From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Thu, 16 May 2013 16:25:53 +0200
Subject: [U-Boot] Booting u-boot for versatile in qemu fails
In-Reply-To: <5194CF92.7060705@wanadoo.fr>
References: <5194CF92.7060705@wanadoo.fr>
Message-ID: <20130516162553.5dc6195d@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Thierry,

On Thu, 16 May 2013 14:22:42 +0200, Thierry Bultel
<thierry.bultel@wanadoo.fr> wrote:

> Hi,
> 
> I am trying to use u-boot configured for uboot_versatileqemu in 
> qemu-system-arm.
> 
> I only get a black screen a no serial output at all.
> I have tested several versions, and taken latest u-boot from 
> git://git.denx.de
> 
> I have also upgraded qemu to 1.5.0-rc2
> 
> My command line is as follows:
> 
> qemu-system-arm -M versatilepb -m 128M -kernel u-boot.bin -serial stdio
> 
> 
> I have configured u-boot like that:
> make CROSS_COMPILE=arm-linux-gnueabihf- versatileqemu_config
> 
> My compiler is:
> #arm-linux-gnueabihf-gcc --version
> arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.10-20121022 
> - Linaro GCC 2012.10) 4.7.3 20121001 (prerelease)
> 
> I also tried the ca9x4_ct_vxp, because I often use vexpress kernels in 
> qemu for vexpress-a9, but no better success
> 
> Is there a configuration that is known to work ?

At least I know that versatileqemu on current u-boot-arm/master with
wemu-system-arm v1.2.0 works, with command line

	qemu-system-arm -M versatilepb -m 128M -serial stdio -kernel
	u-boot -display none

And I just tested without '-display none', and still get the serial
prompt and U-Boot commands working.

> Best regards
> Thierry

Amicalement,
-- 
Albert.