[U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT

[Tom Rini <trini@ti.com>]

On Tue, May 14, 2013 at 03:52:04AM +0000, Zhang Ying-B40530 wrote:

> -----Original Message-----
> From: Tom Rini [mailto:tom.rini at gmail.com] On Behalf Of Tom Rini
> Sent: Tuesday, May 14, 2013 6:13 AM
> To: Zhang Ying-B40530
> Cc: u-boot at lists.denx.de; Wood Scott-B07421; Xie Xiaobo-R63061; Zhang Ying-B40530
> Subject: Re: [U-Boot] [PATCH v2] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT
> 
> On Mon, May 13, 2013 at 03:07:57PM +0800, ying.zhang at freescale.com wrote:
> 
> > From: Ying Zhang <b40530@freescale.com>
> > 
> > There will need the environment in SPL for reasons other than network
> > support (in particular, hwconfig contains info for how to set up DDR).
> > 
> > Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT in
> > common/Makefile.
> [snip]
> > --- a/common/Makefile
> > +++ b/common/Makefile
> > @@ -44,7 +44,6 @@ COBJS-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o
> >  COBJS-y += cmd_boot.o
> >  COBJS-$(CONFIG_CMD_BOOTM) += cmd_bootm.o
> >  COBJS-y += cmd_help.o
> > -COBJS-y += cmd_nvedit.o
> >  COBJS-y += cmd_version.o
> >  
> >  # environment
> > @@ -67,7 +66,6 @@ COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o
> >  COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
> >  COBJS-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
> >  COBJS-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
> > -COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
> >  
> >  # command
> >  COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
> > @@ -214,18 +212,16 @@ COBJS-$(CONFIG_CMD_GPT) += cmd_gpt.o
> >  endif
> >  
> >  ifdef CONFIG_SPL_BUILD
> > -COBJS-y += cmd_nvedit.o
> > -COBJS-y += env_common.o
> >  COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
> >  COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
> > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
> > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_attr.o
> > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_callback.o
> > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
> > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_flags.o
> > -COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
> >  COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
> > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_common.o
> > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
> > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
> > +COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
> >  endif
> > +COBJS-y += cmd_nvedit.o
> > +COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
> >  COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
> >  COBJS-y += console.o
> >  COBJS-y += dlmalloc.o
> 
> Just move the whole CONFIG_ENV_IS_IN.. section down to where we always
> build objects, and update the comments in the Makefile in both spots.
> [Zhang Ying] 
> For common lines(for example: cmd_nvedit.o) that shared by the SPL and non-SPL, 
> can we move it to public area? So, we can avoid excessive SPL symbols.


Right.  Re-order things so we're duplicating as little as possible.
There's already a bit of needless duplication going on here.

> And a3m071 needs to be updated for CONFIG_SPL_ENV_SUPPORT too.  Thanks!
> [Zhang Ying] 
> In include/configs/a3m071.h, there was no CONFIG_SPL_NET_SUPPORT to be defined.
>  Are you sure to add CONFIG_SPL_ENV_SUPPORT for it?

Yes, it uses the environment as part of CONFIG_SPL_OS support rather
than CONFIG_SPL_NET_SUPPORT.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130514/c648ae43/attachment.pgp>