From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Date: Wed, 18 Dec 2013 15:07:47 -0500 [thread overview]
Message-ID: <20131218200747.GC420@bill-the-cat> (raw)
In-Reply-To: <1386667944-20748-1-git-send-email-lokeshvutla@ti.com>
On Tue, Dec 10, 2013 at 03:02:10PM +0530, Lokesh Vutla wrote:
> This Patch series updates support for AM4372 EPOS and GP EVM boards.
> AM4372 is a low cost Cortex-A9 based application processor targeted at existing
> ARM9/ARM11 base of customers that need more processing capabilities.
> Currently there are two boards with AM4372 SoC: EPOS and GP EVM.
> Except for few differences like oscillator clock and SDRAM both EPOS and GP EVM
> boards are similar.
> EPOS EVM:
> OSC clk : 25MHz
> DDR : LPDDR2 @ 266MHz (MT42L256M32D2LG-25 WT:A)
> GP EVM:
> OSC clk : 24MHz
> DDR : DDR3 @ 400MHz(MT41K512M8RH)
>
> This patch series is applied on top of Mainline U-Boot Tree and two
> patches mentioned below:
> git://git.denx.de/u-boot.git master
> http://patchwork.ozlabs.org/patch/288175/
>
> Testing:
> -> Boot tested on AM4372 EPOS and GP EVMs, Beaglebone Black.
> -> verified MAKEALL -s am33xx.
> -> Ran checkpatch on all patches.
>
> Changes Since V2:
> -> Updating the base offsets only for AM43xx
> -> Populated DPLLs data for all OPPs and SYS CLK inputs and the correct values
> to be read from eFuse.
> -> Seperated out ioregs changes into a new patch.
>
> Changes Since V1:
> As per Vaibhav's and Tom's Comments:
> -> Updated the mux data not to use DSPULLUDEN.
> -> Reused the emif4d file for configuring emif4d5 registers.
> -> Updated the code with comments.
> -> Rebased on top of Current U-Boot mainline.
>
> Lokesh Vutla (12):
> ARM: AM43xx: Update the base addresses of modules
> ARM: AM43xx: Adapt to ti_armv7_common.h config file
> ARM: AM43xx: Add L2 Support
> ARM: AM43xx: Add extra ENV settings
> ARM: AM43xx: Select clk source for Timer2
> ARM: AM43xx: Update Current Booting devices list
> ARM: AM43xx: mux: Update mux data
> ARM: AM43xx: clocks: Update DPLL details
> ARM: AM33xx+: Update ioregs to pass different values
> ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
> ARM: AM43xx: GP_EVM: Add support for DDR3
> ARM: AM43xx: Add Maintainer
>
> Sekhar Nori (2):
> ARM: AM43XX: board: add support for reading onboard EEPROM
> ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
>
> arch/arm/cpu/armv7/am33xx/clock.c | 12 +-
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 +
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +-
> arch/arm/cpu/armv7/am33xx/ddr.c | 146 +++++++-
> arch/arm/cpu/armv7/am33xx/emif4.c | 25 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 14 -
> arch/arm/include/asm/arch-am33xx/clock.h | 7 +-
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 24 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 ++-
> arch/arm/include/asm/arch-am33xx/gpio.h | 12 +
> arch/arm/include/asm/arch-am33xx/hardware.h | 7 -
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 +
> arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 16 +
> arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +++
> arch/arm/include/asm/arch-am33xx/omap.h | 4 +-
> arch/arm/include/asm/arch-am33xx/spl.h | 13 +-
> arch/arm/include/asm/emif.h | 26 ++
> board/isee/igep0033/board.c | 10 +-
> board/phytec/pcm051/board.c | 12 +-
> board/siemens/dxr2/board.c | 10 +-
> board/siemens/pxm2/board.c | 10 +-
> board/siemens/rut/board.c | 10 +-
> board/ti/am335x/board.c | 40 ++-
> board/ti/am43xx/board.c | 355 +++++++++++++++++++-
> board/ti/am43xx/board.h | 36 ++
> board/ti/am43xx/mux.c | 35 +-
> board/ti/ti814x/evm.c | 4 +-
> board/ti/ti816x/evm.c | 12 +-
> boards.cfg | 2 +-
> include/configs/am43xx_evm.h | 204 +++++------
> 31 files changed, 983 insertions(+), 181 deletions(-)
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131218/31e87405/attachment.pgp>
next prev parent reply other threads:[~2013-12-18 20:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-10 9:32 [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 01/14] ARM: AM43xx: Update the base addresses of modules Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 03/14] ARM: AM43xx: Add L2 Support Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 04/14] ARM: AM43xx: Add extra ENV settings Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 07/14] ARM: AM43xx: Select clk source for Timer2 Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 08/14] ARM: AM43xx: Update Current Booting devices list Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 09/14] ARM: AM43xx: mux: Update mux data Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 10/14] ARM: AM43xx: clocks: Update DPLL details Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 11/14] ARM: AM33xx+: Update ioregs to pass different values Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2 Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3 Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 14/14] ARM: AM43xx: Add Maintainer Lokesh Vutla
2013-12-15 8:36 ` [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC Vaibhav Bedia
2013-12-18 20:07 ` Tom Rini [this message]
2013-12-19 17:00 ` Tom Rini
2013-12-19 17:57 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131218200747.GC420@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox