From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michael Trimarchi <michael@amarulasolutions.com>
Date: Thu, 16 May 2013 15:19:26 +0200
Subject: [U-Boot] ulpi patch in uboot
In-Reply-To: <5194B63F.2040205@denx.de>
References: <5194AA1B.40201@amarulasolutions.com>
 <5194B63F.2040205@denx.de>
Message-ID: <20130516131926.GA10690@panicking>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi

On Thu, May 16, 2013 at 12:34:39PM +0200, Stefano Babic wrote:
> On 16/05/2013 11:42, Michael Trimarchi wrote:
> > Hi a;;,
> > 
> 
> Hi Michael,
> 
> (I posted also to u-boot ML to check if someone else had issues)
> 
> > I think that this patch could be wrong for omap4 and omap3. The opcode shift
> > shuld be 22 and not 21. And are you sure that are you using the bit 31
> > in the correct way?
> > 
> > Stefano, are you sure about your testing?
> 
> Well, it happened more as one year ago, but I tested again this morning
> with the AM3517 I used for testing, using a version 2013.04-rc1
> 
> twister => usb start
> (Re)start USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 3 USB Device(s) found
>        scanning usb for storage devices... 1 Storage Device(s) found
> twister => fatls usb 0
>             .disk/
>