[U-Boot] [PATCH v2 3/4] LaCie/common: Fix cloudbox ethernet leds

[Simon Guinot <simon.guinot@sequanux.org>]

On Sun, Jun 30, 2013 at 12:12:28PM +0200, Fr?d?ric Leroy wrote:
> The cloudbox device have a different ethernet phy setup than other ns2
> devices. We get initialization value from the GPL LaCie source
> 
> Signed-off-by: Fr?d?ric Leroy <fredo@starox.org>
> ---
>  board/LaCie/common/common.c | 13 ++++++++++---
>  include/configs/lacie_kw.h  |  5 +++++
>  2 files changed, 15 insertions(+), 3 deletions(-)

Acked-by: Simon Guinot <simon.guinot@sequanux.org>

> 
> diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c
> index a62bf9f..85480e7 100644
> --- a/board/LaCie/common/common.c
> +++ b/board/LaCie/common/common.c
> @@ -21,6 +21,12 @@
>  #define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
>  #define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
>  
> +#if !defined(MII_MARVELL_LED_REG)
> +# define MII_MARVELL_LED_REG 16
> +# define MII_MARVELL_LED_MASK 0xf0
> +# define MII_MARVELL_LED_VALUE 0x0f
> +#endif
> +
>  void mv_phy_88e1116_init(const char *name, u16 phyaddr)
>  {
>  	u16 reg;
> @@ -53,9 +59,10 @@ void mv_phy_88e1318_init(const char *name, u16 phyaddr)
>  	 * Set control mode 4 for LED[0].
>  	 */
>  	miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3);
> -	miiphy_read(name, phyaddr, 16, &reg);
> -	reg |= 0xf;
> -	miiphy_write(name, phyaddr, 16, reg);
> +	miiphy_read(name, phyaddr, MII_MARVELL_LED_REG, &reg);
> +	reg &= MII_MARVELL_LED_MASK;
> +	reg |= MII_MARVELL_LED_VALUE;
> +	miiphy_write(name, phyaddr, MII_MARVELL_LED_REG, reg);
>  
>  	/*
>  	 * Enable RGMII delay on Tx and Rx for CPU port
> diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
> index fe27bbe..02e0882 100644
> --- a/include/configs/lacie_kw.h
> +++ b/include/configs/lacie_kw.h
> @@ -138,6 +138,11 @@
>  #ifdef CONFIG_CMD_NET
>  #define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
>  #define CONFIG_NETCONSOLE
> +#if defined(CONFIG_CLOUDBOX)
> +# define MII_MARVELL_LED_REG 17
> +# define MII_MARVELL_LED_MASK 0xffc0
> +# define MII_MARVELL_LED_VALUE 0x15
> +#endif
>  #endif
>  
>  /*
> -- 
> 1.8.1.2
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130701/37aef6c6/attachment.pgp>