From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 2 May 2013 03:44:32 +0200
Subject: [U-Boot] [PATCH 2/9] mx23: regs-pinctrl.h: Add pinctrl support
	for mx23
In-Reply-To: <CAOMZO5C7tLuLFpe6gAqeAiLM7MXn-QSt2O9mEZfMkgB51kXy+w@mail.gmail.com>
References: <1367444689-31301-1-git-send-email-festevam@gmail.com>
	<201305020213.07276.marex@denx.de>
	<CAOMZO5C7tLuLFpe6gAqeAiLM7MXn-QSt2O9mEZfMkgB51kXy+w@mail.gmail.com>
Message-ID: <201305020344.32393.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,

> On Wed, May 1, 2013 at 9:13 PM, Marek Vasut <marex@denx.de> wrote:
> > How come? Doesn't the board/...mx23.../spl_boot.c use that? Or iomux.c in
> > FSL's parlance.
> 
> I meant mxs_pinctrl_regs structure is only referenced for mx28 currently:
> 
> #ifdef CONFIG_MX28
> static void mx28_mem_init(void)
> {
> 	struct mxs_pinctrl_regs *pinctrl_regs =
> 		(struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE;
> 
> 	/* Set DDR2 mode */
> 	writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
> 		&pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);

Ah! Good point, sorry for the prodding then.

Best regards,
Marek Vasut