[U-Boot] [PATCH V4] ARM: mxs: tools: Add mkimage support for MXS bootstream

[Marek Vasut <marex@denx.de>]

Dear Stefano Babic,

> Hi Marek,
> 
> On 25/08/2013 18:33, Marek Vasut wrote:
> >>> +      MODE string_mode
> >>> +      - Restart the CPU and start booting from device specified by the
> >>> +	"string_mode" argument. The "string_mode" differs for each CPU
> >>> +	and can be:
> >>> +         i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
> >>> +                               JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
> >>> +         i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
> >>> +                               JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
> >>> +
> >> 
> >> Is this equivalent to the "bmode" command on i.MX5/6 ?
> > 
> > BMODE command? How does that one work?
> 
> It sets for i.MX (MX5/MX6) from which source the BootROM must read the
> image. We can say it is a soft way to overwrite the boot pin
> configuration without having to write into fuses, useful to test
> different boot conditions.

Seems to be the same thing ... or similar at least.

> >>>   * Compression Types
> >>> 
> >>> diff --git a/tools/Makefile b/tools/Makefile
> >>> index 33fad6b..bbae5a2 100644
> >>> --- a/tools/Makefile
> >>> +++ b/tools/Makefile
> >>> @@ -83,6 +83,7 @@ NOPED_OBJ_FILES-y += aisimage.o
> >>> 
> >>>  NOPED_OBJ_FILES-y += kwbimage.o
> >>>  NOPED_OBJ_FILES-y += pblimage.o
> >>>  NOPED_OBJ_FILES-y += imximage.o
> >>> 
> >>> +NOPED_OBJ_FILES-y += mxsimage.o
> >> 
> >> Can you reorder the list ?
> > 
> > How? It's out of order already.
> 
> I know - it would be nice if the list was in order again, at least for
> the components of mkimage (NOPED_OBJ_FILES-).

I will do a separate patch.

> >>> + * CRC32
> >>> + */
> >>> +static uint32_t crc32(uint8_t *data, uint32_t len)
> >>> +{
> >>> +	const uint32_t poly = 0x04c11db7;
> >> 
> >> Comparing this polinomial with the one in lib/crc32.c, they are
> >> identical. The crc32 function you define here should give the same
> >> result as our old crc32 (global) in lib/crc32.c. Then, can you drop this
> >> one and use the already implemented function ?
> > 
> > As I do not want to diverge more than necessary, this can be done in
> > subsequent patch.
> 
> However this adds a duplication in the code, and using the global crc
> should be quite straightforward.

We cannot use the zlib crc32 function which is implemented in lib/crc32.c as the 
CRC32 used by MXS bootrom uses bit-flipped polynomial compared to the zlib 
implementation.

[...]

Best regards,
Marek Vasut