From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anatolij Gustschin <agust@denx.de>
Date: Tue, 12 Nov 2013 09:48:19 +0100
Subject: [U-Boot] [PATCH v3 2/2] video: bcm2835: respect the pitch value
In-Reply-To: <1383991673-2928-1-git-send-email-agust@denx.de>
References: <1382637641-1919-1-git-send-email-a.heider@gmail.com>
	<1383991673-2928-1-git-send-email-agust@denx.de>
Message-ID: <20131112094819.17b8af3a@crub>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Sat,  9 Nov 2013 11:07:53 +0100
Anatolij Gustschin <agust@denx.de> wrote:

> From: Andre Heider <a.heider@gmail.com>
> 
> Depending on the firmware's video options [1] the active SDTV or
> HDTV mode can yield a framebuffer with noncontiguous horizontal lines,
> giving a messed up display, for both, u-boot and the loaded kernel.
> 
> Fix this by setting lcd_line_length to the pitch value of the configured
> framebuffer.
> 
> [1] http://elinux.org/RPiconfig#Video_mode_options
> 
> Signed-off-by: Andre Heider <a.heider@gmail.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
> Changes in v3:
>  - set lcd_line_length by driver specific lcd_get_size() since
>    setting it in lcd_enable() is not correct. This patch version
>    depends on patch http://patchwork.ozlabs.org/patch/289957
>    Please test these both patches on rpi_b, thanks!
> 
>  drivers/video/bcm2835.c |   11 +++++++++++
>  1 file changed, 11 insertions(+)

applied to u-boot-video/master, thanks!

Anatolij