/imx-common/Makefile
> > > > @@ -69,8 +69,11 @@ $(OBJTREE)/u-boot-with-nand-spl.imx:
> > > > $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
> > > > 
> > > >  		-I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
> > > >  		$(OBJTREE)/spl/u-boot-nand-spl-pad.imx
> > > >  	
> > > >  	rm $(OBJTREE)/spl/u-boot-nand-spl.imx
> > > > 
> > > > -	cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin 
>
> > > > $@ -	rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
> > > > +	$(OBJTREE)/tools/mkimage -A arm -O U-Boot -a
> > > > $(CONFIG_SYS_TEXT_BASE) \ +		-e $(CONFIG_SYS_TEXT_BASE) -C 
none -d
> > > > $(OBJTREE)/u-boot.bin \ +		$(OBJTREE)/u-boot.uim
> > > > +	cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim 
>
> > > > $@ +	rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim
> > > > 
> > > >  ####################################################################
> > > >  #### #
> > > > 
> > > > --
> > > > 1.7.11.7
> > > 
> > > This change is correct.
> > > 
> > > I don't know the uImage format very well. Can you give examples of what
> > > this patch can bring compared to the raw binary format?
> > > 
> > > If this change is useful, it should probably be made for
> > > u-boot-with-spl.imx too.
> > 
> > Please see common/spl/spl_nand.c which calls spl_parse_image_header() on
> > the payload loaded from NAND. This is implemented in common/spl/spl.c
> > and if proper
> > header is not found, the payload is assumed to be of 200kB of size, which
> > is far
> > less than fully configured U-Boot.
> 
> Or you could #define CONFIG_SYS_MONITOR_LEN to what you need.

YUCK!

> > So using the uimage format is much more
> > flexible.
> 
> I agree.
> 
> So I'd see the following changes for this patch:
>  - Reword "fix" to show enhancement, and detail the flexibility rationale
> in the description.
>  - Extend to u-boot-with-spl.imx.

Ok.

Tom, shall we merge this one into current release after it's fixed?