[U-Boot] [PATCH v3 6/7] USB: usb-hub: Add a weak function for resetting devices

[Marek Vasut <marex@denx.de>]

Dear Dan Murphy,

> Add a __weak function that can be overridden to reset devices
> attached to an ehci devices after the FEAT_POWER has been submitted
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> v3 - Modified location of the weak function -
> http://patchwork.ozlabs.org/patch/258229/
> 
>  common/usb_hub.c |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/common/usb_hub.c b/common/usb_hub.c
> index 774ba63..c655b75 100644
> --- a/common/usb_hub.c
> +++ b/common/usb_hub.c
> @@ -62,6 +62,10 @@
>  static struct usb_hub_device hub_dev[USB_MAX_HUB];
>  static int usb_hub_index;
> 
> +__weak void usb_hub_reset_devices(int port)
> +{
> +	return;
> +}
> 
>  static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int
> size) {
> @@ -444,6 +448,14 @@ static int usb_hub_configure(struct usb_device *dev)
>  	      "" : "no ");
>  	usb_hub_power_on(hub);
> 
> +	/*
> +	 * Reset any devices that may be in a bad state when applying
> +	 * the power.  This is a __weak function.  Resettig of the devices
> +	 * should occur in the board file of the device.
> +	 */
> +	for (i = 0; i < dev->maxchild; i++)
> +		usb_hub_reset_devices(i + 1);
> +
>  	for (i = 0; i < dev->maxchild; i++) {
>  		ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
>  		unsigned short portstatus, portchange;

We hae like 10 reset hooks in the usb code, this means something just isn't 
right. The device doesn't enumerate, right ? Have you tried waiting a little 
after releasing the reset and before starting the EHCI ?

Best regards,
Marek Vasut