From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Fri, 26 Apr 2013 23:14:22 +0200
Subject: [U-Boot] [PATCH] mx23: Put back RAM voltage level to its
	original value
In-Reply-To: <CAOMZO5BCW-O1vgBGuK5VpT-EajoU4u03TGEykVF=Y+0FJpkDMA@mail.gmail.com>
References: <1366992090-4331-1-git-send-email-festevam@gmail.com>
	<201304262256.35729.marex@denx.de>
	<CAOMZO5BCW-O1vgBGuK5VpT-EajoU4u03TGEykVF=Y+0FJpkDMA@mail.gmail.com>
Message-ID: <201304262314.22250.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,

> On Fri, Apr 26, 2013 at 5:56 PM, Marek Vasut <marex@denx.de> wrote:
> >> Why 1.5V? The VDDMEM reset value is 1.7V.
> > 
> > Some voltage drop, that's no problem.
> 
> Well, 100mV does all the difference on my test.

Yes, I get it, I'm just worried we're just putting a plaster on another one, not 
fixing the _real_ issue.

> > I'd say try one more thing -- use a different PSU. I suspect the
> > powerblock on olinuxino is cheap crap and the stability of the DRAM
> > depends on the PSU too. After that, yes, we can have it in.
> 
> I am not running on olinuxino.

The freescale powerblock should be ok, yes.

Best regards,
Marek Vasut