From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx.git
Date: Tue, 25 Jun 2013 10:56:09 -0400 [thread overview]
Message-ID: <20130625145609.GE28078@bill-the-cat> (raw)
In-Reply-To: <1371847897-11934-1-git-send-email-afleming@freescale.com>
On Fri, Jun 21, 2013 at 03:51:37PM -0500, Andy Fleming wrote:
> The following changes since commit 7315cfd9e1922ee1c3c5f016e5a3b16199122172:
>
> NET: Fix system hanging if NET device is not installed (2013-06-19 08:32:44 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-mpc85xx.git master
>
> for you to fetch changes up to 5707233880090f785c33df32c04549ea1aeef61e:
>
> powerpc/85xx: Add P1023RDB board support (2013-06-20 17:08:53 -0500)
>
> ----------------------------------------------------------------
> Andy Fleming (2):
> 85xx: Change clock-frequency compatible to 2.0
> 85xx: Change case of MPC85XX_PORBMSR_ROMLOC_SHIFT
>
> Axel Lin (1):
> powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE
>
> Chris Packham (1):
> powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
>
> Chunhe Lan (1):
> powerpc/85xx: Add P1023RDB board support
>
> Fabio Estevam (1):
> powerpc: Use lower case for the core names
>
> Liu Gang (6):
> powerpc/doc: Update the README.srio-pcie-boot-corenet
> powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
> powerpc/b4860qds: Enable master module for boot from SRIO and PCIE
> powerpc/b4860qds: Slave module for boot from SRIO and PCIE
> powerpc/t4qds: Enable master module for Boot from SRIO and PCIE
> powerpc/t4qds: Slave module for boot from SRIO and PCIE
>
> Mingkai Hu (2):
> powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
> fsl_ifc: add support for different IFC bank count
>
> Prabhakar Kushwaha (9):
> powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
> powerpc/mpc85xx: new SPL support for IFC NAND
> board/p1010rdb:Add NAND boot support using new SPL format
> board/bsc9131rdb:Add NAND boot support using new SPL format
> board/bsc9132qds:Add NAND boot support using new SPL format
> powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL
> board/b4860qds: Relax NOR flash teadc timing parameter
> board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define
> powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
>
> Priyanka Jain (3):
> board/bsc9131rdb: Add targets for Sysclk 100MHz
> board/bsc9131rdb: Add DSP side tlb and laws
> board/bsc9131rdb: Update default boot environment settings
>
> Scott Wood (1):
> powerpc/mpc85xx: work around erratum A-006593
>
> Ying Zhang (4):
> powerpc/mpc85xx: support application without resetvec segment in the linker script
> powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
> common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
> Makefile: move the common makefile line to public area
>
> York Sun (2):
> powerpc/BSC9132: Add IFC bank count
> powerpc/pixis: Fix pixis help message
>
> README | 27 ++
> arch/powerpc/cpu/mpc85xx/Makefile | 1 +
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 10 +-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 5 +-
> arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 10 +-
> arch/powerpc/cpu/mpc85xx/fdt.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p1022_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p2041_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p3041_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p5040_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/start.S | 2 +-
> arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 18 +-
> arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 +
> arch/powerpc/cpu/mpc86xx/cpu.c | 2 +-
> arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c | 4 +-
> arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c | 4 +-
> arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 60 ++-
> arch/powerpc/cpu/mpc8xxx/srio.c | 4 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 13 +-
> arch/powerpc/include/asm/fsl_ifc.h | 95 +++--
> arch/powerpc/include/asm/fsl_law.h | 5 +
> arch/powerpc/include/asm/immap_85xx.h | 4 +-
> board/freescale/b4860qds/tlb.c | 19 +
> board/freescale/bsc9131rdb/Makefile | 16 +
> board/freescale/bsc9131rdb/README | 18 +-
> board/freescale/bsc9131rdb/law.c | 4 +
> board/freescale/bsc9131rdb/spl_minimal.c | 118 ++++++
> board/freescale/bsc9131rdb/tlb.c | 17 +-
> board/freescale/bsc9132qds/Makefile | 17 +
> board/freescale/bsc9132qds/bsc9132qds.c | 4 +-
> board/freescale/bsc9132qds/law.c | 6 +-
> board/freescale/bsc9132qds/spl_minimal.c | 130 +++++++
> board/freescale/bsc9132qds/tlb.c | 27 +-
> board/freescale/common/Makefile | 10 +
> board/freescale/common/pixis.c | 2 +
> board/freescale/p1010rdb/Makefile | 16 +
> .../freescale/p1010rdb/spl_minimal.c | 20 +-
> board/freescale/p1010rdb/tlb.c | 13 +-
> board/freescale/p1023rdb/Makefile | 33 ++
> board/freescale/p1023rdb/ddr.c | 105 +++++
> board/freescale/p1023rdb/law.c | 34 ++
> board/freescale/p1023rdb/p1023rdb.c | 161 ++++++++
> board/freescale/p1023rdb/tlb.c | 115 ++++++
> board/freescale/t4qds/tlb.c | 19 +
> boards.cfg | 8 +
> common/Makefile | 44 ++-
> doc/README.srio-pcie-boot-corenet | 34 +-
> drivers/mtd/nand/Makefile | 1 +
> .../mtd/nand/fsl_ifc_spl.c | 37 +-
> drivers/pci/fsl_pci_init.c | 6 +-
> include/configs/B4860QDS.h | 35 +-
> include/configs/BSC9131RDB.h | 62 ++-
> include/configs/BSC9132QDS.h | 63 ++-
> include/configs/P1010RDB.h | 77 ++--
> include/configs/P1023RDB.h | 401 ++++++++++++++++++++
> include/configs/P2041RDB.h | 1 +
> include/configs/P3041DS.h | 2 +-
> include/configs/P4080DS.h | 2 +-
> include/configs/P5020DS.h | 2 +-
> include/configs/a3m071.h | 1 +
> include/configs/am335x_evm.h | 1 +
> include/configs/pcm051.h | 1 +
> include/configs/t4qds.h | 35 +-
> lib/Makefile | 14 +-
> nand_spl/board/freescale/p1010rdb/Makefile | 142 -------
> tools/pblimage.c | 32 +-
> 80 files changed, 1831 insertions(+), 393 deletions(-)
> create mode 100644 board/freescale/bsc9131rdb/spl_minimal.c
> create mode 100644 board/freescale/bsc9132qds/spl_minimal.c
> rename nand_spl/board/freescale/p1010rdb/nand_boot.c => board/freescale/p1010rdb/spl_minimal.c (95%)
> create mode 100644 board/freescale/p1023rdb/Makefile
> create mode 100644 board/freescale/p1023rdb/ddr.c
> create mode 100644 board/freescale/p1023rdb/law.c
