From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Mon, 29 Apr 2013 01:19:08 +0200
Subject: [U-Boot] [PATCH] mx23: Put back RAM voltage level to its
	original value
In-Reply-To: <201304290106.57433.marex@denx.de>
References: <1366992090-4331-1-git-send-email-festevam@gmail.com>
	<201304290106.57433.marex@denx.de>
Message-ID: <201304290119.08768.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,
> 
> > From: Fabio Estevam <fabio.estevam@freescale.com>
> > 
> > commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR
> > voltage level, which causes mx23evk to fail to load a kernel.
> > 
> > Put back the original values, so that mx23evk can boot a kernel again.
> > 
> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> 
> So, here are the results from M28EVK and MX23EVK:
> 
> http://twilight.ponies.cz/MX23.tar.xz
> http://twilight.ponies.cz/MX28.tar.xz
> 
> What you can see (rather what's wrong on MX23):
> - VDDA should be 1V5, but jumps over 2V and stabilizes at 1V7
> - VDDIO has some weird ripple where it goes to 3V5
> - VDDMEM is FUBAR

Ah btw this is stock 2013.04

Best regards,
Marek Vasut