[U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support

[Nishanth Menon <nm@ti.com>]

Hi Andrii,
We are almost there.. minor comments follow:
On 11:42-20130521, Andrii Tseglytskyi wrote:
[...]
> diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c
> new file mode 100644
> index 0000000..92470be
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/omap5/abb.c
> @@ -0,0 +1,67 @@
I might introduce this as part of patch #2... but no strong feelings
about it.
[...]
> +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
> +{
> +	u32 vset;
> +
> +	/*
> +	 * ABB parameters must be properly fused
> +	 * otherwise ABB should be disabled
> +	 */
> +	vset = readl(fuse);
> +	if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
> +		return -1;
> +
> +	/* prepare VSET value for LDOVBB mux register */
> +	vset &= OMAP5_ABB_FUSE_VSET_MASK;
> +	vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
> +	vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
> +	vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
> +
> +	/* setup LDOVBB using fused value */
> +	clrsetbits_le32(ldovbb,  OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK wont get set :(
[...]

Other than this, I have no further comments.
-- 
Regards,
Nishanth Menon