[U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board

[U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board

[Igor Ferrara]

Hi,
I have a Freescale SabreSD board with an i.MX6 quad-core processor.
I'm using u-boot-2009.08 (released with Freescale's LTIB)
I would like to enable both LVDS channels.
In the "lcd_enable" func (file: /
board/freescale/mx6q_sabresd/mx6q_sabresd.c) I properly changed some
registers following the advice of Freescale but I could not enable the
second channel:
https://community.freescale.com/docs/DOC-93617
Furthermore, the "ipuv3_fb_init" func is used to initialize a single
Display Interface.
Can you give me some advice to enable both channels?
Thanks for any help,
 
Igor
 

Distinti saluti
Best regards

Igor Ferrara
________________________________________________

         

DOT SYSTEM S.r.l.
Via Marco Biagi, 34
23871 Lomagna (LC)

Tel.: ++39 039-92259 218
Fax.: ++39 039-92259 290 / 229

P.I. (VAT):   02250660137
C.F.:           10222170150

igor.ferrara at dotsystem.it <mailto:igor.ferrara@dotsystem.it> 

http://www.dotsystem.it <http://www.dotsystem.it/> 
http://www.dotsystem.eu <http://www.dotsystem.eu/> 
http://www.flex-rail.com <http://www.flex-rail.com/> 
http://www.railways-dna.com <http://www.railways-dna.com/> 
http://www.imagesafety-eye.com <http://www.imagesafety-eye.com/> 

mappa
<http://maps.google.it/maps?q=Dot+System+via+marco+biagi+34,+lomagna,+lc
&hl=it&ll=45.658478,9.374428&spn=0.010738,0.01442&sll=45.658473,9.374322
&sspn=0.011443,0.019248&t=h&hq=Dot+System&hnear=Via+Marco+Biagi,+Lomagna
,+Lecco,+Lombardia&z=16&iwloc=A> 
map
<http://maps.google.it/maps?q=Dot+System+via+marco+biagi+34,+lomagna,+lc
&hl=it&ll=45.658478,9.374428&spn=0.010738,0.01442&sll=45.658473,9.374322
&sspn=0.011443,0.019248&t=h&hq=Dot+System&hnear=Via+Marco+Biagi,+Lomagna
,+Lecco,+Lombardia&z=16&iwloc=A> 

________________________________________________



Please confirm the reception of the present message  by sending back an
answer message  Thank You for the cooperation.


Note related to the privacy: This message and the possible attached
files, contains reserved informations and it is intended to be used only
by the addressee(s) under his (their) responsibility. Thank You

Following the coming into effect of legislative decree of 8 June 2001,
n. 231, which introduced for the first time the concept of
"administrative responsibility" for companies. The updating process was
carried out in conformity with the content of legislative decree 231/01,
the guidelines drawn up by Confindustria as well as specific measures
already implemented by the Dot System concerning both internal control
and corporate governance. The mailbox to communicate, also in anonymous
form, with components of the supervisory is  
organodivigilanza at dotsystem.it <mailto:organodivigilanza@dotsystem.it> 

 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 7284 bytes
Desc: Logo Certificazione IRIS Dot System Firma E-Mail.JPG
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130426/515689fb/attachment.jpeg>

[U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board

[Eric Bénard]

Hi Igor,

Le Fri, 26 Apr 2013 17:17:54 +0200,
"Igor Ferrara" <Igor.Ferrara@dotsystem.it> a ?crit :
> Please confirm the reception of the present message  by sending back an
> answer message  Thank You for the cooperation.
> 
this list has 2535 subscribers, do you really need to get 2535 answers
each time tou send an email here ? ;-)

Eric

[U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board

[Igor Ferrara]

Hi Eric,
I'm very sorry. I made a mistake. It will not happen again.

Igor


-----Messaggio originale-----
Da: Eric B?nard [mailto:eric at eukrea.com]
Inviato: ven 26/04/2013 18.22
A: Igor Ferrara
Cc: u-boot at lists.denx.de
Oggetto: Re: [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
 
Hi Igor,

Le Fri, 26 Apr 2013 17:17:54 +0200,
"Igor Ferrara" <Igor.Ferrara@dotsystem.it> a ?crit :
> Please confirm the reception of the present message  by sending back an
> answer message  Thank You for the cooperation.
> 
this list has 2535 subscribers, do you really need to get 2535 answers
each time tou send an email here ? ;-)

Eric

[U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board

[Fabio Estevam]

Hi Igor,

On Fri, Apr 26, 2013 at 12:17 PM, Igor Ferrara
<Igor.Ferrara@dotsystem.it> wrote:
> Hi,
> I have a Freescale SabreSD board with an i.MX6 quad-core processor.
> I'm using u-boot-2009.08 (released with Freescale's LTIB)

This list is about the official U-boot project, not the 2009.08 port from FSL.

> I would like to enable both LVDS channels.

In mainline U-boot there is support for one LVDS panel in mx6qsabrelite board.

You can use it as reference and add LVDS panel support in mx6qsabresd.

Please send us the patches.

> In the "lcd_enable" func (file: /
> board/freescale/mx6q_sabresd/mx6q_sabresd.c) I properly changed some
> registers following the advice of Freescale but I could not enable the
> second channel:
> https://community.freescale.com/docs/DOC-93617
> Furthermore, the "ipuv3_fb_init" func is used to initialize a single
> Display Interface.
> Can you give me some advice to enable both channels?

What is exactly your use case? Do you really need dual display support
in U-boot?

Can't you just boot fast and use the dual display support that kernel
already provides?

Regards,

Fabio Estevam

[U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board

[Igor Ferrara]

Hi Fabio,
Sorry for not replying sooner.
I want to enable two LVDS channels because I noticed that the kernel
does not "seem" to initialize properly them if they are not initialized
before by the bootloader.
I'm also trying to understand the reason for this behavior.

Igor



Hi Igor,

On Fri, Apr 26, 2013 at 12:17 PM, Igor Ferrara
<Igor.Ferrara@dotsystem.it> wrote:
> Hi,
> I have a Freescale SabreSD board with an i.MX6 quad-core processor.
> I'm using u-boot-2009.08 (released with Freescale's LTIB)

This list is about the official U-boot project, not the 2009.08 port
from FSL.

> I would like to enable both LVDS channels.

In mainline U-boot there is support for one LVDS panel in mx6qsabrelite
board.

You can use it as reference and add LVDS panel support in mx6qsabresd.

Please send us the patches.

> In the "lcd_enable" func (file: /
> board/freescale/mx6q_sabresd/mx6q_sabresd.c) I properly changed some 
> registers following the advice of Freescale but I could not enable the

> second channel:
> https://community.freescale.com/docs/DOC-93617
> Furthermore, the "ipuv3_fb_init" func is used to initialize a single 
> Display Interface.
> Can you give me some advice to enable both channels?

What is exactly your use case? Do you really need dual display support
in U-boot?

Can't you just boot fast and use the dual display support that kernel
already provides?

Regards,

Fabio Estevam