From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Sat, 11 May 2013 01:19:00 +0200
Subject: [U-Boot] [PATCH 3/3] video: mxsfb: Add an entry for
	mx23evk/mx28vk video modes
In-Reply-To: <1368213258-23811-3-git-send-email-festevam@gmail.com>
References: <1368213258-23811-1-git-send-email-festevam@gmail.com>
	<1368213258-23811-3-git-send-email-festevam@gmail.com>
Message-ID: <201305110119.01044.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Fabio Estevam,

> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Currently the mxsfb driver takes the display timings from the 'videomode'
> environment variable.
> 
> Provide an example on how to set 'videomode' for using splash screen on
> mx23evk and mx28vk boards.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  drivers/video/mxsfb.c |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
> index 461ff6e..b189419 100644
> --- a/drivers/video/mxsfb.c
> +++ b/drivers/video/mxsfb.c
> @@ -39,6 +39,11 @@ static GraphicDevice panel;
>   * setenv videomode
>   * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
>   *       le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
> + *
> + * Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel:
> + * setenv videomode
> + * video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851,
> + * 	 le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
>   */

On SCH-26062 Rev B the image is shifted downwards on MX23EVK, but maybe that's 
not SEIKO LCD ;-)

Otherwise for MX23EVK,

Tested-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut