From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path
Date: Sun, 5 May 2013 23:27:22 +0200 [thread overview]
Message-ID: <201305052327.22227.marex@denx.de> (raw)
In-Reply-To: <1367194729-9962-1-git-send-email-marex@denx.de>
Hi Stefano,
this one too ;-)
> The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise
> they have issues with out-of-tree build where elftosb tool couldn't
> sometimes find the u-boot.bin and spl/u-boot-spl.bin .
>
> Preprocess these .bd files with sed and insert full path to u-boot.bin and
> spl/u-boot-spl.bin to prevent this issue. Moreover, to avoid adding more
> churn into main Makefile, move all this preprocessing and u-boot.sb
> generation into CPU directory instead.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> .gitignore | 1 +
> Makefile | 7 ++-----
> arch/arm/cpu/arm926ejs/mxs/Makefile | 10 ++++++++++
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 ++--
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 ++--
> 5 files changed, 17 insertions(+), 9 deletions(-)
>
> V2: Add .gitignore entry
>
> diff --git a/.gitignore b/.gitignore
> index ed21203..c79d577 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -46,6 +46,7 @@
> /u-boot.ais
> /u-boot.dtb
> /u-boot.sb
> +/u-boot.bd
> /u-boot.geany
>
> #
> diff --git a/Makefile b/Makefile
> index 3fd6d15..1874456 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -512,13 +512,9 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin
> $(obj)u-boot.img cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
> $(obj)u-boot.ais
>
> -# Specify the target for use in elftosb call
> -ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
> -ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
>
> $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
> - elftosb -zf $(ELFTOSB_TARGET-y) -c
> $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \ -
-o
> $(obj)u-boot.sb
> + $(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
>
> # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
> # Both images are created using mkimage (crc etc), so that the ROM
> @@ -849,6 +845,7 @@ clobber: tidy
> @rm -f $(obj)u-boot.ais
> @rm -f $(obj)u-boot.dtb
> @rm -f $(obj)u-boot.sb
> + @rm -f $(obj)u-boot.bd
> @rm -f $(obj)u-boot.spr
> @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
> @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
> diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile
> b/arch/arm/cpu/arm926ejs/mxs/Makefile index eeecf89..038c1c1 100644
> --- a/arch/arm/cpu/arm926ejs/mxs/Makefile
> +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile
> @@ -40,6 +40,16 @@ all: $(obj).depend $(LIB)
> $(LIB): $(OBJS)
> $(call cmd_link_o_target, $(OBJS))
>
> +# Specify the target for use in elftosb call
> +ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
> +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
> +
> +$(OBJTREE)/u-boot.bd:
> $(SRCTREE)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd + sed
> "s at OBJTREE@$(OBJTREE)@g" $^ > $@
> +
> +$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin
> $(OBJTREE)/u-boot.bd + elftosb -zf $(ELFTOSB_TARGET-y) -c
> $(OBJTREE)/u-boot.bd -o $(OBJTREE)/u-boot.sb +
> #########################################################################
>
> # defines $(obj).depend target
> diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
> b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd index 3a51879..8b6c30e 100644
> --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
> +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
> @@ -4,8 +4,8 @@ options {
> }
>
> sources {
> - u_boot_spl="spl/u-boot-spl.bin";
> - u_boot="u-boot.bin";
> + u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
> + u_boot="OBJTREE/u-boot.bin";
> }
>
> section (0) {
> diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
> b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd index c60615a..a5fa648 100644
> --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
> +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd
> @@ -1,6 +1,6 @@
> sources {
> - u_boot_spl="spl/u-boot-spl.bin";
> - u_boot="u-boot.bin";
> + u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
> + u_boot="OBJTREE/u-boot.bin";
> }
>
> section (0) {
Best regards,
Marek Vasut
prev parent reply other threads:[~2013-05-05 21:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-29 0:18 [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path Marek Vasut
2013-04-29 1:03 ` Otavio Salvador
2013-05-05 21:27 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201305052327.22227.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox