From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 13 Dec 2013 08:37:32 -0500 Subject: [U-Boot] Please pull u-boot-ti In-Reply-To: <20131213142923.4bd72f90@lilith> References: <20131213124539.GL420@bill-the-cat> <20131213142923.4bd72f90@lilith> Message-ID: <20131213133732.GF420@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Dec 13, 2013 at 02:29:23PM +0100, Albert ARIBAUD wrote: > Hi Tom, > > On Fri, 13 Dec 2013 07:45:39 -0500, Tom Rini wrote: > > > Hello, > > > > The following changes since commit a5a42eec8ed64cbc72d2e59199819e48f904e38f: > > > > ARM: fix the standalone programs (2013-12-12 11:27:59 +0100) > > > > are available in the git repository at: > > > > git://git.denx.de/u-boot-ti.git master > > > > for you to fetch changes up to d2c7074b9593d822e2359a09c21747248fdf5fac: > > > > ARM: OMAP5: clocks: Update MPU settings for OPP_NOM (2013-12-12 17:43:39 -0500) > > > > ---------------------------------------------------------------- > > Dan Murphy (1): > > arm: am437: Fix offset for USB registers > > > > Heiko Schocher (1): > > am335x, siemens boards: adapt default environment setting > > > > Lokesh Vutla (3): > > ARM: OMAP4: Move TEXT_BASE down to non-HS limit > > ARM: DRA7xx: Change clk divider setting > > ARM: OMAP5: clocks: Update MPU settings for OPP_NOM > > > > Nikita Kiryanov (2): > > arm: omap: abb: add missing include > > arm: omap: cm_t35: update config file > > > > Stefan Roese (5): > > arm: omap3: Add SPL support to tao3530 > > arm: omap3: Remove bootargs mem_size handling > > arm: omap3: Add board revision output to tao3530 > > arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530 > > arm: omap3: Add SPL support to cm_t35 > > > > Tapani Utriainen (1): > > arm, omap3: Add support for TechNexion modules > > > > Tom Rini (2): > > am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF > > am335x_evm: Consolidate DFU environment parts into the DFU part of the file > > > > Yegor Yefremov (1): > > am3517_evm: activate Ethernet PHY > > > > arch/arm/cpu/armv7/am33xx/board.c | 8 + > > arch/arm/cpu/armv7/omap-common/abb.c | 1 + > > arch/arm/cpu/armv7/omap5/hw_data.c | 24 +- > > arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 4 +- > > arch/arm/include/asm/arch-omap4/omap.h | 2 +- > > board/compulab/cm_t35/cm_t35.c | 18 +- > > board/logicpd/am3517evm/am3517evm.c | 32 ++ > > board/logicpd/am3517evm/am3517evm.h | 2 +- > > board/siemens/common/board.c | 9 - > > board/technexion/tao3530/Makefile | 5 + > > board/technexion/tao3530/tao3530.c | 215 ++++++++++++ > > board/technexion/tao3530/tao3530.h | 371 ++++++++++++++++++++ > > boards.cfg | 2 + > > include/configs/am335x_evm.h | 23 +- > > include/configs/am3517_evm.h | 5 + > > include/configs/cm_t35.h | 74 +++- > > include/configs/omap4_common.h | 11 +- > > include/configs/siemens-am33x-common.h | 2 +- > > include/configs/tao3530.h | 363 +++++++++++++++++++ > > 19 files changed, 1121 insertions(+), 50 deletions(-) > > create mode 100644 board/technexion/tao3530/Makefile > > create mode 100644 board/technexion/tao3530/tao3530.c > > create mode 100644 board/technexion/tao3530/tao3530.h > > create mode 100644 include/configs/tao3530.h > > Build-testing. > > Meanwhile: > > remote: error: refs/remotes/origin/GPL-Cleanup does not point to a > valid object! > remote: error: refs/remotes/origin/i.MX31 does not point to a valid > object! > remote: error: refs/remotes/origin/lwmon5 does not point to a valid > object! Wolfgang, any idea about this part? -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: