From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-mpc85xx
Date: Thu, 22 Aug 2013 11:18:11 -0400 [thread overview]
Message-ID: <20130822151811.GL2644@bill-the-cat> (raw)
In-Reply-To: <5214F8BD.7020800@freescale.com>
On Wed, Aug 21, 2013 at 10:28:29AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 39bc12ddc36c9e30199471da0f3a929b178a04b2:
>
> SPL: Makefile: Build a separate autoconf.mk for SPL (2013-08-19
> 18:05:19 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> for you to fetch changes up to b6df9b01fb8c126b212aba92b6523407d3fa60a5:
>
> Makefile: Fix build in a separated directory tree (2013-08-21 09:03:29
> -0700)
>
> ----------------------------------------------------------------
> Prabhakar Kushwaha (1):
> powerpc: Fix CamelCase checkpatch warnings
>
> Shaohui Xie (3):
> powerpc/common/vsc3316: remove const from vsc3316_config parameter
> define
> powerpc/t4240: fix lanes routing for QSGMII protocols
> powerpc/t4240: add QSGMII interface support
>
> Shengzhou Liu (2):
> powerpc/p1010rdb: fix calculating ddr_freq_mhz
> powerpc/sec: Add workaround for SEC A-003571
>
> Shruti Kanetkar (2):
> powerpc: Use print_size() where appropriate
> powerpcv2: Print hardcoded size like print_size() does
>
> Ying Zhang (8):
> spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
> powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled
> some functionality for common SPL
> powerpc: mpc85xx: Support booting from SD Card with SPL
> powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL
> powerpc : spi flash : Support to start from eSPI with SPL
> powerpc : p1022ds : Enable p1022ds to start from eSPI with SPL
> TPL : introduce the TPL based on the SPL
> powerpc: p1022ds: add TPL for p1022ds nand boot
>
> York Sun (2):
> SPDX-License-Identifier: clean up license header
> Makefile: Fix build in a separated directory tree
>
> ?????????????? ?????????????? (1):
> Fix for incorrect conversion hex string to number (FMAN firmware
> address).
>
> Makefile | 50 +++++-
> README | 24 +++
> arch/powerpc/cpu/mpc824x/cpu.c | 8 +-
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 45 +++---
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 32 ++--
> arch/powerpc/cpu/mpc85xx/fdt.c | 12 +-
> arch/powerpc/cpu/mpc85xx/speed.c | 142 ++++++++---------
> arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 14 +-
> arch/powerpc/cpu/mpc85xx/tlb.c | 3 +-
> arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 5 +
> arch/powerpc/cpu/mpc86xx/cpu.c | 22 +--
> arch/powerpc/cpu/mpc86xx/speed.c | 40 ++---
> arch/powerpc/cpu/mpc8xx/cpu.c | 24 ++-
> arch/powerpc/cpu/mpc8xx/video.c | 4 +-
> .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 4 +
> arch/powerpc/cpu/mpc8xxx/ddr/main.c | 3 +-
> arch/powerpc/cpu/mpc8xxx/law.c | 6 +-
> arch/powerpc/cpu/ppc4xx/cpu.c | 8 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 1 +
> board/freescale/b4860qds/b4860qds_crossbar_con.h | 12 +-
> board/freescale/common/Makefile | 2 -
> board/freescale/common/vsc3316_3308.c | 2 +-
> board/freescale/common/vsc3316_3308.h | 2 +-
> board/freescale/mpc8540ads/mpc8540ads.c | 2 +-
> board/freescale/mpc8541cds/mpc8541cds.c | 2 +-
> board/freescale/mpc8555cds/mpc8555cds.c | 2 +-
> board/freescale/mpc8560ads/mpc8560ads.c | 2 +-
> board/freescale/p1010rdb/spl_minimal.c | 2 +-
> board/freescale/p1022ds/Makefile | 3 +
> board/freescale/p1022ds/spl.c | 121 ++++++++++++++
> board/freescale/p1022ds/spl_minimal.c | 53 +------
> board/freescale/p1022ds/tlb.c | 23 ++-
> board/freescale/p1_p2_rdb_pc/ddr.c | 2 +-
> board/freescale/p1_twr/ddr.c | 2 +-
> board/freescale/t4qds/eth.c | 80 +++++++---
> board/freescale/t4qds/t4240qds.c | 47 +++++-
> board/sbc8548/sbc8548.c | 4 +-
> board/socrates/socrates.c | 2 +-
> board/xes/xpedite537x/ddr.c | 2 +-
> common/env_common.c | 2 -
> config.mk | 30 +++-
> doc/README.TPL | 45 ++++++
> doc/README.mpc85xx-sd-spi-boot | 81 ++++++++++
> drivers/mmc/Makefile | 3 +
> drivers/mmc/fsl_esdhc_spl.c | 115 ++++++++++++++
> drivers/mmc/mmc.c | 2 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/fsl_elbc_spl.c | 27 +++-
> drivers/mtd/spi/Makefile | 1 +
> drivers/mtd/spi/fsl_espi_spl.c | 62 ++++++++
> drivers/mtd/spi/spi_flash.c | 2 +
> drivers/net/fm/eth.c | 4 +-
> drivers/net/fm/memac.c | 1 +
> drivers/net/fm/t4240.c | 40 ++++-
> drivers/spi/fsl_espi.c | 2 +-
> include/configs/MPC8313ERDB.h | 1 -
> include/configs/P1022DS.h | 166
> ++++++++++++++++----
> include/configs/p1_p2_rdb_pc.h | 1 -
> include/e500.h | 16 +-
> include/fsl_esdhc.h | 1 +
> include/mpc86xx.h | 6 +-
> spl/Makefile | 23 ++-
> 63 files changed, 1101 insertions(+), 349 deletions(-)
> create mode 100644 board/freescale/p1022ds/spl.c
> create mode 100644 doc/README.TPL
> create mode 100644 doc/README.mpc85xx-sd-spi-boot
> create mode 100644 drivers/mmc/fsl_esdhc_spl.c
> create mode 100644 drivers/mtd/spi/fsl_espi_spl.c
Applied to u-boot/master (and also confirmed the bugfix), thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130822/fc94dac7/attachment.pgp>
next prev parent reply other threads:[~2013-08-22 15:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-21 17:28 [U-Boot] Pull request: u-boot-mpc85xx York Sun
2013-08-22 15:18 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-11-07 4:01 [U-Boot] pull request u-boot-mpc85xx Priyanka Jain
2019-11-07 17:31 ` Tom Rini
2019-11-20 5:45 ` Priyanka Jain
2019-11-20 22:43 ` Tom Rini
2019-11-26 4:49 ` Priyanka Jain
2019-12-02 15:15 ` Tom Rini
2014-01-21 23:07 [U-Boot] Pull " York Sun
2014-01-22 15:33 ` Tom Rini
2013-09-12 17:36 [U-Boot] Pull request: u-boot-mpc85xx York Sun
2013-09-14 1:26 ` Tom Rini
2013-08-20 19:46 [U-Boot] Pull request : u-boot-mpc85xx York Sun
2013-08-21 13:40 ` Tom Rini
2013-08-21 16:10 ` York Sun
2013-08-14 19:11 [U-Boot] Pull request: u-boot-mpc85xx York Sun
2013-08-16 13:35 ` Tom Rini
2013-08-12 22:43 York Sun
2013-08-13 15:38 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130822151811.GL2644@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox