public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] dfu, nand, ubi: add partubi alt settings for updating ubi partition
Date: Tue, 16 Jul 2013 07:00:57 +0200	[thread overview]
Message-ID: <201307160700.57788.marex@denx.de> (raw)
In-Reply-To: <1373950449-21686-1-git-send-email-hs@denx.de>

Dear Heiko Schocher,

> updating an ubi partition needs a completely erased mtd partition,
> see:
> http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html
> 
> So, add partubi alt setting for the dfu_alt_info environment
> variable to mark this partition as an ubi partition. In case we
> update an ubi partition, we erase after flashing the image into the
> partition, the remaining sektors.
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
> Cc: Tom Rini <trini@ti.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> 
> ---
> 
> - This patch is also a good starting point to fix up updating ubi, as
>   we currently use "nand erase" for erasing the sektors. This is
>   not the prefered way for writing an ubi image, see:
>   http://www.linux-mtd.infradead.org/faq/ubi.html#L_flash_img
> 
>   This must be fixed ... we have no "ubiformat" in u-boot, or?
> 
> - changes for v2:
>   - do not use spread = 1 for nand_erase_opts, to prevent
>     errormessage if there are bad blocks in the erase range.
> ---
>  drivers/dfu/dfu.c      | 30 +++++++++++++++++++++++++++++-
>  drivers/dfu/dfu_nand.c | 26 ++++++++++++++++++++++++++
>  include/dfu.h          |  2 ++
>  3 Dateien ge?ndert, 57 Zeilen hinzugef?gt(+), 1 Zeile entfernt(-)
> 
> diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
> index 0521752..7ba7026 100644
> --- a/drivers/dfu/dfu.c
> +++ b/drivers/dfu/dfu.c
> @@ -23,6 +23,7 @@
>  #include <errno.h>
>  #include <malloc.h>
>  #include <mmc.h>
> +#include <nand.h>
>  #include <fat.h>
>  #include <dfu.h>
>  #include <linux/list.h>
> @@ -176,6 +177,34 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int
> size, int blk_seq_num) ret = dfu->flush_medium(dfu);
>  		printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
> 
> +		/* in case of ubi partition, erase rest of the partition */
> +		if (dfu->ubi == 1) {
> +			int ret;
> +			nand_info_t *nand;
> +			/* erase complete partition */
> +			nand_erase_options_t opts;
> +
> +			if (nand_curr_device < 0 ||
> +			    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
> +			    !nand_info[nand_curr_device].name) {
> +				printf("%s: invalid nand device\n", __func__);
> +				return -1;
> +			}
> +
> +			nand = &nand_info[nand_curr_device];
> +
> +			memset(&opts, 0, sizeof(opts));
> +			opts.offset = dfu->data.nand.start + dfu->offset +
> +					dfu->bad_skip;
> +			opts.length = dfu->data.nand.start +
> +					dfu->data.nand.size - opts.offset;
> +			ret = nand_erase_opts(nand, &opts);
> +			if (ret != 0) {
> +				printf("Failure erase: %d\n", ret);
> +				return ret;

Are you not leaking memory here ? I suspect you should call dfu_free_buf() as 
below ?

> +			}
> +		}
> +
>  		/* clear everything */
>  		dfu_free_buf();
>  		dfu->crc = 0;
> @@ -186,7 +215,6 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int
> size, int blk_seq_num) dfu->i_buf = dfu->i_buf_start;
> 
>  		dfu->inited = 0;
> -
>  	}
> 
>  	return ret = 0 ? size : ret;
> diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
> index 07dee89..d8afc48 100644
> --- a/drivers/dfu/dfu_nand.c
> +++ b/drivers/dfu/dfu_nand.c
> @@ -153,6 +153,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char
> *s) char *st;
>  	int ret, dev, part;
> 
> +	dfu->ubi = 0;
>  	dfu->dev_type = DFU_DEV_NAND;
>  	st = strsep(&s, " ");
>  	if (!strcmp(st, "raw")) {
> @@ -185,7 +186,32 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char
> *s)
> 
>  		dfu->data.nand.start = pi->offset;
>  		dfu->data.nand.size = pi->size;
> +	} else if (!strcmp(st, "partubi")) {
> +		char mtd_id[32];
> +		struct mtd_device *mtd_dev;
> +		u8 part_num;
> +		struct part_info *pi;
> +
> +		dfu->layout = DFU_RAW_ADDR;
> 
> +		dev = simple_strtoul(s, &s, 10);
> +		s++;
> +		part = simple_strtoul(s, &s, 10);
> +
> +		sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
> +		printf("using id '%s'\n", mtd_id);
> +
> +		mtdparts_init();
> +
> +		ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
> +		if (ret != 0) {
> +			printf("Could not locate '%s'\n", mtd_id);
> +			return -1;
> +		}
> +
> +		dfu->data.nand.start = pi->offset;
> +		dfu->data.nand.size = pi->size;
> +		dfu->ubi = 1;
>  	} else {
>  		printf("%s: Memory layout (%s) not supported!\n", __func__, st);
>  		return -1;
> diff --git a/include/dfu.h b/include/dfu.h
> index 124653c..7bbe42d 100644
> --- a/include/dfu.h
> +++ b/include/dfu.h
> @@ -111,6 +111,8 @@ struct dfu_entity {
>  	u32 bad_skip;	/* for nand use */
> 
>  	unsigned int inited:1;
> +	/* for nand/ubi use */
> +	unsigned int ubi:1;
>  };
> 
>  int dfu_config_entities(char *s, char *interface, int num);

  reply	other threads:[~2013-07-16  5:00 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-15  9:49 [U-Boot] [PATCH 1/2] dfu, nand, ubi: add partubi alt settings for updating ubi partition Heiko Schocher
2013-07-16  4:54 ` [U-Boot] [PATCH v2] " Heiko Schocher
2013-07-16  5:00   ` Marek Vasut [this message]
2013-07-16  5:11     ` Heiko Schocher
2013-07-16  7:41   ` Lukasz Majewski
2013-07-16  8:01     ` Heiko Schocher
2013-07-16  8:19       ` Lukasz Majewski
2013-07-16 15:14   ` Tom Rini
2013-07-16 15:43     ` Heiko Schocher
2013-07-17 22:35   ` Scott Wood
2013-07-18  5:01     ` Heiko Schocher
2013-07-18  6:04   ` [U-Boot] [PATCH v3] " Heiko Schocher
2013-07-18  6:57     ` Lukasz Majewski
2013-07-22 21:08       ` Scott Wood
2013-07-19  4:32     ` [U-Boot] [PATCH v4] " Heiko Schocher
2013-07-19  6:45       ` Lukasz Majewski
2013-07-19 13:54         ` Marek Vasut
2013-07-22 21:24       ` Scott Wood
2013-07-23 13:12         ` Heiko Schocher
2013-07-23 23:13           ` Scott Wood
2013-07-23 23:22       ` Scott Wood
2013-07-24  4:30         ` Heiko Schocher
2013-07-24 19:08           ` Scott Wood
2013-07-25  4:34             ` Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201307160700.57788.marex@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox