[U-Boot] [PATCH v2 4/4] arm: factorize relocate_code routine

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

On Thu, 16 May 2013 16:52:38 +0200, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:

> Hi Beno?t,
> 
> On Thu, 16 May 2013 16:28:55 +0200 (CEST), Beno?t Th?baudeau
> <benoit.thebaudeau@advansee.com> wrote:
> 
> > Hi Albert,
> > 
> > On Thursday, May 16, 2013 4:29:49 PM, Albert ARIBAUD wrote:
> > > Hi Beno?t,
> > > 
> > > On Wed, 15 May 2013 19:55:31 +0200, Albert ARIBAUD
> > > <albert.u.boot@aribaud.net> wrote:
> > > 
> > > > Hi Beno?t,
> > > > 
> > > > On Wed, 15 May 2013 18:36:05 +0200 (CEST), Beno?t Th?baudeau
> > > > <benoit.thebaudeau@advansee.com> wrote:
> > > > 
> > > > > Hi Albert,
> > > > > 
> > > > > On Wednesday, May 15, 2013 10:30:00 AM, Albert ARIBAUD wrote:
> > > > > > On Wed, 15 May 2013 09:31:37 +0200, Albert ARIBAUD
> > > > > > <albert.u.boot@aribaud.net> wrote:
> > > > > > 
> > > > > > > Then I should add =relocate_code to r3, not =_start, and also -- as
> > > > > > > r9
> > > > > > > is not the right offset here -- compute r7 as the delta between the
> > > > > > > link-time =_start and the run-time relocate_code (r7 becomes useless
> > > > > > > once R10, r2 and r3 are fixed).
> > > > > > 
> > > > > > I badly need a coffee break... Make this "r7 equal to =relocate_code",
> > > > > > simply.
> > > > > 
> > > > > Or "adr r7, relocate_code" for the same result in order to avoid using
> > > > > the
> > > > > literal pool when useless.
> > > > 
> > > > Correct. That'll be in v3.
> > > 
> > > Sorry, I missed this change in V3 and left the ldr. Functionally it
> > > does not have any impact, since as already mentioned, this code always
> > > runs at the link-time location. You may want Want me to fix it anyway?
> > 
> > I have not yet looked at your V3, but yes, I'd prefer.
> 
> Alright, then, V4 it is.

Hmm -- I'd actually made the ldr to adr fix in V3, so no V4 for now, V3
is fine.

Amicalement,
-- 
Albert.