From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Tue, 18 Jun 2013 16:57:39 +0200
Subject: [U-Boot] please pull u-boot-samsung master
In-Reply-To: <CAD6G_RTiEix_rJXbOQKNLdWqPy50rUnbofiHT-R2oz1hVfoUOg@mail.gmail.com>
References: <51BE7032.9010802@samsung.com>
	<CAD6G_RTiEix_rJXbOQKNLdWqPy50rUnbofiHT-R2oz1hVfoUOg@mail.gmail.com>
Message-ID: <20130618165739.6880a9e0@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Minkyu,

On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki
<jagannadh.teki@gmail.com> wrote:

> On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote:
> > Dear Albert,
> >
> > The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
> >
> >   at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
> >
> > are available in the git repository at:
> >
> >   git://git.denx.de/u-boot-samsung master
> >
> > for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
> >
> >   MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
> >
> > ----------------------------------------------------------------
> > Akshay Saraswat (2):
> >       Exynos5: clock: Update the equation to calculate PLL output frequency
> >       Exynos: uart: s5p: enabling the uart tx/rx fifo
> >
> > Amar (9):
> >       FDT: Add compatible string for DWMMC
> >       EXYNOS5: FDT: Add DWMMC device node data
> >       DWMMC: Initialise dwmci and resolve EMMC read write issues
> >       EXYNOS5: DWMMC: Added FDT support for DWMMC
> >       EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
> >       SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
> >       MMC: APIs to support resize of EMMC boot partition
> >       SMDK5250: Enable EMMC booting
> >       COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
> >
> > Arkadiusz Wlodarczyk (1):
> >       arm:trats: change auto-booting to boot kernel with separate device tree blob
> >
> > Inderpal Singh (3):
> >       exynos: move tzpc_init to armv7/exynos
> >       exynos: update tzpc to make it common for exynos4 and exynos5
> >       exynos: Update origen and smdkv310 to use common tzpc_init
> >
> > Naveen Krishna Chatradhi (2):
> >       power: exynos-tmu: fix warnings and clean up code
> >       power: exynos-tmu: use the mux_addr bit fields in tmu_control register
> >
> > Rajeshwari Shinde (3):
> >       SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
> >       SMDK5250: Enable SPI Gigabyte device.
> 
> SPI gigabyte flash driver is not available in drivers/mtd/spi/
> Am i missing anything here, please help.

So, Minkyu, should I pick this PR or wait for an update?

Amicalement,
-- 
Albert.