From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 3/7] tools: dynamically allocate imx_header in imximage
Date: Thu, 11 Jul 2013 20:29:00 +0200 [thread overview]
Message-ID: <201307112029.00660.marex@denx.de> (raw)
In-Reply-To: <1373548001-19728-4-git-send-email-sbabic@denx.de>
Dear Stefano Babic,
> Change to dynamically allocate the imx_header to correctly
> allocate the IVT, Boot Data and DCD at correct locations
> depending on the boot media.
>
> Also check that the Image Vector Table Offset + IVT +
> Boot Data + DCD <= Initial Load Region Size.
>
> Previously struct imx_header was always 4096 bytes and was
> not dealing correctly with the Image Vector Table Offset.
>
> Now, the memory allocation looks for e.g. SD boot like this
>
> Storage u-boot.imx RAM
> Device
>
> 00000000 177ff000 <--------------
>
> 00000400 00000000 d1 00 20 40 IVT.header 177ff400 <------- |
> 00000404 00000004 00 00 80 17 IVT.entry 177ff404 ----------- |
> 00000408 00000008 00 00 00 00 IVT.reserved1 177ff408 | | |
> 0000040C 0000000C 2c f4 7f 17 IVT.dcd 177ff40C ------ | | |
> 00000410 00000010 20 f4 7f 17 IVT.boot 177ff410 ---- | | | |
> 00000414 00000014 00 f4 7f 17 IVT.self 177ff414 -------- | |
> 00000418 00000018 00 00 00 00 IVT.csf 177ff418 | | | |
> 0000041C 0000001C 00 00 00 00 IVT.reserved2 177ff41C | | | |
> 00000420 00000020 00 f0 7f 17 BootData.start 177ff420 <--- | | ---
> 00000424 00000024 00 60 03 00 BootData.length 177ff424 | |
> 00000428 00000028 00 00 00 00 BootData.plugin 177ff428 | |
> 0000042C 0000002C d2 03 30 40 DCD.header 177ff42C <----- |
> ... |
> 00001000 00000c00 13 00 00 ea U-Boot Start 17800000 <----------
>
> While at it also remove the unused #define HEADER_OFFSET.
>
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> ---
> tools/imximage.c | 44 +++++++++++++++++++++++++++++++++++++-------
> tools/imximage.h | 16 +++++++++++++---
> 2 files changed, 50 insertions(+), 10 deletions(-)
>
> diff --git a/tools/imximage.c b/tools/imximage.c
> index d87e94d..984cb9b 100644
> --- a/tools/imximage.c
> +++ b/tools/imximage.c
> @@ -47,7 +47,7 @@ static table_entry_t imximage_cmds[] = {
> * Supported Boot options for configuration file
> * this is needed to set the correct flash offset
> */
> -static table_entry_t imximage_bootops[] = {
> +static table_entry_t imximage_boot_offset[] = {
> {FLASH_OFFSET_ONENAND, "onenand", "OneNAND Flash",},
> {FLASH_OFFSET_NAND, "nand", "NAND Flash", },
> {FLASH_OFFSET_NOR, "nor", "NOR Flash", },
> @@ -58,6 +58,20 @@ static table_entry_t imximage_bootops[] = {
> };
>
> /*
> + * Supported Boot options for configuration file
> + * this is needed to determine the initial load size
> + */
> +static table_entry_t imximage_boot_loadsize[] = {
> + {FLASH_LOADSIZE_ONENAND, "onenand", "OneNAND Flash",},
> + {FLASH_LOADSIZE_NAND, "nand", "NAND Flash", },
> + {FLASH_LOADSIZE_NOR, "nor", "NOR Flash", },
> + {FLASH_LOADSIZE_SATA, "sata", "SATA Disk", },
> + {FLASH_LOADSIZE_SD, "sd", "SD Card", },
> + {FLASH_LOADSIZE_SPI, "spi", "SPI Flash", },
> + {-1, "", "Invalid", },
> +};
> +
> +/*
> * IMXIMAGE version definition for i.MX chips
> */
> static table_entry_t imximage_versions[] = {
> @@ -70,6 +84,8 @@ static struct imx_header imximage_header;
> static uint32_t imximage_version;
> /* Image Vector Table Offset */
> static uint32_t imximage_ivt_offset;
> +/* Initial Load Region Size */
> +static uint32_t imximage_init_loadsize;
>
> static set_dcd_val_t set_dcd_val;
> static set_dcd_rst_t set_dcd_rst;
> @@ -211,7 +227,9 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr,
> uint32_t dcd_len, /* Set magic number */
> fhdr_v1->app_code_barker = APP_CODE_BARKER;
>
> - hdr_base = entry_point - sizeof(struct imx_header);
> + /* TODO: check i.MX image V1 handling, for now use 'old' style */
> + /* hdr_base = entry_point - imximage_init_loadsize + flash_offset; */
The above line should probably be removed.
[...]
> @@ -163,7 +173,7 @@ struct imx_header {
> imx_header_v1_t hdr_v1;
> imx_header_v2_t hdr_v2;
> } header;
> -} __attribute__((aligned(4096)));
> +};
What about the alignment, is it preserved?
Best regards,
Marek Vasut
next prev parent reply other threads:[~2013-07-11 18:29 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-11 13:06 [U-Boot] [PATCH v1 0/7] The patchset fixes some issue in the generation of the imx image Stefano Babic
2013-07-11 13:06 ` [U-Boot] [PATCH v1 1/7] tools: imx_header should not include flash_offset Stefano Babic
2013-07-11 13:06 ` [U-Boot] [PATCH v1 2/7] tools: rename mximage_flash_offset to imximage_ivt_offset Stefano Babic
2013-07-11 13:06 ` [U-Boot] [PATCH v1 3/7] tools: dynamically allocate imx_header in imximage Stefano Babic
2013-07-11 18:29 ` Marek Vasut [this message]
2013-07-11 13:06 ` [U-Boot] [PATCH v1 4/7] tools: add variable padding of data image in mkimage Stefano Babic
2013-07-11 13:06 ` [U-Boot] [PATCH v1 5/7] tools: add padding of data image file for imximage Stefano Babic
2013-07-11 13:06 ` [U-Boot] [PATCH v1 6/7] tools: add support for setting the CSF into imximage Stefano Babic
2013-07-11 18:14 ` Wolfgang Denk
2013-07-12 9:17 ` Stefano Babic
2013-07-11 13:06 ` [U-Boot] [PATCH v1 7/7] imx: add status reporting for HAB status Stefano Babic
2013-07-11 17:17 ` Fabio Estevam
2013-07-12 8:27 ` Stefano Babic
2013-07-11 18:31 ` Marek Vasut
2013-07-12 8:34 ` Stefano Babic
2013-07-11 18:11 ` [U-Boot] [PATCH v1 0/7] The patchset fixes some issue in the generation of the imx image Otavio Salvador
2013-07-11 18:17 ` Eric Nelson
2013-07-11 20:40 ` Eric Nelson
2013-08-12 14:39 ` [U-Boot] [PATCH v2 " Stefano Babic
2013-08-12 14:39 ` [U-Boot] [PATCH v2 1/7] tools: imx_header should not include flash_offset Stefano Babic
2013-08-12 14:39 ` [U-Boot] [PATCH v2 2/7] tools: rename mximage_flash_offset to imximage_ivt_offset Stefano Babic
2013-08-12 14:39 ` [U-Boot] [PATCH v2 3/7] tools: dynamically allocate imx_header in imximage Stefano Babic
2013-08-12 14:39 ` [U-Boot] [PATCH v2 4/7] tools: add variable padding of data image in mkimage Stefano Babic
2013-08-12 14:39 ` [U-Boot] [PATCH v2 5/7] tools: add padding of data image file for imximage Stefano Babic
2013-08-13 5:10 ` Marek Vasut
2013-08-19 11:17 ` Stefano Babic
2013-08-12 14:39 ` [U-Boot] [PATCH v2 6/7] tools: add support for setting the CSF into imximage Stefano Babic
2013-08-15 18:49 ` Bernhard Walle
2013-08-12 14:39 ` [U-Boot] [PATCH v2 7/7] imx: add status reporting for HAB status Stefano Babic
2013-08-20 20:21 ` Bernhard Walle
2013-08-12 15:23 ` [U-Boot] [PATCH v2 0/7] The patchset fixes some issue in the generation of the imx image Otavio Salvador
2013-08-19 11:30 ` Stefano Babic
2013-08-19 11:40 ` Otavio Salvador
2013-08-19 16:19 ` Tom Rini
2013-08-19 16:44 ` Stefano Babic
2013-08-19 19:00 ` Tom Rini
2013-08-19 19:45 ` Marek Vasut
2013-08-19 19:51 ` Tom Rini
2013-08-19 17:03 ` [U-Boot] [PATCH v3 " Stefano Babic
2013-08-19 17:03 ` [U-Boot] [PATCH v3 1/7] tools: imx_header should not include flash_offset Stefano Babic
2013-08-19 17:03 ` [U-Boot] [PATCH v3 2/7] tools: rename mximage_flash_offset to imximage_ivt_offset Stefano Babic
2013-08-19 17:03 ` [U-Boot] [PATCH v3 3/7] tools: dynamically allocate imx_header in imximage Stefano Babic
2013-08-19 17:03 ` [U-Boot] [PATCH v3 4/7] tools: add variable padding of data image in mkimage Stefano Babic
2013-08-19 17:03 ` [U-Boot] [PATCH v3 5/7] tools: add padding of data image file for imximage Stefano Babic
2013-08-27 15:17 ` [U-Boot] [PATCH v4 " Stefano Babic
2013-09-10 22:14 ` York Sun
2013-09-11 7:13 ` Stefano Babic
2013-09-11 15:20 ` York Sun
2013-08-19 17:03 ` [U-Boot] [PATCH v3 6/7] tools: add support for setting the CSF into imximage Stefano Babic
2013-08-19 17:03 ` [U-Boot] [PATCH v3 7/7] imx: add status reporting for HAB status Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201307112029.00660.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox