From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Fri, 12 Jul 2013 06:40:31 +0200
Subject: [U-Boot] U-boot timeout with KSZ8021 phy
In-Reply-To: <CAAAP30G+iZ2fJu7UjCwOvb5qN=7PEYi0WCsaXbMtRqL1OJn=jg@mail.gmail.com>
References: <CAAAP30E6HNAT2aEk=pvoKjNSMyLnNoF59B8_eJOLcudSk8q0yw@mail.gmail.com>
	<201307120606.28244.marex@denx.de>
	<CAAAP30G+iZ2fJu7UjCwOvb5qN=7PEYi0WCsaXbMtRqL1OJn=jg@mail.gmail.com>
Message-ID: <201307120640.31721.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Alexandre Pereira da Silva,

> On Fri, Jul 12, 2013 at 1:06 AM, Marek Vasut <marex@denx.de> wrote:
> > Dear Alexandre Pereira da Silva,
> > 
> >> On Thu, Jul 11, 2013 at 5:36 PM, Marek Vasut <marex@denx.de> wrote:
> >> > Dear Alexandre Pereira da Silva,
> >> > 
> >> >> On Thu, Jul 11, 2013 at 4:55 PM, Marek Vasut <marex@denx.de> wrote:
> >> > Make sure to check the direction too, it can go either from phy to fec
> >> > or the other way IIRC.
> >> 
> >> Ok, it seems this was caused by a bad tftp server and not by the board
> >> itself.
> >> 
> >> I can confirm KSZ8021 is functional, after defining CONFIG_PHYLIB to
> >> mx28evk.h
> > 
> > OK, good to hear! Btw. the MX28EVK uses LAN8720 PHY, it is the M28EVK
> > that uses the Micrel PHY.
> > 
> > btw. I suspect you should really split away your platform into separate
> > space instead of hacking around various boards ;-)
> 
> Yes, I will do that, but the first priority was to get it working :-)
> 
> Thanks for your help solving this issue.

No problem, nice to hear it works ;-)

Best regards,
Marek Vasut