From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Fri, 26 Apr 2013 23:11:26 +0200
Subject: [U-Boot] [PATCH] mx23: Put back RAM voltage level to its
	original value
In-Reply-To: <CAOMZO5DHHjhQj3NoheZ=E4nKaj0yMRjLY-5Q3HCyPEC4CrbMmg@mail.gmail.com>
References: <1366992090-4331-1-git-send-email-festevam@gmail.com>
	<201304262021.29403.marex@denx.de>
	<CAOMZO5DHHjhQj3NoheZ=E4nKaj0yMRjLY-5Q3HCyPEC4CrbMmg@mail.gmail.com>
Message-ID: <201304262311.26725.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,

> On Fri, Apr 26, 2013 at 3:21 PM, Marek Vasut <marex@denx.de> wrote:
> > Yes you have, extract ELDK 5.3 for armv5te from
> > ftp://ftp.denx.de/pub/eldk/ on SD card (use for example rootfs-qte-sdk)
> > and all the tools are readily there. Just grab kernel source, run make
> > mxs_defconfig ; make -j 2 and wait overnight. If it crashes, we still
> > have problem.
> 
> Right, but without this patch I can not even boot a kernel on mx23evk,
> how would I be able to natively build one? ;-)

Boot the kernel with this patch and then use ELDK to do the testing please.

Best regards,
Marek Vasut