public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Sughosh Ganu <urwithsughosh@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it
Date: Wed, 10 Jul 2013 15:35:10 +0530	[thread overview]
Message-ID: <20130710100510.GB2450@Hardy> (raw)
In-Reply-To: <20130709102813.63de0b18@lilith>

hi Albert,

On Tue Jul 09, 2013 at 10:28:13AM +0200, Albert ARIBAUD wrote:

> > > The arm926ej-s data cache does not have a single fixed policy, and
> > > does not have a bypass-on-write policy, only write-through and
> > > copy-back.
> > > 
> > > Other, more complex, policies may be defined, but at the MMU, not cache,
> > > level, and those are not constant for all arm926ej-s based SoCs; not
> > > even constant for a given SoC as they are configurable at run-time to
> > > fit the chosen system addressing map.
> > 
> > Can you please elucidate on these policies. Based on my reading of the
> > arm developers manual and the arm926ejs trm, the mmu makes a
> > particular region cacheable and/or write bufferable. I did not find
> > mention of any other  policies. Maybe pointers or links to the
> > documents would help.
> 
> You are correct re the other policies of the DDI0198E (ARM926EJ-S
> TRM) MMU -- page 3-11, bits 3-2 of the section descriptor. Note however
> that you may have to refer to your specific SoC's TRM or equivalent, as
> the SoC designer may have defined its own system-level cache and MMU
> architecture.
> 
> Note in any case that none of the policies mentioned in DDI0198E is
> described as read-allocate (let alone "read-allocate only" where writes
> would bypass the enabled cache); on the contrary, the only cache
> policies mentioned are write-through and write-back, both of which
> contradict cache bypass on write.

I was referring to the cache allocation policy mentioned in section
4.1 in the DDI0198E document -- this is also mentioned in table 12.1
in chapter 12 of the arm developers guide.

> > > (Besides, bypassing the cache for writes and not reads is of little
> > > interest for plain DDR caching.)
> > 
> > Again, afaik this is independent of the target interface that is being
> > cached(if i've missed something, can you please point me to the
> > document). Thanks.
> 
> Sorry, I don't understand this last comment of yours wrt my point on the
> (lack of) interest of bypassing cache for DDR caching.

What i meant to state was that i did not find any mention that the
cache real allocate policy did not apply for DDR caching.

-sughosh

  reply	other threads:[~2013-07-10 10:05 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-02 12:35 [U-Boot] [RFC PATCH] arm: arm926ejs: flush cache before disable it Bo Shen
2013-07-05 21:02 ` Albert ARIBAUD
2013-07-07 23:33   ` Bo Shen
2013-07-08 10:22     ` Albert ARIBAUD
2013-07-08 12:08       ` Sughosh Ganu
2013-07-08 12:32         ` Albert ARIBAUD
2013-07-08 14:07           ` Sughosh Ganu
2013-07-08 19:55             ` Albert ARIBAUD
2013-07-09  3:59               ` Sughosh Ganu
2013-07-09  6:11               ` Sughosh Ganu
2013-07-09  8:28                 ` Albert ARIBAUD
2013-07-10 10:05                   ` Sughosh Ganu [this message]
2013-07-10 12:30                     ` Albert ARIBAUD
2013-07-10 17:34                       ` Sughosh Ganu
2013-07-12  7:35                         ` Albert ARIBAUD
2013-07-08 12:19       ` Sughosh Ganu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130710100510.GB2450@Hardy \
    --to=urwithsughosh@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox