From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anatolij Gustschin Date: Wed, 5 Jun 2013 23:35:51 +0200 Subject: [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree In-Reply-To: <1369715478-3655-1-git-send-email-swarren@wwwdotorg.org> References: <1369715478-3655-1-git-send-email-swarren@wwwdotorg.org> Message-ID: <20130605233551.389f447c@crub> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, 27 May 2013 22:31:17 -0600 Stephen Warren wrote: > simple-framebuffer is a new device tree binding that describes a pre- > configured frame-buffer memory region and its format. The Linux kernel > contains a driver that supports this binding. Implement functions to > create a DT node (or fill in an existing node) with parameters that > describe the framebuffer format that U-Boot is using. > > This will be immediately used by the Raspberry Pi board in U-Boot, and > likely will be used by the Samsung ARM ChromeBook support soon too. It > could well be used by many other boards (e.g. Tegra boards with built-in > LCD panels, which aren't yet supported by the Linux kernel). > > Signed-off-by: Stephen Warren > Acked-by: Simon Glass > --- > v2: Add binding doc, remove ifdefs from lcd.h > --- > common/lcd.c | 87 ++++++++++++++++++++ > .../video/simple-framebuffer.txt | 25 ++++++ > include/lcd.h | 3 + > 3 files changed, 115 insertions(+) > create mode 100644 doc/device-tree-bindings/video/simple-framebuffer.txt Applied to u-boot-video/master. Thanks! Anatolij