From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Tue, 10 Dec 2013 13:21:42 +0100
Subject: [U-Boot] [PATCH] serial: zynq: Remove unused #defines
In-Reply-To: <52A70503.508@monstr.eu>
References: <8f583fe620e6a1606568f05a5d31486bb50e4caf.1383144568.git.michal.simek@xilinx.com>
	<20131210130637.00779cd1@lilith> <52A70503.508@monstr.eu>
Message-ID: <20131210132142.3545f703@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Michal,

On Tue, 10 Dec 2013 13:11:47 +0100, Michal Simek <monstr@monstr.eu>
wrote:

> On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
> > Hi Michal,
> > 
> > On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
> > <michal.simek@xilinx.com> wrote:
> > 
> >> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >>
> >> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> >> ---
> >>  drivers/serial/serial_zynq.c | 4 ----
> >>  1 file changed, 4 deletions(-)
> >>
> >> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
> >> index 050b9c0..ff28f3c 100644
> >> --- a/drivers/serial/serial_zynq.c
> >> +++ b/drivers/serial/serial_zynq.c
> >> @@ -21,10 +21,6 @@
> >>
> >>  #define ZYNQ_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
> >>
> >> -/* Some clock/baud constants */
> >> -#define ZYNQ_UART_BDIV	15 /* Default/reset BDIV value */
> >> -#define ZYNQ_UART_BASECLK	3125000L /* master / (bdiv + 1) */
> >> -
> >>  struct uart_zynq {
> >>  	u32 control; /* Control Register [8:0] */
> >>  	u32 mode; /* Mode Register [10:0] */
> >> --
> >> 1.8.2.3
> >>
> > 
> > Applied to u-boot-arm/master, thanks!
> 
> This has been already applied to Tom's tree.

Well then, it was in my patchwork todo in error. :)

But never mind: it'll merge just fine, that's what git is for.

> Thanks,
> Michal

Amicalement,
-- 
Albert.