* [U-Boot] [PULL] u-boot-pxa.git/master
@ 2013-05-06 1:11 Marek Vasut
2013-05-06 12:27 ` Tom Rini
2013-05-11 6:14 ` Albert ARIBAUD
0 siblings, 2 replies; 4+ messages in thread
From: Marek Vasut @ 2013-05-06 1:11 UTC (permalink / raw)
To: u-boot
The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47:
P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git master
for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2:
h2200: Add board reset support (2013-05-05 23:47:05 +0200)
----------------------------------------------------------------
Mike Dunn (5):
lib: import bitrev library from the linux kernel
pxa_lcd: add the ACX544AKN lcd device
pxa_lcd: make lcd_enable() a weak pointer
pxa27x_udc: remove call to unimplemented set_GPIO_mode()
mtd: nand: add driver for diskonchip g4 nand flash
?ukasz Da?ek (2):
pxa: Add weak attribute to reset_cpu() function
h2200: Add board reset support
arch/arm/cpu/pxa/pxa2xx.c | 2 +-
arch/arm/include/asm/arch-pxa/hardware.h | 11 --
board/h2200/h2200.c | 9 ++
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/docg4.c | 1028
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/docg4_spl.c | 222 ++++++++++++++++++++++++++++
drivers/usb/gadget/pxa27x_udc.c | 4 +-
drivers/video/pxa_lcd.c | 34 ++++-
include/linux/bitrev.h | 23 +++
include/linux/mtd/docg4.h | 134 +++++++++++++++++
lib/Makefile | 1 +
lib/bitrev.c | 59 ++++++++
12 files changed, 1515 insertions(+), 14 deletions(-)
create mode 100644 drivers/mtd/nand/docg4.c
create mode 100644 drivers/mtd/nand/docg4_spl.c
create mode 100644 include/linux/bitrev.h
create mode 100644 include/linux/mtd/docg4.h
create mode 100644 lib/bitrev.c
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PULL] u-boot-pxa.git/master
2013-05-06 1:11 [U-Boot] [PULL] u-boot-pxa.git/master Marek Vasut
@ 2013-05-06 12:27 ` Tom Rini
2013-05-06 12:59 ` Marek Vasut
2013-05-11 6:14 ` Albert ARIBAUD
1 sibling, 1 reply; 4+ messages in thread
From: Tom Rini @ 2013-05-06 12:27 UTC (permalink / raw)
To: u-boot
On Mon, May 06, 2013 at 03:11:44AM +0200, Marek Vasut wrote:
> The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47:
>
> P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-pxa.git master
>
> for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2:
>
> h2200: Add board reset support (2013-05-05 23:47:05 +0200)
>
> ----------------------------------------------------------------
> Mike Dunn (5):
> lib: import bitrev library from the linux kernel
> pxa_lcd: add the ACX544AKN lcd device
> pxa_lcd: make lcd_enable() a weak pointer
> pxa27x_udc: remove call to unimplemented set_GPIO_mode()
> mtd: nand: add driver for diskonchip g4 nand flash
>
> ??ukasz Da??ek (2):
> pxa: Add weak attribute to reset_cpu() function
> h2200: Add board reset support
>
> arch/arm/cpu/pxa/pxa2xx.c | 2 +-
> arch/arm/include/asm/arch-pxa/hardware.h | 11 --
> board/h2200/h2200.c | 9 ++
> drivers/mtd/nand/Makefile | 2 +
> drivers/mtd/nand/docg4.c | 1028
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mtd/nand/docg4_spl.c | 222 ++++++++++++++++++++++++++++
> drivers/usb/gadget/pxa27x_udc.c | 4 +-
> drivers/video/pxa_lcd.c | 34 ++++-
> include/linux/bitrev.h | 23 +++
> include/linux/mtd/docg4.h | 134 +++++++++++++++++
> lib/Makefile | 1 +
> lib/bitrev.c | 59 ++++++++
> 12 files changed, 1515 insertions(+), 14 deletions(-)
> create mode 100644 drivers/mtd/nand/docg4.c
> create mode 100644 drivers/mtd/nand/docg4_spl.c
> create mode 100644 include/linux/bitrev.h
> create mode 100644 include/linux/mtd/docg4.h
> create mode 100644 lib/bitrev.c
Ahem, this is for Albert :)
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130506/6380a7ad/attachment.pgp>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PULL] u-boot-pxa.git/master
2013-05-06 12:27 ` Tom Rini
@ 2013-05-06 12:59 ` Marek Vasut
0 siblings, 0 replies; 4+ messages in thread
From: Marek Vasut @ 2013-05-06 12:59 UTC (permalink / raw)
To: u-boot
Dear Tom Rini,
