[U-Boot] Pull request - arm/zynq v3

[U-Boot] Pull request - arm/zynq v3

[Michal Simek]

Hi Albert,

please pull these 3 zynq patches to your arm tree.
I have rebased the tree on the 2013.07 to remove that new nds32 patches.

There is still pending the arm: lds: Remove libgcc eabi exception handling tables
patch. Have you considered to also add it?

v3:
- Rebase on the v2013.07 because Albert didn't want to nds32 stuff

v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now

Thanks.
Michal


The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:

  Prepare v2013.07 (2013-07-23 07:58:13 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2:

  zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)

----------------------------------------------------------------
Michal Simek (3):
      zynq: Add new ddrc driver for ECC support
      zynq: slcr: Wait 100ms till clk is properly setup
      zynq: Enable axi ethernet and emaclite driver initialization

 arch/arm/cpu/armv7/zynq/Makefile           |  1 +
 arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
 arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
 arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
 board/xilinx/zynq/board.c                  | 19 ++++++++++++
 6 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130819/514970c3/attachment.pgp>

[U-Boot] Pull request - arm/zynq v3

[Albert ARIBAUD]

Hi Michal,

On Mon, 19 Aug 2013 09:36:33 +0200, Michal Simek <monstr@monstr.eu>
wrote:

> Hi Albert,
> 
> please pull these 3 zynq patches to your arm tree.
> I have rebased the tree on the 2013.07 to remove that new nds32 patches.
> 
> There is still pending the arm: lds: Remove libgcc eabi exception handling tables
> patch. Have you considered to also add it?
> 
> v3:
> - Rebase on the v2013.07 because Albert didn't want to nds32 stuff
> 
> v2:
> - Changed email address,
> - There was incorrect rebase which I have fixed - correct sha1 now
> 
> Thanks.
> Michal
> 
> 
> The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:
> 
>   Prepare v2013.07 (2013-07-23 07:58:13 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-microblaze.git zynq
> 
> for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2:
> 
>   zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
> 
> ----------------------------------------------------------------
> Michal Simek (3):
>       zynq: Add new ddrc driver for ECC support
>       zynq: slcr: Wait 100ms till clk is properly setup
>       zynq: Enable axi ethernet and emaclite driver initialization
> 
>  arch/arm/cpu/armv7/zynq/Makefile           |  1 +
>  arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
>  arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
>  arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
>  board/xilinx/zynq/board.c                  | 19 ++++++++++++
>  6 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

[U-Boot] Pull request - arm/zynq v3

[Michal Simek]

On 09/03/2013 02:12 PM, Albert ARIBAUD wrote:
> Hi Michal,
> 
> On Mon, 19 Aug 2013 09:36:33 +0200, Michal Simek <monstr@monstr.eu>
> wrote:
> 
>> Hi Albert,
>>
>> please pull these 3 zynq patches to your arm tree.
>> I have rebased the tree on the 2013.07 to remove that new nds32 patches.
>>
>> There is still pending the arm: lds: Remove libgcc eabi exception handling tables
>> patch. Have you considered to also add it?
>>
>> v3:
>> - Rebase on the v2013.07 because Albert didn't want to nds32 stuff
>>
>> v2:
>> - Changed email address,
>> - There was incorrect rebase which I have fixed - correct sha1 now
>>
>> Thanks.
>> Michal
>>
>>
>> The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:
>>
>>   Prepare v2013.07 (2013-07-23 07:58:13 -0400)
>>
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-microblaze.git zynq
>>
>> for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2:
>>
>>   zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
>>
>> ----------------------------------------------------------------
>> Michal Simek (3):
>>       zynq: Add new ddrc driver for ECC support
>>       zynq: slcr: Wait 100ms till clk is properly setup
>>       zynq: Enable axi ethernet and emaclite driver initialization
>>
>>  arch/arm/cpu/armv7/zynq/Makefile           |  1 +
>>  arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
>>  arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
>>  arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
>>  arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
>>  board/xilinx/zynq/board.c                  | 19 ++++++++++++
>>  6 files changed, 80 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
>>
>>
> 
> Applied to u-boot-arm/master, thanks!
> 

Thanks.

What about this patch "arm: lds: Remove libgcc eabi exception handling tables"?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130904/dccd4edd/attachment.pgp>

[U-Boot] Pull request - arm/zynq

[Michal Simek]

Hi Albert,

please pull these two patches to your arm next branch.
It depends on "zynq: Use arch_cpu_init() instead of lowlevel_init()"
(sha1: 262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch
which you have in your branch that's why I have rebased them
on the top.

Thanks,
Michal


The following changes since commit c0e5dd88c438a41bf180dde0c2dc4c67dcd8058d:

  Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-11-05 20:50:39 +0100)

are available in the git repository at:


  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to b5f05b063413245e3d29186739fb5db98d137dfd:

  arm: zynq : Revert TZ_DDR_RAM to secure. (2013-11-06 09:24:06 +0100)

----------------------------------------------------------------
Michal Simek (1):
      arm: zynq: Do not remap OCM to high address

Radhey Shyam Pandey (1):
      arm: zynq : Revert TZ_DDR_RAM to secure.

 arch/arm/cpu/armv7/zynq/cpu.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131106/483c5ecd/attachment.pgp>

[U-Boot] Pull request - arm/zynq

[Albert ARIBAUD]

Hi Michal,

On Wed, 06 Nov 2013 09:28:16 +0100, Michal Simek <monstr@monstr.eu>
wrote:

> Hi Albert,
> 
> please pull these two patches to your arm next branch.
> It depends on "zynq: Use arch_cpu_init() instead of lowlevel_init()"
> (sha1: 262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch
> which you have in your branch that's why I have rebased them
> on the top.
> 
> Thanks,
> Michal

Is this really for 'next' and not 'master'? IOW, do you really mean it
*not* to go into 2014.01?

Amicalement,
-- 
Albert.

[U-Boot] Pull request - arm/zynq

[Michal Simek]

Hi Albert,

On 11/07/2013 10:50 AM, Albert ARIBAUD wrote:
> Hi Michal,
> 
> On Wed, 06 Nov 2013 09:28:16 +0100, Michal Simek <monstr@monstr.eu>
> wrote:
> 
>> Hi Albert,
>>
>> please pull these two patches to your arm next branch.
>> It depends on "zynq: Use arch_cpu_init() instead of lowlevel_init()"
>> (sha1: 262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch
>> which you have in your branch that's why I have rebased them
>> on the top.
>>
>> Thanks,
>> Michal
> 
> Is this really for 'next' and not 'master'? IOW, do you really mean it
> *not* to go into 2014.01?

Every maintainer has different strategies for branches.
But anyway, I want to add these patches/fixes to the 2014.01.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131107/7f189bff/attachment.pgp>

[U-Boot] Pull request - arm/zynq

[Albert ARIBAUD]

Hi Michal,

On Wed, 06 Nov 2013 09:28:16 +0100, Michal Simek <monstr@monstr.eu>
wrote:

> Hi Albert,
> 
> please pull these two patches to your arm next branch.
> It depends on "zynq: Use arch_cpu_init() instead of lowlevel_init()"
> (sha1: 262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch
> which you have in your branch that's why I have rebased them
> on the top.
> 
> Thanks,
> Michal
> 
> 
> The following changes since commit c0e5dd88c438a41bf180dde0c2dc4c67dcd8058d:
> 
>   Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-11-05 20:50:39 +0100)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-microblaze.git zynq
> 
> for you to fetch changes up to b5f05b063413245e3d29186739fb5db98d137dfd:
> 
>   arm: zynq : Revert TZ_DDR_RAM to secure. (2013-11-06 09:24:06 +0100)
> 
> ----------------------------------------------------------------
> Michal Simek (1):
>       arm: zynq: Do not remap OCM to high address
> 
> Radhey Shyam Pandey (1):
>       arm: zynq : Revert TZ_DDR_RAM to secure.
> 
>  arch/arm/cpu/armv7/zynq/cpu.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

[U-Boot] Pull request - arm/zynq

[Michal Simek]

Hi Albert,

please pull these 3 zynq patches to your arm tree.

There is still pending the arm: lds: Remove libgcc eabi exception handling tables
patch. Have you considered to also add it?

Thanks.
Michal

The following changes since commit c85c7faf476a3f77389f71d898ced6a326a8c691:

  nds32: fix the missing COBJS-y change (2013-08-12 07:55:48 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 7264e506bdc529c142b4377e4e7c8f8fdc1b1230:

  zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 07:56:23 +0200)

----------------------------------------------------------------
Michal Simek (3):
      zynq: Add new ddrc driver for ECC support
      zynq: slcr: Wait 100ms till clk is properly setup
      zynq: Enable axi ethernet and emaclite driver initialization

 arch/arm/cpu/armv7/zynq/Makefile           |  1 +
 arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
 arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
 arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
 board/xilinx/zynq/board.c                  | 19 ++++++++++++
 6 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c