From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Fri, 12 Jul 2013 06:06:28 +0200
Subject: [U-Boot] U-boot timeout with KSZ8021 phy
In-Reply-To: <CAAAP30G_=F+nB5fssvMHLcdW5mos47MEGUjyx8i9Xt9y0G8x_g@mail.gmail.com>
References: <CAAAP30E6HNAT2aEk=pvoKjNSMyLnNoF59B8_eJOLcudSk8q0yw@mail.gmail.com>
	<201307112236.49001.marex@denx.de>
	<CAAAP30G_=F+nB5fssvMHLcdW5mos47MEGUjyx8i9Xt9y0G8x_g@mail.gmail.com>
Message-ID: <201307120606.28244.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Alexandre Pereira da Silva,

> On Thu, Jul 11, 2013 at 5:36 PM, Marek Vasut <marex@denx.de> wrote:
> > Dear Alexandre Pereira da Silva,
> > 
> >> On Thu, Jul 11, 2013 at 4:55 PM, Marek Vasut <marex@denx.de> wrote:
> > Make sure to check the direction too, it can go either from phy to fec or
> > the other way IIRC.
> 
> Ok, it seems this was caused by a bad tftp server and not by the board
> itself.
> 
> I can confirm KSZ8021 is functional, after defining CONFIG_PHYLIB to
> mx28evk.h

OK, good to hear! Btw. the MX28EVK uses LAN8720 PHY, it is the M28EVK that uses 
the Micrel PHY.

btw. I suspect you should really split away your platform into separate space 
instead of hacking around various boards ;-)

Best regards,
Marek Vasut