> On Mon, May 06, 2013 at 03:11:44AM +0200, Marek Vasut wrote:
> > The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47:
> > P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400)
> >
> > are available in the git repository at:
> > git://git.denx.de/u-boot-pxa.git master
> >
> > for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2:
> > h2200: Add board reset support (2013-05-05 23:47:05 +0200)
> >
> > ----------------------------------------------------------------
> >
> > Mike Dunn (5):
> > lib: import bitrev library from the linux kernel
> > pxa_lcd: add the ACX544AKN lcd device
> > pxa_lcd: make lcd_enable() a weak pointer
> > pxa27x_udc: remove call to unimplemented set_GPIO_mode()
> > mtd: nand: add driver for diskonchip g4 nand flash
> >
> > ??ukasz Da??ek (2):
> > pxa: Add weak attribute to reset_cpu() function
> > h2200: Add board reset support
> >
> > arch/arm/cpu/pxa/pxa2xx.c | 2 +-
> > arch/arm/include/asm/arch-pxa/hardware.h | 11 --
> > board/h2200/h2200.c | 9 ++
> > drivers/mtd/nand/Makefile | 2 +
> > drivers/mtd/nand/docg4.c | 1028
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >
> > drivers/mtd/nand/docg4_spl.c | 222
> > ++++++++++++++++++++++++++++ drivers/usb/gadget/pxa27x_udc.c |
> > 4 +-
> > drivers/video/pxa_lcd.c | 34 ++++-
> > include/linux/bitrev.h | 23 +++
> > include/linux/mtd/docg4.h | 134 +++++++++++++++++
> > lib/Makefile | 1 +
> > lib/bitrev.c | 59 ++++++++
> > 12 files changed, 1515 insertions(+), 14 deletions(-)
> > create mode 100644 drivers/mtd/nand/docg4.c
> > create mode 100644 drivers/mtd/nand/docg4_spl.c
> > create mode 100644 include/linux/bitrev.h
> > create mode 100644 include/linux/mtd/docg4.h
> > create mode 100644 lib/bitrev.c
>
> Ahem, this is for Albert :)
Yes it is, my bad.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PULL] u-boot-pxa.git/master
2013-05-06 1:11 [U-Boot] [PULL] u-boot-pxa.git/master Marek Vasut
2013-05-06 12:27 ` Tom Rini
@ 2013-05-11 6:14 ` Albert ARIBAUD
1 sibling, 0 replies; 4+ messages in thread
From: Albert ARIBAUD @ 2013-05-11 6:14 UTC (permalink / raw)
To: u-boot
Hi Marek,
On Mon, 6 May 2013 03:11:44 +0200, Marek Vasut <marex@denx.de> wrote:
> The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47:
>
> P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-pxa.git master
>
> for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2:
>
> h2200: Add board reset support (2013-05-05 23:47:05 +0200)
>
> ----------------------------------------------------------------
> Mike Dunn (5):
> lib: import bitrev library from the linux kernel
> pxa_lcd: add the ACX544AKN lcd device
> pxa_lcd: make lcd_enable() a weak pointer
> pxa27x_udc: remove call to unimplemented set_GPIO_mode()
> mtd: nand: add driver for diskonchip g4 nand flash
>
> ?ukasz Da?ek (2):
> pxa: Add weak attribute to reset_cpu() function
> h2200: Add board reset support
>
> arch/arm/cpu/pxa/pxa2xx.c | 2 +-
> arch/arm/include/asm/arch-pxa/hardware.h | 11 --
> board/h2200/h2200.c | 9 ++
> drivers/mtd/nand/Makefile | 2 +
> drivers/mtd/nand/docg4.c | 1028
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mtd/nand/docg4_spl.c | 222 ++++++++++++++++++++++++++++
> drivers/usb/gadget/pxa27x_udc.c | 4 +-
> drivers/video/pxa_lcd.c | 34 ++++-
> include/linux/bitrev.h | 23 +++
> include/linux/mtd/docg4.h | 134 +++++++++++++++++
> lib/Makefile | 1 +
> lib/bitrev.c | 59 ++++++++
> 12 files changed, 1515 insertions(+), 14 deletions(-)
> create mode 100644 drivers/mtd/nand/docg4.c
> create mode 100644 drivers/mtd/nand/docg4_spl.c
> create mode 100644 include/linux/bitrev.h
> create mode 100644 include/linux/mtd/docg4.h
> create mode 100644 lib/bitrev.c
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-05-11 6:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-06 1:11 [U-Boot] [PULL] u-boot-pxa.git/master Marek Vasut
2013-05-06 12:27 ` Tom Rini
2013-05-06 12:59 ` Marek Vasut
2013-05-11 6:14 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox