[U-Boot] [PATCH v2 1/3] dfu: unify mmc/nand read/write ops enum

[U-Boot] [PATCH v2 1/3] dfu: unify mmc/nand read/write ops enum

[Afzal Mohammed]

MMC and NAND independently defines same enumerators for read/write.
Unify them by defining enum in dfu header. RAM support that is being
added newly also can make use of it.

Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
---

v2: new

 drivers/dfu/dfu_mmc.c  | 9 ++-------
 drivers/dfu/dfu_nand.c | 7 +------
 include/dfu.h          | 5 +++++
 3 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 0871a77..f942758 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -13,16 +13,11 @@
 #include <div64.h>
 #include <dfu.h>
 
-enum dfu_mmc_op {
-	DFU_OP_READ = 1,
-	DFU_OP_WRITE,
-};
-
 static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE)
 				dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE];
 static long dfu_file_buf_len;
 
-static int mmc_block_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
+static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
 			u64 offset, void *buf, long *len)
 {
 	char cmd_buf[DFU_CMD_BUF_SIZE];
@@ -65,7 +60,7 @@ static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long *len)
 	return 0;
 }
 
-static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
+static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu,
 			void *buf, long *len)
 {
 	char cmd_buf[DFU_CMD_BUF_SIZE];
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
index 0ec12cf..edbf5a9 100644
--- a/drivers/dfu/dfu_nand.c
+++ b/drivers/dfu/dfu_nand.c
@@ -19,12 +19,7 @@
 #include <jffs2/load_kernel.h>
 #include <nand.h>
 
-enum dfu_nand_op {
-	DFU_OP_READ = 1,
-	DFU_OP_WRITE,
-};
-
-static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu,
+static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
 			u64 offset, void *buf, long *len)
 {
 	loff_t start, lim;
diff --git a/include/dfu.h b/include/dfu.h
index 47b9055..6115d90 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -29,6 +29,11 @@ enum dfu_layout {
 	DFU_FS_EXT4,
 };
 
+enum dfu_op {
+	DFU_OP_READ = 1,
+	DFU_OP_WRITE,
+};
+
 struct mmc_internal_data {
 	/* RAW programming */
 	unsigned int lba_start;
-- 
1.8.2.135.g7b592fa

[U-Boot] [PATCH v2 2/3] dfu: ram support

[Afzal Mohammed]

DFU spec mentions it as a method to upgrade firmware (software stored
in writable non-volatile memory). It also says other potential uses of
DFU is beyond scope of the spec.

Here such a beyond the scope use is being attempted - directly pumping
binary images from host via USB to RAM. This facility is a developer
centric one in that it gives advantage over upgrading non-volatile
memory for testing new images every time during development and/or
testing.

Directly putting image onto RAM would speed up upgrade process. This and
convenience was the initial thoughts that led to doing this, speed
improvement over MMC was only 1 second though - 6 sec on RAM as opposed
to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing
DFU framework to avoid multiple copy for ram (if worth) may help, and
on other platforms and other boot media like NAND maybe improvement
would be higher.

And for a platform that doesn't yet have proper DFU suppport for
non-volatile media's, DFU to RAM can be used.

Another minor advantage would be to increase life of mmc/nand as it
would be less used during development/testing.

usage: <image name> ram <start address> <size>
eg. kernel ram 0x81000000 0x1000000

Downloading images to RAM using DFU is not something new, this is
acheived in openmoko also.

DFU on RAM can be used for extracting RAM contents to host using dfu
upload. Perhaps this can be extended to io for squeezing out register
dump through usb, if it is worth.

Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
---

v2: remove read/write enumerator define's, instead use new common ones

 drivers/dfu/Makefile  |  1 +
 drivers/dfu/dfu.c     |  7 +++--
 drivers/dfu/dfu_ram.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dfu.h         | 18 ++++++++++++
 4 files changed, 101 insertions(+), 2 deletions(-)
 create mode 100644 drivers/dfu/dfu_ram.c

diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index fca370a..de9e44e 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -12,6 +12,7 @@ LIB	= $(obj)libdfu.o
 COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o
 COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o
 COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o
+COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o
 
 SRCS    := $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index d73d510..7b3d05d 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -325,6 +325,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
 	} else if (strcmp(interface, "nand") == 0) {
 		if (dfu_fill_entity_nand(dfu, s))
 			return -1;
+	} else if (strcmp(interface, "ram") == 0) {
+		if (dfu_fill_entity_ram(dfu, s))
+			return -1;
 	} else {
 		printf("%s: Device %s not (yet) supported!\n",
 		       __func__,  interface);
@@ -374,14 +377,14 @@ int dfu_config_entities(char *env, char *interface, int num)
 
 const char *dfu_get_dev_type(enum dfu_device_type t)
 {
-	const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" };
+	const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM" };
 	return dev_t[t];
 }
 
 const char *dfu_get_layout(enum dfu_layout l)
 {
 	const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2",
-					   "EXT3", "EXT4" };
+					   "EXT3", "EXT4", "RAM_ADDR" };
 	return dfu_layout[l];
 }
 
diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c
new file mode 100644
index 0000000..a603bfb
--- /dev/null
+++ b/drivers/dfu/dfu_ram.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2013
+ * Afzal Mohammed <afzal.mohd.ma@gmail.com>
+ *
+ * Reference: dfu_mmc.c
+ * Copyright (C) 2012 Samsung Electronics
+ * author: Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <dfu.h>
+
+static int dfu_transfer_medium_ram(enum dfu_op op, struct dfu_entity *dfu,
+				   u64 offset, void *buf, long *len)
+{
+	if (dfu->layout != DFU_RAM_ADDR) {
+		printf("%s: unsupported layout :%s\n", __func__,
+		       dfu_get_layout(dfu->layout));
+		return  -EINVAL;
+	}
+
+	if (offset > dfu->data.ram.size) {
+		printf("%s: request exceeds allowed area\n", __func__);
+		return -EINVAL;
+	}
+
+	if (op == DFU_OP_WRITE)
+		memcpy(dfu->data.ram.start + offset, buf, *len);
+	else
+		memcpy(buf, dfu->data.ram.start + offset, *len);
+
+	return 0;
+}
+
+static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset,
+				void *buf, long *len)
+{
+	return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset, buf, len);
+}
+
+static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset,
+			       void *buf, long *len)
+{
+	if (!*len) {
+		*len = dfu->data.ram.size;
+		return 0;
+	}
+
+	return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len);
+}
+
+int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s)
+{
+	char *st;
+
+	dfu->dev_type = DFU_DEV_RAM;
+	st = strsep(&s, " ");
+	if (strcmp(st, "ram")) {
+		printf("%s: unsupported device: %s\n", __func__, st);
+		return -ENODEV;
+	}
+
+	dfu->layout = DFU_RAM_ADDR;
+	dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16);
+	dfu->data.ram.size = simple_strtoul(++s, &s, 16);
+
+	dfu->write_medium = dfu_write_medium_ram;
+	dfu->read_medium = dfu_read_medium_ram;
+
+	dfu->inited = 0;
+
+	return 0;
+}
diff --git a/include/dfu.h b/include/dfu.h
index 6115d90..693ecb8 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -19,6 +19,7 @@ enum dfu_device_type {
 	DFU_DEV_MMC = 1,
 	DFU_DEV_ONENAND,
 	DFU_DEV_NAND,
+	DFU_DEV_RAM,
 };
 
 enum dfu_layout {
@@ -27,6 +28,7 @@ enum dfu_layout {
 	DFU_FS_EXT2,
 	DFU_FS_EXT3,
 	DFU_FS_EXT4,
+	DFU_RAM_ADDR,
 };
 
 enum dfu_op {
@@ -56,6 +58,11 @@ struct nand_internal_data {
 	unsigned int ubi;
 };
 
+struct ram_internal_data {
+	void		*start;
+	unsigned int	size;
+};
+
 static inline unsigned int get_mmc_blk_size(int dev)
 {
 	return find_mmc_device(dev)->read_bl_len;
@@ -81,6 +88,7 @@ struct dfu_entity {
 	union {
 		struct mmc_internal_data mmc;
 		struct nand_internal_data nand;
+		struct ram_internal_data ram;
 	} data;
 
 	int (*read_medium)(struct dfu_entity *dfu,
@@ -142,4 +150,14 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
 }
 #endif
 
+#ifdef CONFIG_DFU_RAM
+extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s);
+#else
+static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s)
+{
+	puts("RAM support not available!\n");
+	return -1;
+}
+#endif
+
 #endif /* __DFU_ENTITY_H_ */
-- 
1.8.2.135.g7b592fa

[U-Boot] [PATCH v2 2/3] dfu: ram support

[Lukasz Majewski]

Hi Afzal,

> DFU spec mentions it as a method to upgrade firmware (software stored
> in writable non-volatile memory). It also says other potential uses of
> DFU is beyond scope of the spec.
> 
> Here such a beyond the scope use is being attempted - directly pumping
> binary images from host via USB to RAM. This facility is a developer
> centric one in that it gives advantage over upgrading non-volatile
> memory for testing new images every time during development and/or
> testing.
> 
> Directly putting image onto RAM would speed up upgrade process. This
> and convenience was the initial thoughts that led to doing this, speed
> improvement over MMC was only 1 second though - 6 sec on RAM as
> opposed to 7 sec on MMC in beagle bone,

Which version of dfu-util do you use? I had slow transmission problem
with "ancient" dfu-util version 0.1.

> perhaps enabling cache and/or
> optimizing DFU framework to avoid multiple copy for ram (if worth)
> may help, and on other platforms and other boot media like NAND maybe
> improvement would be higher.
> 
> And for a platform that doesn't yet have proper DFU suppport for
> non-volatile media's, DFU to RAM can be used.
> 
> Another minor advantage would be to increase life of mmc/nand as it
> would be less used during development/testing.
> 
> usage: <image name> ram <start address> <size>
> eg. kernel ram 0x81000000 0x1000000
> 
> Downloading images to RAM using DFU is not something new, this is
> acheived in openmoko also.
> 
> DFU on RAM can be used for extracting RAM contents to host using dfu
> upload. Perhaps this can be extended to io for squeezing out register
> dump through usb, if it is worth.
> 
> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
> ---
> 
> v2: remove read/write enumerator define's, instead use new common ones
> 
>  drivers/dfu/Makefile  |  1 +
>  drivers/dfu/dfu.c     |  7 +++--
>  drivers/dfu/dfu_ram.c | 77
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> include/dfu.h         | 18 ++++++++++++ 4 files changed, 101
> insertions(+), 2 deletions(-) create mode 100644 drivers/dfu/dfu_ram.c
> 
> diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
> index fca370a..de9e44e 100644
> --- a/drivers/dfu/Makefile
> +++ b/drivers/dfu/Makefile
> @@ -12,6 +12,7 @@ LIB	= $(obj)libdfu.o
>  COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o
>  COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o
>  COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o
> +COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o
>  
>  SRCS    := $(COBJS-y:.o=.c)
>  OBJS	:= $(addprefix $(obj),$(COBJS-y))
> diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
> index d73d510..7b3d05d 100644
> --- a/drivers/dfu/dfu.c
> +++ b/drivers/dfu/dfu.c
> @@ -325,6 +325,9 @@ static int dfu_fill_entity(struct dfu_entity
> *dfu, char *s, int alt, } else if (strcmp(interface, "nand") == 0) {
>  		if (dfu_fill_entity_nand(dfu, s))
>  			return -1;
> +	} else if (strcmp(interface, "ram") == 0) {
> +		if (dfu_fill_entity_ram(dfu, s))
> +			return -1;
>  	} else {
>  		printf("%s: Device %s not (yet) supported!\n",
>  		       __func__,  interface);
> @@ -374,14 +377,14 @@ int dfu_config_entities(char *env, char
> *interface, int num) 
>  const char *dfu_get_dev_type(enum dfu_device_type t)
>  {
> -	const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" };
> +	const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND",
> "RAM" }; return dev_t[t];
>  }
>  
>  const char *dfu_get_layout(enum dfu_layout l)
>  {
>  	const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2",
> -					   "EXT3", "EXT4" };
> +					   "EXT3", "EXT4",
> "RAM_ADDR" }; return dfu_layout[l];
>  }
>  
> diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c
> new file mode 100644
> index 0000000..a603bfb
> --- /dev/null
> +++ b/drivers/dfu/dfu_ram.c
> @@ -0,0 +1,77 @@
> +/*
> + * (C) Copyright 2013
> + * Afzal Mohammed <afzal.mohd.ma@gmail.com>
> + *
> + * Reference: dfu_mmc.c
> + * Copyright (C) 2012 Samsung Electronics
> + * author: Lukasz Majewski <l.majewski@samsung.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <errno.h>
> +#include <dfu.h>
> +
> +static int dfu_transfer_medium_ram(enum dfu_op op, struct dfu_entity
> *dfu,
> +				   u64 offset, void *buf, long *len)
> +{
> +	if (dfu->layout != DFU_RAM_ADDR) {
> +		printf("%s: unsupported layout :%s\n", __func__,
> +		       dfu_get_layout(dfu->layout));
		
		Please use error() from ./include/common.h 
		Frankly, I've overlooked this when I originally
		developed the code.

> +		return  -EINVAL;
> +	}
> +
> +	if (offset > dfu->data.ram.size) {
> +		printf("%s: request exceeds allowed area\n",
> __func__);
		
		The same here.

> +		return -EINVAL;
> +	}
> +
> +	if (op == DFU_OP_WRITE)
> +		memcpy(dfu->data.ram.start + offset, buf, *len);
> +	else
> +		memcpy(buf, dfu->data.ram.start + offset, *len);
> +
> +	return 0;
> +}
> +
> +static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset,
> +				void *buf, long *len)
> +{
> +	return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset,
> buf, len); +}
> +
> +static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset,
> +			       void *buf, long *len)
> +{
> +	if (!*len) {
> +		*len = dfu->data.ram.size;
> +		return 0;
> +	}
> +
> +	return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset,
> buf, len); +}
> +
> +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s)
> +{
> +	char *st;
> +
> +	dfu->dev_type = DFU_DEV_RAM;
> +	st = strsep(&s, " ");
> +	if (strcmp(st, "ram")) {
> +		printf("%s: unsupported device: %s\n", __func__, st);

		And here

> +		return -ENODEV;
> +	}
> +
> +	dfu->layout = DFU_RAM_ADDR;
> +	dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16);
> +	dfu->data.ram.size = simple_strtoul(++s, &s, 16);
> +
> +	dfu->write_medium = dfu_write_medium_ram;
> +	dfu->read_medium = dfu_read_medium_ram;
> +
> +	dfu->inited = 0;
> +
> +	return 0;
> +}
> diff --git a/include/dfu.h b/include/dfu.h
> index 6115d90..693ecb8 100644
> --- a/include/dfu.h
> +++ b/include/dfu.h
> @@ -19,6 +19,7 @@ enum dfu_device_type {
>  	DFU_DEV_MMC = 1,
>  	DFU_DEV_ONENAND,
>  	DFU_DEV_NAND,
> +	DFU_DEV_RAM,
>  };
>  
>  enum dfu_layout {
> @@ -27,6 +28,7 @@ enum dfu_layout {
>  	DFU_FS_EXT2,
>  	DFU_FS_EXT3,
>  	DFU_FS_EXT4,
> +	DFU_RAM_ADDR,
>  };
>  
>  enum dfu_op {
> @@ -56,6 +58,11 @@ struct nand_internal_data {
>  	unsigned int ubi;
>  };
>  
> +struct ram_internal_data {
> +	void		*start;
> +	unsigned int	size;
> +};
> +
>  static inline unsigned int get_mmc_blk_size(int dev)
>  {
>  	return find_mmc_device(dev)->read_bl_len;
> @@ -81,6 +88,7 @@ struct dfu_entity {
>  	union {
>  		struct mmc_internal_data mmc;
>  		struct nand_internal_data nand;
> +		struct ram_internal_data ram;
>  	} data;
>  
>  	int (*read_medium)(struct dfu_entity *dfu,
> @@ -142,4 +150,14 @@ static inline int dfu_fill_entity_nand(struct
> dfu_entity *dfu, char *s) }
>  #endif
>  
> +#ifdef CONFIG_DFU_RAM
> +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s);
> +#else
> +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char
> *s) +{
> +	puts("RAM support not available!\n");
> +	return -1;
> +}
> +#endif
> +
>  #endif /* __DFU_ENTITY_H_ */

Only please change the printf() -> error().

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

[U-Boot] [PATCH v2 2/3] dfu: ram support

[Afzal Mohammed]

Hi Lukasz Majewski,

On Tue, Sep 10, 2013 at 11:21:44AM +0200, Lukasz Majewski wrote:

> > Directly putting image onto RAM would speed up upgrade process. This
> > and convenience was the initial thoughts that led to doing this, speed
> > improvement over MMC was only 1 second though - 6 sec on RAM as
> > opposed to 7 sec on MMC in beagle bone,

> Which version of dfu-util do you use? I had slow transmission problem
> with "ancient" dfu-util version 0.1.

0.7, there may be chances that USB (HS/FS) is causing the speed
difference. Here image size ~4M

> > +		printf("%s: unsupported layout :%s\n", __func__,
> > +		       dfu_get_layout(dfu->layout));

> 		Please use error() from ./include/common.h 
> 		Frankly, I've overlooked this when I originally
> 		developed the code.

> Only please change the printf() -> error().

Ok, I will change those.

Regards
Afzal

[U-Boot] [PATCH v2 3/3] am335x_evm: enable DFU RAM

[Afzal Mohammed]

Enable DFU for RAM, provide example dfu_alt_info

Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
---

v2: new

 include/configs/am335x_evm.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 7969e07..0449a1f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -100,6 +100,7 @@
 	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 	"importbootenv=echo Importing environment from mmc ...; " \
 		"env import -t $loadaddr $filesize\0" \
+	"dfu_alt_info_ram=" DFU_ALT_INFO_RAM "\0" \
 	"ramargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"root=${ramroot} " \
@@ -210,6 +211,11 @@
 	"kernel part 0 8;" \
 	"rootfs part 0 9"
 #endif
+#define CONFIG_DFU_RAM
+#define DFU_ALT_INFO_RAM \
+	"kernel ram 0x80200000 0xD80000;" \
+	"fdt ram 0x80F80000 0x80000;" \
+	"ramdisk ram 0x81000000 0x4000000"
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
-- 
1.8.2.135.g7b592fa

[U-Boot] [PATCH v2 3/3] am335x_evm: enable DFU RAM

[Lukasz Majewski]

Hi Afzal,

> Enable DFU for RAM, provide example dfu_alt_info
> 
> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
> Cc: Tom Rini <trini@ti.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
> ---
> 
> v2: new
> 
>  include/configs/am335x_evm.h | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/include/configs/am335x_evm.h
> b/include/configs/am335x_evm.h index 7969e07..0449a1f 100644
> --- a/include/configs/am335x_evm.h
> +++ b/include/configs/am335x_evm.h
> @@ -100,6 +100,7 @@
>  	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
>  	"importbootenv=echo Importing environment from mmc ...; " \
>  		"env import -t $loadaddr $filesize\0" \
> +	"dfu_alt_info_ram=" DFU_ALT_INFO_RAM "\0" \
>  	"ramargs=setenv bootargs console=${console} " \
>  		"${optargs} " \
>  		"root=${ramroot} " \
> @@ -210,6 +211,11 @@
>  	"kernel part 0 8;" \
>  	"rootfs part 0 9"
>  #endif
> +#define CONFIG_DFU_RAM
> +#define DFU_ALT_INFO_RAM \
> +	"kernel ram 0x80200000 0xD80000;" \
> +	"fdt ram 0x80F80000 0x80000;" \
> +	"ramdisk ram 0x81000000 0x4000000"
>  
>  /* NS16550 Configuration */
>  #define CONFIG_SYS_NS16550_COM1		0x44e09000	/*
> Base EVM has UART0 */

Seems OK for me (but I'm not AM335x maintainer).

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

[U-Boot] [PATCH v2 1/3] dfu: unify mmc/nand read/write ops enum

[Lukasz Majewski]

Hi Afzal,

> MMC and NAND independently defines same enumerators for read/write.
> Unify them by defining enum in dfu header. RAM support that is being
> added newly also can make use of it.
> 
> Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
> ---
> 
> v2: new
> 
>  drivers/dfu/dfu_mmc.c  | 9 ++-------
>  drivers/dfu/dfu_nand.c | 7 +------
>  include/dfu.h          | 5 +++++
>  3 files changed, 8 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
> index 0871a77..f942758 100644
> --- a/drivers/dfu/dfu_mmc.c
> +++ b/drivers/dfu/dfu_mmc.c
> @@ -13,16 +13,11 @@
>  #include <div64.h>
>  #include <dfu.h>
>  
> -enum dfu_mmc_op {
> -	DFU_OP_READ = 1,
> -	DFU_OP_WRITE,
> -};
> -
>  static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE)
>  				dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE];
>  static long dfu_file_buf_len;
>  
> -static int mmc_block_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
> +static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
>  			u64 offset, void *buf, long *len)
>  {
>  	char cmd_buf[DFU_CMD_BUF_SIZE];
> @@ -65,7 +60,7 @@ static int mmc_file_buffer(struct dfu_entity *dfu,
> void *buf, long *len) return 0;
>  }
>  
> -static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
> +static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu,
>  			void *buf, long *len)
>  {
>  	char cmd_buf[DFU_CMD_BUF_SIZE];
> diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
> index 0ec12cf..edbf5a9 100644
> --- a/drivers/dfu/dfu_nand.c
> +++ b/drivers/dfu/dfu_nand.c
> @@ -19,12 +19,7 @@
>  #include <jffs2/load_kernel.h>
>  #include <nand.h>
>  
> -enum dfu_nand_op {
> -	DFU_OP_READ = 1,
> -	DFU_OP_WRITE,
> -};
> -
> -static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu,
> +static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
>  			u64 offset, void *buf, long *len)
>  {
>  	loff_t start, lim;
> diff --git a/include/dfu.h b/include/dfu.h
> index 47b9055..6115d90 100644
> --- a/include/dfu.h
> +++ b/include/dfu.h
> @@ -29,6 +29,11 @@ enum dfu_layout {
>  	DFU_FS_EXT4,
>  };
>  
> +enum dfu_op {
> +	DFU_OP_READ = 1,
> +	DFU_OP_WRITE,
> +};
> +
>  struct mmc_internal_data {
>  	/* RAW programming */
>  	unsigned int lba_start;


Acked-by: Lukasz Majewski <l.majewski@samsung.com>

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group