From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 10 Oct 2013 02:42:40 +0200
Subject: [U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net
	driver
In-Reply-To: <63F59710-432C-42D8-8571-48E7C5993F75@gmail.com>
References: <1381203058-4588-1-git-send-email-suriyan.r@gmail.com>
	<201310100239.24877.marex@denx.de>
	<63F59710-432C-42D8-8571-48E7C5993F75@gmail.com>
Message-ID: <201310100242.40989.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Joe Hershberger,

> On Oct 9, 2013, at 6:39 PM, Marek Vasut <marex@denx.de> wrote:
> > Dear Simon Glass,
> > 
> >> +Joe (net maintainer)
> >> +Marek (USB)
> >> 
> >> Hi Suriyan,
> >> 
> >> On Mon, Oct 7, 2013 at 9:30 PM, Suriyan Ramasami 
<suriyan.r@gmail.com>wrote:
> >>> Add LED activity for SMSX95XX USB Ether driver.
> >>> 
> >>> Signed-off-by: ?Suriyan Ramasami" <suriyan.r@gmail.com>
> >>> ---
> >>> 
> >>> drivers/usb/eth/smsc95xx.c |   14 ++++++++++++++
> >>> 1 files changed, 14 insertions(+), 0 deletions(-)
> >>> 
> >>> diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
> >>> index 15fd9a9..7bf0a34 100644
> >>> --- a/drivers/usb/eth/smsc95xx.c
> >>> +++ b/drivers/usb/eth/smsc95xx.c
> >>> @@ -14,6 +14,12 @@
> >>> 
> >>> /* SMSC LAN95xx based USB 2.0 Ethernet Devices */
> >>> 
> >>> +/* LED defines */
> >>> +#define LED_GPIO_CFG                   (0x24)
> >>> +#define LED_GPIO_CFG_SPD_LED           (0x01000000)
> >>> +#define LED_GPIO_CFG_LNK_LED           (0x00100000)
> >>> +#define LED_GPIO_CFG_FDX_LED           (0x00010000)
> >>> +
> >>> 
> >>> /* Tx command words */
> >>> #define TX_CMD_A_FIRST_SEG_            0x00002000
> >>> #define TX_CMD_A_LAST_SEG_             0x00001000
> >>> 
> >>> @@ -591,6 +597,14 @@ static int smsc95xx_init(struct eth_device *eth,
> >>> bd_t *bd)
> >>> 
> >>>                return ret;
> >>>        
> >>>        debug("ID_REV = 0x%08x\n", read_buf);
> >>> 
> >>> +       /* Configure GPIO pins as LED outputs */
> >>> +       write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
> >>> +               LED_GPIO_CFG_FDX_LED;
> >>> +       ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
> >>> +       if (ret < 0)
> >>> +               return ret;
> >>> +       debug("LED_GPIO_CFG set\n");
> >>> +
> >> 
> >> Seems good.
> >> 
> >> Acked-by: Simon Glass <sjg@chromium.org>
> > 
> > Applied to usb/next
> > 
> > I kinda wonder if Joe shouldn't pick this one. Is Joe still active ?
> 
> Sure... When I need to be.

Heh :) Haven't seen you on IRC for a while (and you surely missed a lot, applied 
for sjg too). I picked this patch, so no problem here.

Best regards,
Marek Vasut