> create mode 100644 board/freescale/p1023rdb/p1023rdb.c
> create mode 100644 board/freescale/p1023rdb/tlb.c
> rename nand_spl/nand_boot_fsl_ifc.c => drivers/mtd/nand/fsl_ifc_spl.c (88%)
> create mode 100644 include/configs/P1023RDB.h
> delete mode 100644 nand_spl/board/freescale/p1010rdb/Makefile
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130625/22009f90/attachment.pgp>
next prev parent reply other threads:[~2013-06-25 14:56 UTC|newest]
Thread overview: 172+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 20:51 [U-Boot] Please pull u-boot-mpc85xx.git Andy Fleming
2013-06-24 20:17 ` Tom Rini
2013-06-25 14:56 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-07-16 23:30 Andy Fleming
2013-07-17 14:38 ` Tom Rini
2013-07-17 14:39 ` Tom Rini
2013-05-24 22:17 Andy Fleming
2013-05-25 18:40 ` Tom Rini
2013-05-09 22:20 Andy Fleming
2013-05-10 15:23 ` Tom Rini
2013-05-10 16:13 ` Fleming Andy-AFLEMING
2013-05-02 23:15 Andy Fleming
2013-05-03 13:32 ` Tom Rini
2013-05-03 23:05 ` Fleming Andy-AFLEMING
2013-01-30 17:34 Andy Fleming
2013-01-30 23:17 ` Tom Rini
2013-01-30 23:23 ` Andy Fleming
2013-01-25 16:45 Andy Fleming
2013-01-25 22:09 ` Tom Rini
2013-01-25 22:15 ` Fleming Andy-AFLEMING
2013-01-25 22:42 ` Tom Rini
2012-11-28 7:39 Andy Fleming
2012-11-28 13:04 ` Tom Rini
2012-11-28 13:47 ` Tom Rini
2012-11-29 13:38 ` Tom Rini
2012-12-03 19:33 ` Tabi Timur-B04825
2012-10-22 22:36 Andy Fleming
2012-10-23 1:23 ` Tabi Timur-B04825
2012-10-23 2:46 ` Fleming Andy-AFLEMING
2012-10-23 16:20 ` Timur Tabi
2012-10-23 2:53 ` Tom Rini
2012-10-23 23:04 ` Tom Rini
2012-10-23 23:08 ` Andy Fleming
2012-08-09 0:22 Andy Fleming
2012-08-09 19:07 ` Wolfgang Denk
2012-07-06 22:32 Andy Fleming
2012-07-08 17:25 ` Wolfgang Denk
[not found] <1329349202-22464-1-git-send-email-afleming@freescale.com>
2012-02-17 22:54 ` Wolfgang Denk
2011-04-10 16:20 Kumar Gala
2011-04-10 19:31 ` Wolfgang Denk
[not found] <alpine.LFD.2.00.1104040913320.20731@right.am.freescale.net >
2011-04-05 6:59 ` Fabian Cenedese
2011-04-04 14:14 Kumar Gala
2011-04-04 17:48 ` Timur Tabi
2011-04-04 18:20 ` Kumar Gala
2011-04-04 18:26 ` Scott Wood
2011-04-04 18:27 ` Timur Tabi
2011-04-04 19:42 ` Wolfgang Denk
2011-04-04 19:54 ` Timur Tabi
2011-04-04 19:55 ` Scott Wood
2011-04-04 20:58 ` Wolfgang Denk
2011-04-05 3:21 ` Kumar Gala
2011-04-05 14:24 ` Jerry Van Baren
2011-04-05 10:26 ` Wolfgang Denk
2011-03-28 14:06 Kumar Gala
2011-03-23 5:22 Kumar Gala
2011-03-24 20:18 ` Wolfgang Denk
2011-03-24 21:03 ` Kumar Gala
2011-03-15 6:37 Kumar Gala
2011-03-21 20:34 ` Wolfgang Denk
2011-03-14 5:37 Kumar Gala
2011-03-14 19:29 ` Wolfgang Denk
2011-01-18 4:45 [U-Boot] (no subject) Kumar Gala
2011-01-18 9:39 ` [U-Boot] Please pull u-boot-mpc85xx.git Kumar Gala
2011-01-14 7:51 Kumar Gala
2011-01-17 19:32 ` Wolfgang Denk
2010-12-18 0:18 Kumar Gala
2010-12-18 13:15 ` Wolfgang Denk
2010-12-18 15:26 ` Kumar Gala
2010-12-18 21:27 ` Wolfgang Denk
2010-12-21 17:50 ` Kumar Gala
2010-12-13 15:44 Kumar Gala
2010-12-01 19:01 Kumar Gala
2010-12-06 22:41 ` Wolfgang Denk
2010-11-11 7:06 Kumar Gala
2010-10-22 8:11 Kumar Gala
2010-10-23 20:05 ` Wolfgang Denk
2010-10-20 7:43 Kumar Gala
2010-10-20 19:17 ` Wolfgang Denk
2010-10-07 16:17 Kumar Gala
2010-10-11 7:59 ` Wolfgang Denk
2010-08-31 16:26 Kumar Gala
2010-09-07 19:18 ` Wolfgang Denk
2010-08-19 7:10 Kumar Gala
2010-08-01 15:51 Kumar Gala
2010-08-02 13:20 ` Timur Tabi
2010-08-02 14:57 ` Wolfgang Denk
2010-08-02 15:25 ` Timur Tabi
2010-08-02 20:54 ` Wolfgang Denk
2010-08-02 20:58 ` Timur Tabi
2010-08-02 21:06 ` Wolfgang Denk
2010-08-02 21:11 ` Timur Tabi
2010-08-02 18:31 ` Ben Warren
2010-08-02 19:32 ` Kumar Gala
2010-08-02 21:08 ` Wolfgang Denk
2010-08-02 21:10 ` Ben Warren
2010-08-03 22:31 ` Wolfgang Denk
2010-07-21 5:45 Kumar Gala
2010-07-21 16:26 ` Kim Phillips
2010-07-21 20:14 ` Kumar Gala
2010-07-24 18:33 ` Wolfgang Denk
2010-05-30 16:16 Kumar Gala
2010-05-30 19:45 ` Wolfgang Denk
2010-05-31 17:33 ` Kumar Gala
2010-06-01 18:38 ` Kim Phillips
2010-06-01 19:22 ` Kumar Gala
2010-05-12 9:58 Kumar Gala
2010-05-17 21:14 ` Wolfgang Denk
2009-09-30 13:45 Kumar Gala
2009-09-30 21:40 ` Wolfgang Denk
2009-07-06 15:13 Kumar Gala
2009-07-07 18:54 ` Wolfgang Denk
2009-06-04 4:54 Andy Fleming
2009-06-04 8:53 ` Wolfgang Denk
2009-06-09 20:59 ` Wolfgang Denk
2009-04-04 15:33 Kumar Gala
2009-04-04 18:05 ` Wolfgang Denk
2009-04-01 20:15 Kumar Gala
2009-03-30 18:36 Kumar Gala
2009-03-26 22:53 Andy Fleming
2009-03-27 19:21 ` Wolfgang Denk
2009-03-10 19:12 Andy Fleming
2009-03-10 21:09 ` Wolfgang Denk
2009-02-17 0:13 Andy Fleming
2009-02-17 0:22 ` Wolfgang Denk
2009-01-23 23:30 Andy Fleming
2009-01-24 1:20 ` Wolfgang Denk
2009-01-28 8:33 ` Wolfgang Denk
2009-01-28 14:36 ` Haiying Wang
2009-01-28 14:38 ` Kumar Gala
2009-01-28 8:55 ` Wolfgang Denk
2009-01-28 9:07 ` Stefan Roese
2009-01-28 11:12 ` Wolfgang Denk
2009-01-28 12:02 ` Stefan Roese
2009-01-28 14:27 ` Kumar Gala
2009-01-13 23:01 Andy Fleming
2009-01-13 23:36 ` Wolfgang Denk
2008-12-29 18:58 Andy Fleming
2008-12-22 19:36 Andy Fleming
2008-12-23 0:08 ` Peter Tyser
2008-12-23 0:31 ` Andy Fleming
2008-12-23 16:16 ` Peter Tyser
2008-12-30 22:36 ` Wolfgang Denk
2008-12-04 19:08 Andy Fleming
2008-12-04 23:21 ` Wolfgang Denk
2008-10-27 22:32 Andy Fleming
2008-10-27 22:51 ` Wolfgang Denk
2008-10-24 22:47 Andy Fleming
2008-10-27 21:32 ` Wolfgang Denk
[not found] <1224273000-4303-1-git-send-email-afleming@freescale.com>
2008-10-17 20:02 ` Wolfgang Denk
2008-10-17 20:01 Andy Fleming
2008-10-17 20:14 ` Wolfgang Denk
2008-10-17 20:36 ` Kumar Gala
2008-10-17 20:42 ` Wolfgang Denk
2008-10-17 20:54 ` Wolfgang Denk
2008-10-14 22:43 Andy Fleming
2008-10-15 9:31 ` Wolfgang Denk
2008-10-15 14:09 ` Kumar Gala
2008-10-09 18:26 Andy Fleming
2008-10-12 21:14 ` Wolfgang Denk
2008-10-08 19:23 Andy Fleming
2008-10-12 21:12 ` Wolfgang Denk
2008-09-16 16:35 Andy Fleming
2008-09-21 20:36 ` Wolfgang Denk
2008-09-09 22:27 Andy Fleming
2008-09-10 9:08 ` Wolfgang Denk
2008-09-09 1:52 Andy Fleming
2008-09-09 8:17 ` Wolfgang Denk
2008-09-09 20:15 ` Kumar Gala
2008-09-09 20:58 ` Andy Fleming
2008-08-27 16:55 Andy Fleming
2008-08-27 22:35 ` Wolfgang Denk
2008-09-01 13:57 ` Detlev Zundel
2008-09-08 21:31 ` Andy Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130625145609.GE28078@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox