From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
Date: Fri, 30 Aug 2013 17:13:58 -0400 [thread overview]
Message-ID: <20130830211358.GW17898@bill-the-cat> (raw)
In-Reply-To: <52210985.8080003@ti.com>
On Fri, Aug 30, 2013 at 05:07:17PM -0400, Tom Rini wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 08/30/2013 12:50 AM, Sricharan R wrote:
> > Hi Tom,
> >
> > On Friday 23 August 2013 09:56 PM, Tom Rini wrote:
> >> Test on Beaglebone white over cpsw, usb ether and SD card (read and
> >> write), performance increased, crc32 of data matches.
> >>
> >> Signed-off-by: Tom Rini <trini@ti.com>
> >> ---
> >> arch/arm/cpu/armv7/am33xx/board.c | 8 ++++++++
> >> 1 file changed, 8 insertions(+)
> >>
> >> diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
> >> index 2ea3d69..c261af5 100644
> >> --- a/arch/arm/cpu/armv7/am33xx/board.c
> >> +++ b/arch/arm/cpu/armv7/am33xx/board.c
> >> @@ -225,3 +225,11 @@ void s_init(void)
> >> sdram_init();
> >> #endif
> >> }
> >> +
> >> +#ifndef CONFIG_SYS_DCACHE_OFF
> >> +void enable_caches(void)
> >> +{
> >> + /* Enable D-cache. I-cache is already enabled in start.S */
> >> + dcache_enable();
> >> +}
> >> +#endif /* !CONFIG_SYS_DCACHE_OFF */
> > This is fine. Do we have secure devices here ?
> >
> > If so, we should take care of setting the domains permissions for
> > avoiding prefetch aborts. As it was done for OMAP using
> > arm_init_domains. So that function and the above should be executed on
> > am33xx as well.
> >
> > Thanks to Lokesh for reminding this.
>
> Yes, but I can't easily test them. I'll see if arm_init_domains just
> works on non-HS devices (I know I had a failure pulling all the OMAP4
> code over, but didn't try hard, just looked again at the "easy" path).
Yeah, that code as-is hangs the boards. So if the HS devices need
something, it'll go with the rest of their patches until we're moving it
upstream. But good to note a potential problem area!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130830/8a5b601d/attachment.pgp>
next prev parent reply other threads:[~2013-08-30 21:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 16:26 [U-Boot] [PATCH] am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF Tom Rini
2013-08-30 4:50 ` Sricharan R
2013-08-30 21:07 ` Tom Rini
2013-08-30 21:13 ` Tom Rini [this message]
2013-09-02 3:52 ` Lokesh Vutla
2013-09-06 18:01 ` Tom Rini
2013-12-13 12:46 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130830211358.GW17898@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox