From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance
Date: Thu, 18 Jul 2013 16:24:45 +0200 [thread overview]
Message-ID: <201307181624.45937.marex@denx.de> (raw)
In-Reply-To: <1374156931-1718-1-git-send-email-jilin@nvidia.com>
Dear Jim Lin,
> TFTP booting is slow when a USB keyboard is installed and
> stdin has usbkbd added.
> This fix is to change Ctrl-C polling for USB keyboard to every second
> when NET transfer is running.
>
> Signed-off-by: Jim Lin <jilin@nvidia.com>
> ---
> Changes in v2:
> 1. Change configuration name from CONFIG_CTRLC_POLL_MS to
> CONFIG_CTRLC_POLL_S. 2. New code will be executed only when
> CONFIG_CTRLC_POLL_S is defined in configuration header file.
> 3. Add description in README.console.
> Changes in v3:
> 1. Move changes to common/usb_kbd.c and doc/README.usb
> 2. Rename config setting to CONFIG_USBKB_TESTC_PERIOD.
> 3. Remove slow response on USB-keyboard input when TFTP boot is not
> running. Changes in v4:
> 1. Remove changes in doc/README.usb, common/usb_kbd.c and
> CONFIG_USBKB_TESTC_PERIOD
> 2. Modify net/net.c
> Changes in v5:
> 1. Change variable name to ctrlc_t_start.
> 2. Use two calls of get_timer(0) to get time gap.
> Changes in v6:
> 1. In common/usb_kbd.c, check net_busy_flag to determine whether we poll
> USB keyboard status.
> 2. In include/usb.h, add external variable declaration net_busy_flag
>
>
> common/usb_kbd.c | 15 +++++++++++++++
> include/usb.h | 2 +-
> 2 files changed, 16 insertions(+), 1 deletions(-)
>
> diff --git a/common/usb_kbd.c b/common/usb_kbd.c
> index 3174b5e..3288c69 100644
> --- a/common/usb_kbd.c
> +++ b/common/usb_kbd.c
> @@ -121,6 +121,9 @@ struct usb_kbd_pdata {
> uint8_t flags;
> };
>
> +/* The period of time between two calls of usb_kbd_testc(). */
> +static unsigned long kbd_testc_tms;
> +
> /* Generic keyboard event polling. */
> void usb_kbd_generic_poll(void)
> {
> @@ -366,6 +369,18 @@ static int usb_kbd_testc(void)
> struct usb_device *usb_kbd_dev;
> struct usb_kbd_pdata *data;
>
> + /*
> + * If net_busy_flag is 1, NET transfer is running,
> + * then we check key pressed every second to improve
> + * TFTP booting performance.
> + */
> + if (net_busy_flag) {
THis variable is not declared so this patch won't compile
> + if (get_timer(kbd_testc_tms) < CONFIG_SYS_HZ)
> + return 0;
> + else
> + kbd_testc_tms = get_timer(0);
> + }
> +
> dev = stdio_get_by_name(DEVNAME);
> usb_kbd_dev = (struct usb_device *)dev->priv;
> data = usb_kbd_dev->privptr;
> diff --git a/include/usb.h b/include/usb.h
> index d7b082d..824b394 100644
> --- a/include/usb.h
> +++ b/include/usb.h
> @@ -206,7 +206,7 @@ int usb_host_eth_scan(int mode);
>
> int drv_usb_kbd_init(void);
> int usb_kbd_deregister(void);
> -
> +extern int net_busy_flag;
> #endif
> /* routines */
> int usb_init(void); /* initialize the USB Controller */
Best regards,
Marek Vasut
next prev parent reply other threads:[~2013-07-18 14:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-18 14:15 [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance Jim Lin
2013-07-18 14:15 ` [U-Boot] [PATCH v6 2/2] NET: Add net_busy_flag Jim Lin
2013-07-18 17:32 ` Stephen Warren
2013-07-18 23:37 ` Marek Vasut
2013-07-18 14:24 ` Marek Vasut [this message]
2013-07-18 17:29 ` [U-Boot] [PATCH v6 1/2] console: usb: kbd: To improve TFTP booting performance Stephen Warren
2013-07-19 6:43 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201307181624.45937.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox